Simviation Forum - Key Assigment

	Search the archive:

Simviation Main Site | Site Search | Upload Images

Simviation Forum › Current Flight Simulator Series › FS 2004 - A Century of Flight › Key Assigment

(Moderators: Mitch., Fly2e, ozzy72, beaky, Clipper, JBaymore, Bob70, BigTruck)

‹ Previous Topic | Next Topic ›

Pages: 1

Key Assigment (Read 1947 times)

Feb 21^st, 2004 at 5:37pm

foo_fighter Offline
Colonel
The Heavier Than Air 1st
Flight Centennial
Sao Jose dos Campos, Sao Paulo

Gender:
Posts: 1610

Hi Guys!

See, I got this model, a Grumman C-1 Trader which is quite good, lil old model, but that's ok, my problem is that the folding wings are assigned to fold hittin' Concorde Nose Up and Down.
what I want to do is change this to the common shft+t ot shft+x (in my case), is it possible?
I'm using a gauge and a simicon in order to create a shortcut in the panel, but seens to be useless since the folding wings won't be assigned to it, how do I proceed?

thanks in advance

cya!

JUST ONE WORD: FREEWARE! The more free it is, the more shall I fly!&&

Nice Flights 4 Every1

IP Logged

Reply #1 - Feb 22^nd, 2004 at 8:29am

dave3cu Offline
Colonel
Procrastinate now, don't
put it off.
3CU, Northern Wisconsin, USA

Gender:
Posts: 3077

Hi Foo,

Looking at key assignments (all still default I believe) I see that shift+t is already assigned to 'wingfold up/down' (toggle) so unless you have other a/c that use it for wingfold you can reassign it to one of the 'nose' commands. Shift+x is unassigned so could be assigned to the other 'nose' command.

As for the SimIcon, I dont have a clue at this point.

Afterthought(Cob webs clearing): I dont fly the concorde but I'm guessing there's a gauge for the nose you could put in your panel. (Or maybe that's already there and thats what your tryin to remove/change? ) Then using a SimIcon, call a new window with the gauge in it. (If you need help with this option just holler)

Cheers,
Dave

At that time [1909] the chief engineer was almost always the chief test pilot as well. That had the fortunate result of eliminating poor engineering early in aviation. Igor Sikorsky

I intend to live forever....so far, so good. Steven Wright

You know....you can just rip up a to-do list.

IP Logged

Reply #2 - Feb 22^nd, 2004 at 10:27am

foo_fighter Offline
Colonel
The Heavier Than Air 1st
Flight Centennial
Sao Jose dos Campos, Sao Paulo

Gender:
Posts: 1610

Hi Dave3Cu,

AS a matter of facts I've changed all my assignments, LOL, I managed to modify 'em in order to make easier for me while flyin or creatin new panel's window but your idea of the concorde seens to be the way!
thanks pal!
cya! Wink

JUST ONE WORD: FREEWARE! The more free it is, the more shall I fly!&&

Nice Flights 4 Every1

IP Logged

Reply #3 - Feb 23^rd, 2004 at 11:07am

Sterk Offline
Colonel

Posts: 316

It may be impossible,cause it depends on part names that were assigned in sourse model file,but-try,may be it's not your case...

&&&&

IP Logged

Reply #4 - Feb 23^rd, 2004 at 11:14am

Hagar Offline
Colonel
My Spitfire Girl
Costa Geriatrica

Posts: 33159

You can't change the actual key command defined in a particular model. What you can do is reassign the key commands from FS9/Settings. In this case reassigning the Concorde Nose commands to the wing fold keys would mess up the default key commands for your other models. It would be easier to assign a joystick button to the Concorde Nose commands.

Founder & Sole Member - Grumpy's Over the Hill Club for Veteran Virtual Aviators
Member of the Fox Four Group

Need help? Try Grumpy's Lair

My photo gallery

IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page