Search the archive:
 YaBB - Yet another Bulletin Board
 
   
 
  Simviation Forum › Old Flight Simulator Series › FS 2002 › Problem: aircraft sinks into the runway...
(Moderators: Mitch., Fly2e, ozzy72, beaky, Clipper, JBaymore, Bob70, BigTruck)
‹ Previous Topic | Next Topic ›
Pages: 1 2 
Send Topic Print
Problem: aircraft sinks into the runway... (Read 1169 times)
Mar 13th, 2003 at 10:49am

Mr. Bones   Offline
Colonel

Posts: 4304
 *****
 
hi,

i'm facing a big problem with my FS2002.
when i want to start a flight on the runway, my plane sinks into the runway and finally crashes. it doesn't happen all the time, let's say 70% of the time.
sometimes when it doesn't do that, it wont start rolling on full throttle...

i already reinstalled FS and used several planes, but the problem remains.

does anyone knows what the prob can be? maybe a corrupt plane, wrong addon, don't know

thanx

 
Raw power...the J-58.&&...&&&&My Anet collection.&&
Back to top 
IP Logged
 
Reply #1 - Mar 13th, 2003 at 10:55am

JohnP   Offline
Colonel
I love YaBB 1G - SP1!

Posts: 182
 *****
 
SmileyWhat plane is doing this? Is it one of the Fs2002 models, or is it an add-on that was downloaded? With this information it would be possible to help you.
 
Back to top 
IP Logged
 
Reply #2 - Mar 13th, 2003 at 12:10pm

Mr. Bones   Offline
Colonel

Posts: 4304
 *****
 
most of the time, they are add ons, not a specific one, they all do it...
 
Raw power...the J-58.&&...&&&&My Anet collection.&&
Back to top 
IP Logged
 
Reply #3 - Mar 13th, 2003 at 12:39pm

JohnP   Offline
Colonel
I love YaBB 1G - SP1!

Posts: 182
 *****
 
SmileyTry this as an experiment. Open Fs2002 and go to your settings, scenery section realism and check the box to ignore crashes. This is a general setting for the program, especially since you are having trouble with more than one plane. If it were one or two planes, then you could modify the aircraft.cfg file in the contact points section.
Let me know how you made out. If these suggestions don't work we will try something else.
 
Back to top 
IP Logged
 
Reply #4 - Mar 13th, 2003 at 2:03pm

Mr. Bones   Offline
Colonel

Posts: 4304
 *****
 
i tried the crash settings: still the same problems  Sad

about that contact points: can u tell me how to change them, i never tweaked the aircraft.cfg file before, except for adding repaints.

 
Raw power...the J-58.&&...&&&&My Anet collection.&&
Back to top 
IP Logged
 
Reply #5 - Mar 13th, 2003 at 2:34pm

JohnP   Offline
Colonel
I love YaBB 1G - SP1!

Posts: 182
 *****
 
SmileyThe first thing you should do is go to the Microsoft Fs2002 SDK website: Click the below link:
  http://zone.msn.com/flightsim/FS02DevDeskSDK00.asp
And download the aircraft container SDK. This has a detailed explanation on contact points and how they work,this will also give you some insight. You can go to the planes's folder(In question) and look for the aircraft.cfg file. You can open this with a file editor, such as notepad and scroll down to the contact points section and edit the lines accordingly. You may want to experiment a little to see how they work
I have seen quite a few posts on this forum addressing this issue, which might also help you.
Hopefully, this helps a little, post again if you have any more questions.
 
Back to top 
IP Logged
 
Reply #6 - Mar 14th, 2003 at 4:01am

packercolinl   Offline
Colonel
Any more laid back I'd
be asleep!

Posts: 1049
 *****
 
Just a thought before you get too carried away!
I'm on my 3rd RTW and occassionally come across
fields where if you land on the centre line you lose the
RH gear into the runway and slew off into the weeds
I've done the approach again landing as close to the
left runway edge as possible=nice landing!
Last one was in UK Wales EGFE  I think 3/29approach.
Norfolk Island east of Australia has the runway in the
middle of a lake,run off=splash. I put down to MS
programming cos I KNOW there was nothing wrong
with MY landing. I got peed off and went looking for the
problem.
 
White on White fly all night.&&&&Red on White you're alright.&&&&Red on Red you'll soon be dead.
Back to top 
IP Logged
 
Reply #7 - Mar 16th, 2003 at 5:04am

johnh   Offline
Colonel
I love YaBB 1G - SP1!

Posts: 10
 *****
 
A couple of thoughts come to mind:

1.Your default startup flight (which other options are based around) is a saved flight that has "gone wrong". Maybe it is based on a plane that did a wheels-up landing (they often sink into the runway) or maybe you have badly designed add-on scenery.

2.
 
Back to top 
IP Logged
 
Reply #8 - Mar 16th, 2003 at 5:06am

johnh   Offline
Colonel
I love YaBB 1G - SP1!

Posts: 10
 *****
 
Oops, must remember not to use the Tab key. As I was saying when I interrupted myself . . .

2. Some third-party aircraft will tip up when you move them around with "Yaw", try selecting a different aircraft, then going back to the original one.

J
 
Back to top 
IP Logged
 
Reply #9 - Mar 16th, 2003 at 3:21pm

Mr. Bones   Offline
Colonel

Posts: 4304
 *****
 
thanx for the tips John, but i'm afraid they don't help. i now removed everything from my pc (back uped good files i wanted to keep of course) and i'm gonna install it again...
 
Raw power...the J-58.&&...&&&&My Anet collection.&&
Back to top 
IP Logged
 
Reply #10 - Mar 16th, 2003 at 4:02pm

JohnP   Offline
Colonel
I love YaBB 1G - SP1!

Posts: 182
 *****
 
SmileyI am not sure which John You are referring to but would it be possible for you to post the link for one of your "sinking" planes. Maybe that way I can see what it wrong.
 
Back to top 
IP Logged
 
Reply #11 - Mar 16th, 2003 at 9:39pm

zcottovision   Offline
Colonel
YaBB 1G - SP1 loves me!
N. Ireland / EGAC

Gender: male
 Posts: 598
 *****
 
I recently had this problem. I downloaded the newest Airbus panel from avsim, and everytime I loaded a new flight, the plane would just sink into the ground and eventually crash. Replacing the panel with another cured it.
 
Back to top 
IP Logged
 
Reply #12 - Mar 17th, 2003 at 9:59am

Mr. Bones   Offline
Colonel

Posts: 4304
 *****
 
Quote:
SmileyI am not sure which John You are referring to but would it be possible for you to post the link for one of your "sinking" planes. Maybe that way I can see what it wrong.


like i said before, it happens with several planes, not just one. i now removed everything from my HD and gonna reinstall FS. if the problems are still there, i'll post a picture so u can see what's going on...
 
Raw power...the J-58.&&...&&&&My Anet collection.&&
Back to top 
IP Logged
 
Reply #13 - Mar 17th, 2003 at 12:42pm

A/SGT.Mav316   Offline
Colonel
You live, you learn, correct
and move on!
New York City

Gender: male
 Posts: 1331
 *****
 
Angry I get that happening to me all the time with the B-1b Lancer from I3d. That is why I no longer fly that baby until the updated version comes out.

Another thing is with addon planes they don't seem to recognize certain terrains in FS2k2. Like for instance if you take off from a mountain and fly over an open terrain when you fly back to the landing strip to land, the plane will sometimes fly straight through the mountain like the runway and mountain isn't there! Shocked
 
Its only in your mind, strong mind, strong soul and nobody can take that from you!
Back to top 
IP Logged
 
Reply #14 - Mar 19th, 2003 at 1:33am
IVANOW   Ex Member

 
Go to Simviation Home PAGE. Click on Links on left side. When page opens look for [Grumpys, The Lair] He has a write up on this and the settings to fix this problem.
 
Back to top 
IP Logged
 
Pages: 1 2 
Send Topic Print
‹ Previous Topic | Next Topic ›
  « Home ‹ Board Top of this page

Simviation Forum » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge