Simviation Forum - Sim aircraft from three-view artwork?

Feb 17^th, 2003 at 11:05pm

John Backlund Guest

Although I am addicted to my Microsoft flight sim 2002, I am not a computer guy, I am a paper/pencil illustrator and designer. Most of my time is being spent doing watercolor illustrations for my childrens book, but I am also an incurable aviation freak and would like to see some of my aircraft designs (both conventional and fantasy) flying about the virtual sim skies at some point. Can computer aircraft designers work from accurate three-view drawings? Do the software designers often collaborate with an illustrator/designer. I am unfamiliar with the process of sim airplane design. Several examples of my aircraft can be viewed at this photo-host site http://community.webshots.com/user/Bigfun1300

The "Neptoon" conceptual monoplane and the retro, tractor gyroplane are two example of my rough pencil design. Also, for a bit of fantasy, there is the "Fishblimp" from my book. Any interest out there in this kind of thing?

Back to top

IP Logged

Reply #1 - Feb 18^th, 2003 at 5:57am

guimero Offline
Colonel
plane finished!!!

Posts: 52

Nice drawings you have.

It is completely possible to make 3D models of your designs and incorporate them into the fS2002. The only thing is whether you want to simulate their flight characteristics. For that You need quite a lot of work and get aeronautical knowledge in order to get the thing flying as it will fly in real life.

But if you are just interested in seeing your concepts fly the only thing you have to do is create the 3D model and link the a/c dynamics of an existing plane with the new model.

Back to top

IP Logged

Reply #2 - Feb 18^th, 2003 at 6:37am

Felix/FFDS Offline
Admin
FINALLY an official Granddad!
Orlando, FL

Gender:
Posts: 1000000627

Where's the Neptoon top view? and how does the pilot see out of the plane .. (not insurmountable)

I can go for "Buffalo Wings" ..

Felix/FFDS

Back to top

IP Logged

Reply #3 - Feb 18^th, 2003 at 10:14am

javier Offline
Colonel
I love YaBB 1G - SP1!

Posts: 10

I will happly go on the wait line for a 3 view of your "duck on a biplane" or the "buffalo wings"after that will make the rest........... Grin

Let us know when you do the 3 view .

Back to top

IP Logged

Reply #4 - Feb 18^th, 2003 at 6:26pm

Felix/FFDS Offline
Admin
FINALLY an official Granddad!
Orlando, FL

Gender:
Posts: 1000000627

Half-assed attempt - wings modelled after a Travel-Air Mystery Ship, since (harumph) no decent top view is available....

Felix/FFDS

Back to top

IP Logged

Reply #5 - Feb 19^th, 2003 at 12:03am

SilverFox441 Ex Member

I'll take a shot at the gyroplane if Felix is doing the Neptoon.

Give us some 3-views.

Very cool drawings.

Felix, I had thought the front section was all glazed like the He-115's. Maybe a mid-engine with a glazed nose?

Back to top

IP Logged

Reply #6 - Feb 19^th, 2003 at 1:30am

Bigfun Offline
Colonel
I love YaBB 1G - SP1!

Posts: 11

Thanks to all for looking at the planes. Felix: I'm amazed at the 3D view of the "Neptoon" already. The design was originally to be an RC aircraft of about eighty inch span (and may still be, if i can get enough ambition to build it) so, being entirely fictional, and being a fan of "Future Retro", I didn't want to mess up the lines with silly things like being able to see forward, let's assume that it is piloted "NX211wise" utilizing a periscope. I envision it as a fairly "hot" aircraft due to what may be a high wing loading and overall slippery design. I will try to complete the views of this and other aircraft, I really had no idea if there was any interest in these kinds of things among the Sim designers/pilots. Silverfox: I have a long-term interest in gyroplanes and enjoy designing them. Again, I tend towards a classic, "retro" look for them and favor the tractor configuration over the pusher types because I can utilize a gracefull airplane-like fuselage, which among other pleasing visual elements, lend themselves to very attractive color schemes. Very encouraging feedback, might be fun for me to pursue this further. Thanks, I'll be around. John Backlund (Bigfun).

Back to top

IP Logged

Reply #7 - Feb 19^th, 2003 at 1:43am

Bigfun Offline
Colonel
I love YaBB 1G - SP1!

Posts: 11

"Buffalo Wings" is one in a series of three "Vehicles". Originally there is the "1947 Bufflomobile" and the "Buffalo wings" jet which is a fictional aircraft used by the South Dakota National Guard in the 50's. It is probably a second generation sub-sonic craft similar in performance to the F-86, although it isn't (obviously)anywhere near as pleasing to the eye as the North American jet. The number seven on the plane is a reference to the 7th cavalry and an arrow is visible sticking out of the lower fuselage. The third subject was the "Buffalopter" which exists only as a casual pencil design, but it is every bit as nuts as the jet.

Back to top

IP Logged

Reply #8 - Feb 19^th, 2003 at 7:16am

Felix/FFDS Offline
Admin
FINALLY an official Granddad!
Orlando, FL

Gender:
Posts: 1000000627

John - you underestimate the weird sense of humor that most designers really have ... especially those of us with a soft spot for the historical (bordering on the histerical) - retro look ...

The nice thing about FS is that it's like a piece of paper- it'll hold anything you put on it...

Quote:

I really had no idea if there was any interest in these kinds of things among the Sim designers/pilots.

Felix/FFDS

Back to top

IP Logged

Reply #9 - Feb 19^th, 2003 at 10:17pm

John Backlund Guest

Oh, I know there's some loose cannons out there. Even I have been flying the Harry Potter broom around a bit.

Back to top

IP Logged

	Search the archive: