Search the archive:
YaBB - Yet another Bulletin Board
 
   
 
Pages: 1 ... 4 5 6 
Send Topic Print
Another FSX New Proyect!! (Read 10078 times)
Reply #75 - Jul 13th, 2008 at 1:40pm

Dr.bob7   Offline
Colonel
Cessna 172SP a true aircraft
Castle Rock Colorado

Gender: male
Posts: 1404
*****
 
microlight wrote on Jul 13th, 2008 at 5:55am:
Guys,

Let's calm this down, there's a lot of hot air blowing around for nothing. If Alex wants to use the gauge in his VC (a compliment to George Carty after all), then why not just leave the location reference in the panel.cfg file, and put a note in the README that the gauge itself can be downloaded from the HJG downloads section? Anybody keen on using Alex' 707 (and who wouldn't?) shouldn't have an issue doing this - it's not as if it's hard work or anything.

That way, there can be no accusations of theft since the gauge will be obtained by the user from the 'right' source (which is here at SimV in any case).

I'm hoping that HJG is not trying to emulate other well-known model designer outfits who are very ... forthright with their views, shall we say, on their own websites.

Wink




if hot airs blowing i think your fans to blame  Grin
 
IP Logged
 
Reply #76 - Jul 16th, 2008 at 8:50am

microlight   Offline
Colonel
It's a bird...
Southern UK

Gender: male
Posts: 2236
*****
 
Harr-harr!!

That's a cracker!

Grin
 

...
BAe ATP for FS9 now available! www.enigmasim.com
IP Logged
 
Reply #77 - Jul 16th, 2008 at 12:03pm

tony_madge   Offline
1st Lieutenant
I love YaBB 1G - SP1!

Gender: male
Posts: 2
****
 
I am late replying to this thread but feel I should to make good the name of HJG. I want to say that we are not represented by Ben who had no authority to fire off comments in a way that has caused offence. I am sorry that this has portrayed our group in a very bad light, something which I have always tried to avoid since taking on HJG 2 years ago. Ok maybe if you could not get permission via e-mail then a message or PM in our HJG forum to me or another member of staff would have given you the answer you wanted, but that is no excuse for the disgraceful comments (without my knowledge or permission) that have appeared by someone from HJG.
We pride ourselves on being friendly and an easy group to get on with if we fail to do this I see no point in being a member.
Thanks for taking time out to read this post
best wishes all Tony Madge HJG Embarrassed
 
IP Logged
 
Reply #78 - Jul 16th, 2008 at 1:49pm

Alrot   Ex Member
I Love Simviation.

*
 
Mr. Tony Madge ,I know HJG is not represented by Ben, and Im sure as the rest of the people who saw this post, sure your site is well know as Prestigious in the internet .
Maybe Ben wasn't bad intentions ,maybe was to protect HJG Property ,and I respect that , I tried to contact George Carthy ,I didn't knew it was HJG Panel see this topic please,the first one

http://www.simviation.com/cgi-bin/yabb2/YaBB.pl?num=1210719054/30#30


, I was looking gauges (Is not merculiv fault either) when I was in the middle of the work I realize was Ben 's site, the same guy which we had a strong issue too at the beginning of this year ,and I didn't dear to Login in your forum for not having troubles with him ,so I try to contact G.C. Directly to his email   ,but the email I found was not good,didn't work Embarrassed ..

So I did what I consider the best ,to give the credit to G.C in the read me file and now also his name is in my website too

http://www.simviation.com/fsnd/Downloads.htm

Is a problem that will cause to HIMSELF(Ben) a lot of issues in his future life ,he's got to control his emotions and be carefull of what his type ,I read the way he espress about me in your forum ,he's very rude ,and also was with Pete Daly ..

This has nothing to do with Historic Jet Group ,I think this became more something personal between Ben and Me ,which started by accusing me for stealing a textures from vistaliners 727 AA paint he did  ,thing that I prove he was completely wrong ,the only thing I stole was the wonderful technique he uses to make the metallic effect  on a surface of a fuselage.. ,

Also he was very clear and claim that this hasn't to do with HJG ,that I took his paint and use in my B727 model, Latter he apologize to me,because obviously he was wrong..But I never get too convince about that apology and I knew this will be repeate it again as he claim in this thread Quote:
I can't believe this has happened once again! Disgusted once again
see why I wasn't too convience about that apology?.

Frankly I feel responsible for all this ,I should log in your forum and ask first ,

we are brother Hosted By Simviation and I 'd like to work together for the benefit of both Mr. Tony..

Anything you need or request ,Please PM me in this forum or in my website's forum http://alrot.proboards83.com/index.cgi

Thanks you Mr. Tony Madge...and sorry for my poor English

Alejandro Rojas Lucena



 
 
IP Logged
 
Reply #79 - Jul 17th, 2008 at 2:06am

Mark_C   Offline
Colonel
I love YaBB 1G - SP1!

Posts: 175
*****
 
There's an easy way to resolve the unfortunate part of what happened here .... Smiley

Firstly .... I am 1 of Tony's 3 management staff over at HJG.

Alejandro is correct .... it's unfortunate that what happened recently, well intentioned though it may have been, was misinterpreted and therefore very badly handled/represented .... I admit .... and albeit without the knowledge/consent of HJG management as Tony has indicated above !

For this I personally appologize to Alejandro on behalf of HJG .... and I also appologize to the SIMVIATION community for what happened here recently.

Alejandro .... por favor comunicar conmigo al foro del gruppo HJG.

Send me .... "AEROFOTO" .... a PM.

I do communicate with George CARTY.

If you will do this then I will see what I can do to try and get the co-operation/approval you were originally looking for .... OK. I know that George can sometimes be very difficilt to make contact with.

Por favor .... disculpeme para toda la molestia reciente.

Muchismmas gracias ! Wink

Mark CRANSTON aka "AEROFOTO"
Vice Manager HJG
« Last Edit: Jul 17th, 2008 at 6:37pm by Mark_C »  
IP Logged
 
Pages: 1 ... 4 5 6 
Send Topic Print