Search the archive:
YaBB - Yet another Bulletin Board
 
   
 
Page Index Toggle Pages: 1
Send Topic Print
Some eye opening numbers (Read 279 times)
Feb 20th, 2009 at 7:01pm

Craig.   Offline
Colonel
Birmingham

Gender: male
Posts: 18590
*****
 
From F1.com

Quote:
Think Formula One racing and the numbers that normally spring to mind are power outputs, top speeds and budgets. But numerically speaking there is far more than meets the eye to the average Grand Prix season. Did you know, for example, that brake discs can reach temperatures of up to 1000 degrees Celsius? Or that it takes around 40 hours to assemble a gearbox? BMW Sauber reveal some of the more surprising facts and figures from their 2008 season, as they continue to prepare for their '09 campaign...

- A driver sheds an average of two kilos in weight per Grand Prix.

- The average cockpit temperature is 50 degrees Celsius.

- A modern Formula One helmet is made of carbon and must not exceed 1,800 grams in weight, as stipulated in the regulations.

- Following the abolition of traction control, the F1.08 accelerated from 0 to 100 km/h in 2.75 seconds and from 0 to 200 km/h in 5.05 seconds. It took 0.75 seconds - equivalent to 50 metres - to brake from 300 to 200 km/h, which equates to 4.5g.

- In extreme braking manoeuvres, drivers are briefly subjected to 5g.

- Carbon brake discs and pads need a minimum operating temperature of 500–650 degrees Celsius. During braking they hit temperatures of over 1,000 degrees Celsius.

- Some parts of the protective monocoque consist of up to 60 layers of carbon fibre. A single carbon fibre is around six micrometres thick.

- Formula One tyres may heat up to 130 degrees Celsius. Beyond this level, there is an increased risk of blistering.

- After a race, it takes the team at least eight working hours to dismantle the car, test and replace individual components, and reassemble the car.

- It takes some 120 working hours to assemble the BMW engine, which consists of approximately 1,100 different parts and around 5,000 parts in total.

- Maximum piston acceleration is 10,000 times the speed of the earth’s rotation. Peak piston speed is 40 metres a second - or from zero to 100 km/h in 0.3 milliseconds. A force of almost three tonnes is exerted on the conrod. The average piston speed is around 25 metres per second.

- The exhaust reaches temperatures of up to 950 degrees Celsius.

- Over an average race distance of 300 kilometres, the BMW V8 engine undergoes around 6.5 million ignitions per Grand Prix.

- When the car comes into the pits during practice or qualifying, oil samples are taken for immediate spectrometer analysis. Traces of metal in the oil provide important indications as to the state of the engine.

- It takes around 40 working hours to assemble a new BMW gearbox.

- The G1.09 gearbox and associated hydraulics comprise around 1,500 parts in total, of which 480 are different components.

- About 20 gearboxes are built for test rig trials and for use in testing and races. They are overhauled several times.

- In a gearshift process, the existing gear is released and the new one already engaged in a matter of 0.004 seconds. It takes 50 times as long to bat an eyelid.

- High-precision bearings with ceramic rolling elements allow the shafts in the gearbox to operate with a minimum of oil.

- The oil temperature inside the gearbox can rise to 150 degrees Celsius.

- The car’s engineer can choose from more than 50 different gear ratios when adjusting the individual gears to a particular track.



Some pretty impressive stats.
The ones that stand out to me are the 0-100kph (62mph) is up from its quickest in 2005 of about 2.3 seconds.
The gear change time is astonishing. To give a comparison, The new Ferrari road cars have the fastest and most advanced gearboxes of any on the road right now, and they take a 60th of a second to change gear which is slightly faster than a blink of the eye. And I was reading an interview a while back with an engineer who said if it weren't for the rules stating there must be a clear drop in power, then a gearbox could shift at an almost instantanious speed, roughy 0.0001 of a second.
The other is the force of three tons of force on the conrods. These things are not exactly the biggest in the world to begin with. So the fact they last 70 odd laps of racing under that force is amazing.
 
IP Logged
 
Reply #1 - Feb 23rd, 2009 at 12:43pm
Sir Crashalot   Ex Member

 
Craig. wrote on Feb 20th, 2009 at 7:01pm:
Some pretty impressive stats.
The ones that stand out to me are the 0-100kph (62mph) is up from its quickest in 2005 of about 2.3 seconds.


Not that impressive to me:

0-60 mph: 2.92 sec.
0-100 mph: 5.41 sec.
Top-gear roll-on, 60-80 mph: 3.07 sec.
Topspeed about 300 kph

That's a Honda CBR1000RR Fireblade 2006.

Crash Wink (I know. It's not fair to compare a Formula1 car to a bike. But at least I can afford the bike)

 
IP Logged
 
Reply #2 - Feb 23rd, 2009 at 1:39pm

Craig.   Offline
Colonel
Birmingham

Gender: male
Posts: 18590
*****
 
ah but can your bike go from 290-0mph again in 3 seconds. Without you being thrown off? lol Cheesy
 
IP Logged
 
Reply #3 - Feb 23rd, 2009 at 2:19pm
Sir Crashalot   Ex Member

 
If a Fireblade (or other crotchrocket) could reach 290 mph it could.... if you hit a brick wall.

Like I said, it's unfair to compare bikes to cars. What I always wondered about is the fact that bikes can produce high horsepower numbers from a relative small engine (2008 Fireblade: 190 bhp, 1000cc four cilinder engine). Even my 20 year old Honda Hawk makes 50-55 bhp from a 650cc two cilinder engine. Now why do cars need massive engines to make some decent power?

Crash Wink
 
IP Logged
 
Reply #4 - Feb 23rd, 2009 at 2:29pm

Craig.   Offline
Colonel
Birmingham

Gender: male
Posts: 18590
*****
 
lol thats okay. Your stupid KPH system screwed my numbers up. meant 190mph. Grin Embarrassed Me so stupid. Point stands though. Tongue Grin
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print