|
I have an excellent Cessna 120, done as freeware by Bill Lyons two or three years ago for FS-2000. I want to use this airplane in FS-2002 but there is a problem. The sound file, probably the best Continental 85 HP engine sounds ever, doesn't want to work. On loading the plane (which loads perfectly), the engine goes into its start-up sequence, fires and goes to idle, but then it sputters and dies and goes through the sequence again and again and again. It never gets to constant idle. There must be some sort of problem in the "sound.cfg" file as it relates to FS-2002 vs. FS-2000. I cannot figure it out. Does any one have a fix for this? Or does anyone have any ideas as to how to correct the problem? I have included the sound.cfg below, but not the *.wav files. Any ideas would be appreciated.
Thanks,
KCD
SOUND.CFG
[SOUND_ENGINE] number_of_engines=1 eng1_shutdown=shutdown eng1_combustion=ce0
[SHUTDOWN] filename=shuti viewpoint=1 link=shutdown.1
[SHUTDOWN.1] filename=shuto viewpoint=2
[ce0] filename=swsti type=0 viewpoint=1 rparams=1.0, 1.0, 350, 1.0 vparams=1.0, 280.0, 310.0, 0.0 min_volume=8300 link=ce1
[ce1] filename=cont1i type=0 viewpoint=1 rparams=1.4, 0.8, 1800.0,1.5 vparams=250.0, 0.0, 301.1,30.0, 350.0,42.0, 450.0,65.0, 1400.0, 0 min_volume=8300 link=ceidle
[ceidle] filename=propw3i viewpoint=1 type=0 rparams=300.0, 0.2, 1500.0, 1.6 vparams=300.0, 0.0, 301.0,70.0, 350.0, 75.0, 390.0,65.0, 2700.0, 0.0 min_volume=8300 link=ce2
[ce2] filename=propi type=0 viewpoint=1 rparams=200.0, 0.1, 1500.0, 1.3 vparams=300.0, 0.0, 400.0, 10, 1100.0, 10, 2300.0, 15 min_volume=8300 link=ce3
[ce3] filename=conh2i type=0 viewpoint=1 rparams=400.0, 0.1, 2500.0, 1.2 vparams=300.0, 0.0, 1300.0, 30.0, 1400.0, 40.0, 1800.0, 70.0 min_volume=8300 link=xstart
[xstart] filename=swsto type=0 viewpoint=2 rparams=5.0, 1.0, 350, 1.0 vparams=5.0, 99.5,310.0, 0.0 min_volume=8300 link=xce1
[xce1] filename=cont1o type=0 viewpoint=2 rparams=1.4, 0.7, 1800.0,1.5 vparams=250.0, 0.0, 301.1,60.0, 350.0,72.0, 450.0,95.0, 1400.0, 0 min_volume=8300 link=xceidle
[xceidle] filename=propw3o viewpoint=2 type=0 rparams=300.0, 0.3, 1500.0, 1.6 vparams=300.0, 0.0, 301.0,1.0, 350.0, 25.0, 390.0, 70.0, 1700.0, 0.0 min_volume=8300 link=xce2
[xce2] filename=propo type=0 viewpoint=2 rparams=200.0, 0.1, 1500.0, 1.3 vparams=400.0, 0.0, 900.0, 5, 1100.0, 10, 2300.0, 15 min_volume=8300 link=xce3
[xce3] filename=conh2o type=0 viewpoint=2 rparams=400.0, 0.1, 2500.0, 1.4 vparams=700.0, 0.0, 1300.0, 30.0, 1400.0, 40.0, 1800.0, 50.0 min_volume=8300
number_of_engines=1 eng1_shutdown=shutdown
[GEAR_DOWN] filename=cmgeardn
[gear_up] filename=cmgearup
[flapsh] filename=cmflaph initial_volume=9100
[flapsl] filename=cmflaplp initial_volume=9100
[flapst] filename=cmflapt initial_volume=9100
[stall_warning] filename=stall
[left_touchdown] filename=x panning=-10000 initial_volume=10000 maximum_volume=10000
[right_touchdown] filename=bump4 panning=10000 initial_volume=10000 maximum_volume=10000
[center_touchdown] filename=bump4 panning=0 initial_volume=10000 maximum_volume=10000
[wind_sound] filename=windy minimum_volume=5000 maximum_volume=8000 minimum_rate=0.5 maximum_rate=1.0 minimum_speed=30 maximum_speed=230.0
[OVERSPEED_WARNING_SOUND] filename=creak
[AP_DISENGAGE_SOUND] filename=caapdis
[CRASH_SOUND] filename=pcrash3 extra=cncrash1,cncrash2
[splash_SOUND] filename=psplash extra=cnsplas1,cnsplas2
[GROUND_ROLL] filename=cnroll2 flags=125218 minimum_volume=6000 maximum_volume=10000 minimum_speed=3 maximum_speed=55 minimum_rate=0.80 maximum_rate=1.60 link=GROUND_ROLL2
[GROUND_ROLL2] filename=cnroll flags=6612 link=GROUND_ROLL3
[GROUND_ROLL3] filename=cnroll3 flags=121300 link=GROUND_ROLL4
[GROUND_ROLL4] filename=cnroll4 flags=512 link=GROUND_ROLL5
[GROUND_ROLL5] filename=cnroll5 flags=1024 link=GROUND_ROLL6
[GROUND_ROLL6] filename=cnroll6 flags=131072
IP Logged
|