Search the archive:
YaBB - Yet another Bulletin Board
 
   
 
Pages: 1 2 
Send Topic Print
Ranting - Not at the demo tho... (Read 19 times)
Aug 16th, 2006 at 10:49am

Ashton Lawson   Offline
Colonel
FS Water Configurator
Programmer
Phuket, Thailand

Gender: male
Posts: 1211
*****
 
My graphics card.  Since the release of the FSX Demo, my graphics card has gone from out-dated to utter ****. Cry

And my graphics card is taking its revenge on FSX!  I've put all the settings on the lowest possible.  And it still gives a smooth session of about 3-4 secs, then freezes for 3-4 secs, and keeps going in this loop. Angry

Someone, please tell me i'm not the only one with this issue! Angry
 

...&&FS Water Configurator+ has new modifications in the works, plus DirectX 10, Service Pack&&1, and Radeon HD 3+ Series support.
IP Logged
 
Reply #1 - Aug 16th, 2006 at 10:56am

Woodlouse2002   Offline
Colonel
I like jam.
Cornwall, England

Gender: male
Posts: 12574
*****
 
Dude, your gforce4mx card was outclassed by the ti range when it was new. Even for Fs2002 it was less than brilliant.
 

Woodlouse2002 PITA and BAR!!!!!!!!&&&&Our Sovereign Lord the King chargeth and commandeth all persons, being assembled, immediately to disperse themselves, and peaceably to depart to their habitations, or to their lawful business, upon the pains contained in the Act made in the first year of King George the First for preventing tumults and riotous assemblies. God Save the King.&&&&Viva la revolution!
IP Logged
 
Reply #2 - Aug 17th, 2006 at 4:09am

Ashton Lawson   Offline
Colonel
FS Water Configurator
Programmer
Phuket, Thailand

Gender: male
Posts: 1211
*****
 
Actually, FS2002 worked with full settings on default aircraft, and in highly populated areas at a pretty good 30fps.  The only time it ever took long, was when I was trying out high-def aircraft/scenery, or anything else which was higher quality than FS2002 itself.  I could even have 2 screens going.  My monitor, and my TV!
 

...&&FS Water Configurator+ has new modifications in the works, plus DirectX 10, Service Pack&&1, and Radeon HD 3+ Series support.
IP Logged
 
Reply #3 - Aug 17th, 2006 at 9:24am

Woodlouse2002   Offline
Colonel
I like jam.
Cornwall, England

Gender: male
Posts: 12574
*****
 
You never missed the reflective textures on the aircraft then?
 

Woodlouse2002 PITA and BAR!!!!!!!!&&&&Our Sovereign Lord the King chargeth and commandeth all persons, being assembled, immediately to disperse themselves, and peaceably to depart to their habitations, or to their lawful business, upon the pains contained in the Act made in the first year of King George the First for preventing tumults and riotous assemblies. God Save the King.&&&&Viva la revolution!
IP Logged
 
Reply #4 - Aug 17th, 2006 at 2:07pm

VOHY_VO0I   Offline
Colonel
I love YaBB 1G - SP1!

Posts: 175
*****
 
Hats off to you for still playing FS with an 8 mb card Shocked.

Your ram would also affect the frame rates., try getting a higher one.
 

Watch the 7-minute flash video --- Sign up for the free trial --- Start earning online&&www.freedom.ws/daneshk
IP Logged
 
Reply #5 - Aug 17th, 2006 at 2:35pm
cheesegrater   Ex Member

 
Quote:
Hats off to you for still playing FS with an 8 mb card Shocked.

Your ram would also affect the frame rates., try getting a higher one.


Geforce 4 MX is 64MB or 128MB depending on the model.

New RAM? How about a new system? Is too slow for FSX even with a new card and RAM.
 
IP Logged
 
Reply #6 - Aug 18th, 2006 at 11:13pm

Ashton Lawson   Offline
Colonel
FS Water Configurator
Programmer
Phuket, Thailand

Gender: male
Posts: 1211
*****
 
Wait...  Yes...  YYYYYEEEEEESSSS!!!!!!! Grin

I can play FSX with a okay-frame rate! All sliders and stuff are on 0, except every type of traffic (AI, AV, RT, ST, AT) are on 4%, and aircraft shadows are on.  It turns out that my graphics card settings were on quality the first time.  Now its on extreme performance (if you can call it that). Tongue

Quote:
You never missed the reflective textures on the aircraft then?

In FS2002, I still got a decent frame rate with reflective textures. Wink

Quote:
Geforce 4 MX is 64MB or 128MB depending on the model.

My model (sadly) is the 64mb model... Cry

Quote:
New RAM? How about a new system? Is too slow for FSX even with a new card and RAM.

