Simviation Forum - Help!! FS2002 will not except my aircraft model.

Apr 7^th, 2006 at 1:06am

Greg Ebnit EApilot Offline
Colonel
EA Aeronuatics The Home
of Chrome!
Michigan U.S.A.

Gender:
Posts: 483

I've almost completed my first sim aircraft and it wont show up in the sim. The aircraft is showing up in the selection window at the start but when I press ok to go to the create flight screen it shows me a microsoft error report. I have all my textures in the texture file although they are not consolidated. They are just single. But FS creates a full bgl that shows up in the sim with the textures the way I have them. I'm using a 747 air file although my aircraft is quite a bit larger. (I'll include a sreen shot.) Does anybody have any ideas what the problem is.I also tried mdl without animations since I have'nt added them yet. PLEASE HELP! I DO'NT WANT TWO MONTHS OF WORK GOING DOWN THE DRAIN. Thanks Greg.
IMAGE REMOVED AS IT WAS FOUR TIMES THE FORUM LIMIT AND REALLY SLOWING THINGS DOWN!

« Last Edit: Apr 7^th, 2006 at 10:43am by ozzy72 »

(AN ODE TO GMAX) OOOOOOOOOOOHHHHHHHHH GMAX! How I sometimes want to hug and kiss it. And other times want to smash, berate, and delete it. Gmax how I love and loathe thee. The crashes the errors the reinstalls. Gmax you are the whomb of my aircraft design. Oh Gmax my designing creating temptress. It must be love for you have taken my heartdrive. By Greg Ebnit

Back to top

IP Logged

Reply #1 - Apr 7^th, 2006 at 4:38am

Tom. Offline
Colonel
Image removed, do not
link!

Gender:
Posts: 874

If you post this in the Aircraf&3d design forums you will recive some help from the gurus Wink

Back to top

IP Logged

Reply #2 - Apr 7^th, 2006 at 3:45pm

Travis Offline
Colonel
Cannot find REALITY.SYS.
Universe halted.
Dripping Springs, TX

Gender:
Posts: 4515

Since you didn't give out a lot of actual info, I'm just gonna assume you're using Gmax.

First off, NEVER use *.bgl for aircraft--they won't work. BGL files are for scenery ONLY. What you want to mess with is strictly MDL files.

For doing FS2k2 conversions, I would absolutely recommend getting MDLCommander and Middleman. For descriptions of these two programs, what they do and where to get them, check this thread:

Gmax VC Troubles

Now, if this stuff doesn't fix it, I would suggest you post some pics of the thing IN GMAX as well as the error message you get from the sim.

Back to top

IP Logged

Reply #3 - Apr 7^th, 2006 at 5:42pm

Greg Ebnit EApilot Offline
Colonel
EA Aeronuatics The Home
of Chrome!
Michigan U.S.A.

Gender:
Posts: 483

Thanks for the replies. Yes I am using gmax and model commander. What I've been doing is as I texture the aircraft I am adding the parts and exporting the selected to a bgl file to make sure that they look exceptable in fs. (Then I export as a model file) As I said in the post the model is showing up in the select aircraft but when I click ok to go back to choose a flight or create a flight I get a microsoft error. The one that asks if you want to send a report to microsoft. Microsoft Flight Simulator Module has experienced a problem. I will also be sure to post in this forum in the future. Thanks. Here is the jpg that was originaly with the post only in a smaller version. OOPS! sorry about that.

(AN ODE TO GMAX) OOOOOOOOOOOHHHHHHHHH GMAX! How I sometimes want to hug and kiss it. And other times want to smash, berate, and delete it. Gmax how I love and loathe thee. The crashes the errors the reinstalls. Gmax you are the whomb of my aircraft design. Oh Gmax my designing creating temptress. It must be love for you have taken my heartdrive. By Greg Ebnit

Back to top

IP Logged

Reply #4 - Apr 7^th, 2006 at 10:06pm

Greg Ebnit EApilot Offline
Colonel
EA Aeronuatics The Home
of Chrome!
Michigan U.S.A.

Gender:
Posts: 483

Added information mdl has=
1.Is exported without animations
2.Textures are not consolidated and are not grouped in files.
3.Using 747 aircraft cfg and airfile.
4.Left front fuselage is parent with cg set at 1/4 of wings.
5.Model is gmax model.
6.Model shows up in fs select aircraft window.
7.Model has aliased sound and panel file 737sound/747 panel.
8.Part names are all FS excepted names.
9.Have not exported with cockpit parts.

Questions=
1.Do I set the exterior dummie as the CG?
2.How close does the aircraft cfg have to be to show up in the sim?
3.Is this aircraft to large?(jpg in original post)

Hope this helps anyone who might be able to give me some info. Thanks Greg.

(AN ODE TO GMAX) OOOOOOOOOOOHHHHHHHHH GMAX! How I sometimes want to hug and kiss it. And other times want to smash, berate, and delete it. Gmax how I love and loathe thee. The crashes the errors the reinstalls. Gmax you are the whomb of my aircraft design. Oh Gmax my designing creating temptress. It must be love for you have taken my heartdrive. By Greg Ebnit

Back to top

IP Logged

Reply #5 - Apr 7^th, 2006 at 10:12pm

Felix/FFDS Offline
Admin
FINALLY an official Granddad!
Orlando, FL

Gender:
Posts: 1000000627

For FS2002 you do NOT use exterior/interior dummies - I believe you need to use interior/excterior GROUPS.

Felix/FFDS

Back to top

IP Logged

Reply #6 - Apr 7^th, 2006 at 10:16pm

Greg Ebnit EApilot Offline
Colonel
EA Aeronuatics The Home
of Chrome!
Michigan U.S.A.

Gender:
Posts: 483

So ounce I get everything cloned it is safe to group them before export? Does'nt linking take care of that and would not grouping cause the model not to generate?

(AN ODE TO GMAX) OOOOOOOOOOOHHHHHHHHH GMAX! How I sometimes want to hug and kiss it. And other times want to smash, berate, and delete it. Gmax how I love and loathe thee. The crashes the errors the reinstalls. Gmax you are the whomb of my aircraft design. Oh Gmax my designing creating temptress. It must be love for you have taken my heartdrive. By Greg Ebnit

Back to top

IP Logged

	Search the archive: