Bpilot, I think your choice of aircraft is great...hey, it's a Bus after all. There's quite a bit we can discuss on improving your shot. I think the first area we should approach is trying to eliminate or reduce the jagged edges you see along the body of the aircraft. I think we should proceed here slowly, one step at a time, and hopefully before long you'll be a screenartist master. Now, on to jagged edges. The issue is called aliasing and there's one or two things we should look at in trying to reduce this problem. First have a look (read) this aliasing tutorial by LVA157 http://www.simviation.com/cgi-bin/yabb/YaBB.cgi?board=studiov;action=display;num...

Next up, it's important to know if you have a video card installed in your computer or integrated graphics.  If you do have a video card then turn anti-aliasing off in FS9 graphics settings and turn it on on your card. Start with the 2x setting. If you still see jaggies, turn your vid card AA setting 1 notch higher. If you don't have a video card, go into FS9- graphics settings-video and look for "filtering" Set it to "trilinear". It's probably set on bi-linear now. Next try a higher screen resolution in your FS9- graphics-hardware settings area. Experiment with a couple of different settings eg. 1280 x 1024 etc...It would be helpful if you posted a few of your computers' basic specifications, including which video card you have (if indeed you have one). Let's start there and post a new pic if you see progress.