I am gonna get a new PC once DX10 is release.  See details in my signature... Roll Eyes

Warning:  To all who have a GeForce 4 (or worse), if you like flying deHaviland Beavers, or Learjets in their VCs, then don't download FSX Demo.  Those VCs, don't have a windsheild (you can't see through them, because of the graphics card compatibility). Cry
If you like flying Ultralights and Baron 58s, then download it... Wink
 

...&&FS Water Configurator+ has new modifications in the works, plus DirectX 10, Service Pack&&1, and Radeon HD 3+ Series support.
IP Logged
 
Reply #7 - Aug 19th, 2006 at 12:31am

Katahu   Offline
Colonel

Gender: male
Posts: 6920
*****
 
My "other" computer's setup [it's a desktop]:

P4 2.8GHz
512MB RAM
Geforce 4 MX440 128MB

My "main" computer's setup [it's a laptop]:

P4 2.8GHz
512MB RAM
ATI Radeon 9700 64MB

The funny thing about my laptop is that it's more powerful than the other one. Of course, it's because my laptop's hardware is DX9-based compared to the DX8-based hardware of the other one. But it's still funny to see a "tiny" computer beat a "bug, hunking" tower PC. Grin

But then there is my "dad's" laptop. This one is made for business and DVDs compared to mine yet it beats the crud out of my laptop by 10FPS when tested with the FSX demo. I think it's because of the dual core 64bit processor that it has. Grin
 
IP Logged
 
Reply #8 - Aug 19th, 2006 at 12:52am

Ashton Lawson   Offline
Colonel
FS Water Configurator
Programmer
Phuket, Thailand

Gender: male
Posts: 1211
*****
 
Are you gonna get a new PC which is DX10 compatible just for FSX (and any other new versions)?
 

...&&FS Water Configurator+ has new modifications in the works, plus DirectX 10, Service Pack&&1, and Radeon HD 3+ Series support.
IP Logged
 
Reply #9 - Aug 19th, 2006 at 1:59am

Daube   Offline
Colonel
Alternative bloomer
Nice (FR)

Gender: male
Posts: 5833
*****
 
I'm not really sure a 2.8 GHz Pentium would be THAT slow for FSX. The main bottleneck there is the amount of memory and the graphic card. My guess is that an initial upgrade of those two elements would help a lot for the frames...a LOT !
 
IP Logged
 
Reply #10 - Aug 19th, 2006 at 2:11am

Ashton Lawson   Offline
Colonel
FS Water Configurator
Programmer
Phuket, Thailand

Gender: male
Posts: 1211
*****
 
Yah, i know.

But still, i'm justing lasting with my graphics card now.  My future PC is gonna kick ass.
 

...&&FS Water Configurator+ has new modifications in the works, plus DirectX 10, Service Pack&&1, and Radeon HD 3+ Series support.
IP Logged
 
Reply #11 - Aug 19th, 2006 at 6:06am
PisTon   Ex Member

 
Buy a tempoary graphics card.

6800XT or something that's slow, but supports DX9.
 
IP Logged
 
Reply #12 - Aug 19th, 2006 at 6:23pm

TSC.   Offline
Colonel
The older I get, the better
I was...
Torquay, Devon, England.

Gender: male
Posts: 5132
*****
 
Quote:
 It turns out that my graphics card settings were on quality the first time.  Now its on extreme performance (if you can call it that).

Str1ker sir - you are a legend today! You see, i'm utter crap when it comes to settings & what-not & for ages I have only been able to get decent frame rates in FS9 with decent weather - so I just checked my card settings & set them to performace instead of quality & hurrah!! I can now fly in all sorts of 'orrible weather with return of 20-30fps - which means landings are now possible without HUGE frame delays.

Big thanks,

TSC.
 

...

'Only two things are infinite.......The Universe and Human stupidity........and I'm not too sure about the Universe' - Einstein
IP Logged
 
Reply #13 - Aug 21st, 2006 at 3:44am

Ashton Lawson   Offline
Colonel
FS Water Configurator
Programmer
Phuket, Thailand

Gender: male
Posts: 1211
*****
 
I'm not sure about ur post.  Your signature makes me weary.
If I helped, great.  If i'm a legend in my own time, cool!
 

...&&FS Water Configurator+ has new modifications in the works, plus DirectX 10, Service Pack&&1, and Radeon HD 3+ Series support.
IP Logged
 
Reply #14 - Aug 21st, 2006 at 4:57am

TSC.   Offline
Colonel
The older I get, the better
I was...
Torquay, Devon, England.

Gender: male
Posts: 5132
*****
 
I can see where the confusion can creep in there, but that post was quite sincere, have a look here, these were posted yesterday.

I may still play around with the settings for a while to find a happy medium.

Cheers,

TSC.
 

...

'Only two things are infinite.......The Universe and Human stupidity........and I'm not too sure about the Universe' - Einstein
IP Logged
 
Pages: 1 2 
Send Topic Print