Search the archive:
YaBB - Yet another Bulletin Board
 
   
 
Page Index Toggle Pages: 1
Send Topic Print
NO CD Rom (Read 326 times)
Jan 6th, 2005 at 11:51am

ulindel   Offline
Colonel
I love YaBB 1G - SP1!
Paris (France)

Gender: male
Posts: 46
*****
 
CPU 500mhz,  Win98, 256ram, 40gb. CDrom & CD R-Rw

Suddenly the master CDRom did not show on explorer.

On Boot-up both CDroms are regognised
CNTR Pnl System Hardware shows both cd roms.

Rebooted 4 -5 times, used install New Hardware, nouse.

Reinstalled Win98, but no change.

Installed a new CDRom, but still the same as above

Where do I go wrong?        thanks
 
IP Logged
 
Reply #1 - Jan 6th, 2005 at 1:49pm

Gunny04   Offline
Colonel
Who's Better than the
best when nobodys the
best?
Michigan

Gender: male
Posts: 2101
*****
 
I am thinking your Motherboards IDE cable thing is broken, that or a bad cable..... Dont go on my advice, just a guess! Cheers, Gunny
 

AMD athlon 3800 Venice Socket 939 64 bit at 2.4Ghz, 6100K8MA-RS Foxconn Motherboard, 1gb (2X512) OCZ Platinum PC3200 Ram, EVGA 8800GTS 640MB OC, 500 Watt NZXT psu, and Windows Vista Ultimate Total hard drive space 530gb
IP Logged
 
Reply #2 - Jan 6th, 2005 at 2:36pm

ozzy72   Offline
Global Moderator
Pretty scary huh?
Madsville

Gender: male
Posts: 37122
*****
 
Hmm, cable failure is very rare. Sounds like your CD-ROM has packed up! Can you find someone who will let you fit theirs to your machine to prove the fault?

Ozzy
 

...
There are two types of aeroplane, Spitfires and everything else that wishes it was a Spitfire!
IP Logged
 
Reply #3 - Jan 6th, 2005 at 3:57pm

Paz   Offline
Colonel
USA

Gender: male
Posts: 1922
*****
 
  My computer has one of those multi-card readers, and sometimes it disappears, I tried checking wires and cables and going into the device manager, rebooting and all that but nothing seemed to work, then one day it just showed back up working just fine.
 

&&Still no linked images allowed around here Paz! Naughty...&&
IP Logged
 
Reply #4 - Jan 6th, 2005 at 4:07pm

ulindel   Offline
Colonel
I love YaBB 1G - SP1!
Paris (France)

Gender: male
Posts: 46
*****
 
Ozzy,
I bought a new one to try and this does not show up, but it shows up on another PC.

 
IP Logged
 
Reply #5 - Jan 6th, 2005 at 4:21pm

Paz   Offline
Colonel
USA

Gender: male
Posts: 1922
*****
 
Quote:
Ozzy,
I bought a new one to try and this does not show up, but it shows up on another PC.



  Now you might want to take a look at that cable.
 

&&Still no linked images allowed around here Paz! Naughty...&&
IP Logged
 
Reply #6 - Jan 6th, 2005 at 4:23pm

Jared   Offline
Colonel
I'd rather be flying...
Uniontown, Ohio

Gender: male
Posts: 12621
*****
 
IF our friend here had windows XP there are many diagnostic things that can be used to find out where it went..Wink

Perhaps it's on vacation?

I believe everyone else has wrapped up what I would have guessed though..so no answer from me..
 
IP Logged
 
Reply #7 - Jan 6th, 2005 at 4:41pm

Gixer   Offline
Colonel
Lets go fly a kite!!

Posts: 1540
*****
 
You haven't by any chance used any programs like end-it-all at all have you?

I remember my friend tried using one of these programs before running his games and it made his CD-rom dissapear too.

I would go into your BIOS too and double check it is actually picking it up properly.
 

AMD64 3500+ @ 2200MHz 400FSB&&MSI K8N Neo 2 mobo nForce3 chipset&&1gig Corsair XMS PC3200 timings @ 10.2.2.2 &&XFX 6800 Ultra @ 450/1200&&80gig HDD&&Loadsa fans!!!
IP Logged
 
Reply #8 - Jan 6th, 2005 at 8:59pm

chomp_rock   Offline
Colonel
I must confess, I was
born at a very early
age.

Gender: male
Posts: 2718
*****
 
Could be your motherboard, I once had a similar issue and that is what it was.
 

AMD Athlon 64 3700+&&GeForce FX5200 256Mb&&1GB DDR400 DC&&Seagate 500Gb SATA-300 HDD&&Windows XP Professional X64 Edition
&&&&That's right, I'm now using an AMD! I decided to give them another try and they kicked the pants off of my P4 3.4!
IP Logged
 
Reply #9 - Jan 7th, 2005 at 11:50am

ulindel   Offline
Colonel
I love YaBB 1G - SP1!
Paris (France)

Gender: male
Posts: 46
*****
 
Thank you friends,
But do'nt forget that both CDRoms show in the start up Bios, and the Cntrl Pnl, System, Hardware.

Even so just for interest I tried a new cable.

I also bought a new CDRom. & works on another PC.

Yet only one, the slave shows in Win98 explorer.

I changed them over & it is the Master that does not show up in Win98 explr.

I found instructions on this "Cdrom missing in Windows" in troubleshoot of :- 
    http://www.mesich.com/cdrommissing.html
But unfortunately they do not relay to my Win98, must be for another version.

Any other help welcomed.
 
IP Logged
 
Reply #10 - Jan 7th, 2005 at 6:02pm

Jared   Offline
Colonel
I'd rather be flying...
Uniontown, Ohio

Gender: male
Posts: 12621
*****
 
Hae you ever used/installed/uninstalled any CD-burning software? IE especially roxio CD programs?

If so I found this site:
http://forum.aumha.org/viewtopic.php?t=9924
I know some of the people on it talk about xp, so I'm not sure how this would work/help..
 
IP Logged
 
Reply #11 - Jan 7th, 2005 at 6:33pm

Jared   Offline
Colonel
I'd rather be flying...
Uniontown, Ohio

Gender: male
Posts: 12621
*****
 
http://www.spcug.org/reviews/bl0305.htm

Check that out, seems he had the same problems and found a solution to it...Wink
 
IP Logged
 
Reply #12 - Jan 7th, 2005 at 7:55pm
Triple_7   Ex Member

 
i had the same problem on my old system.  Messed with it for days then gave up and bought a new one.  It wouldnt go eather.  Took it to a friend to look at and turns out from where i had it worked on a couple months before the tech managed to bend a couple of the pins on the mainboard.  all it took was some moving and it shorted out.  they had to be replaced but after that it worked fine.  Might start by having them checked Wink  especialy if you have unhooked and rehooked the cable
 
IP Logged
 
Reply #13 - Jan 8th, 2005 at 2:57pm

zeberdee   Offline
Colonel
I love YaBB 1G - SP1!
Sunny Bradford Yorks uk

Gender: male
Posts: 469
*****
 
Hi have you tried moving the jumpers from I assume master on one and slave on the other to "CS" ( cable select) on both this way the m/board sorts out slave / master. Might be worth a try, good luck Chris
 

If your not part of the answer    your part of the problem!   &&I've often wanted to drown my troubles, but I can't get my wife to go swimming. &&&&
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print