Simviation Forum - New Fs2004 Beechcraft Starship 2000

Aug 29^th, 2012 at 3:23pm

stanova Offline
Colonel

Gender:
Posts: 12

Hello! This is my first upload so hopefully all goes well. I made this with my brothers and my dad a few years ago.All the gauges were custom programmed, backlit VC, full interior.Posting some more screenshots in a bit.

Back to top

IP Logged

Reply #1 - Aug 29^th, 2012 at 3:29pm

stanova Offline
Colonel

Gender:
Posts: 12

Just uploaded this aircraft , so it may be awhile before it shows up in simviation downloads

Back to top

IP Logged

Reply #2 - Aug 29^th, 2012 at 5:13pm

wahubna Offline
Colonel
WMU Bronco
Michigan

Gender:
Posts: 1064

Oh...my..gosh....give me a moment here, *sniffle*, words cannot describe my happiness!

Thank you so much!

Tailwinds,
Adam

‎"At that time [1909] the chief engineer was almost always the chief test pilot as well. That had the fortunate result of eliminating poor engineering early in aviation."- Igor Sikorsky

Back to top

IP Logged

Reply #3 - Sep 16^th, 2012 at 2:35pm

stanova Offline
Colonel

Gender:
Posts: 12

sorry, it seems to be taking awhile for this plane to get uploaded to the simviation downloads. how long does it usually take before a freeware file is available? never uploaded a plane before...lol

Back to top

IP Logged

Reply #4 - Sep 16^th, 2012 at 3:34pm

pete Offline
Admin
'That would be a network
issue'
Cloud Cuckoo Land

Posts: 8500

stanova wrote on Sep 16^th, 2012 at 2:35pm:

sorry, it seems to be taking awhile for this plane to get uploaded to the simviation downloads. how long does it usually take before a freeware file is available? never uploaded a plane before...lol

Hi

Files will nearly always be approved within 24 hrs - often within the hour.

This file contained no credits - files without credits are not usually genuine files.

Also this file was uploaded while I was taken away from my usual duties due to something beyond my control. Meanwhile it fell down the list ...

It looks like a great file so some details should be included (If you provide credits I can add them) . Cool

Meanwhile I'll approve it now ....
Thanks

Edit: - Just checked it out - nice aircraft!! Cool

Think Global. It's the world we live in.

Back to top

IP Logged

Reply #5 - Sep 17^th, 2012 at 8:47am

BlackAce Offline
Colonel
If it's not Boeing, I'm
not going.
KBOI; Boise, Idaho

Gender:
Posts: 1203

Can it be used in FSX?????

Lenovo Y570: Intel Core i7-2670QM Processor( 2.2GHz 1333MHz 6MB) Nvidia 555M graphics, 8GB Memory/RAM 1TB of space

Back to top

IP Logged

Reply #6 - Sep 17^th, 2012 at 4:40pm

Boikat Offline
Colonel
Hello!
NW Loueezianner

Gender:
Posts: 2978

BlackAce wrote on Sep 17^th, 2012 at 8:47am:

Can it be used in FSX?????

Yes, except for the props. But that's not unusual for an addon designed for FS9

All-in-all, a very nice addon!

"I reject your reality, and substitute my own" Adam Savage, Mythbusters

Back to top

IP Logged

Reply #7 - Sep 19^th, 2012 at 5:51pm

gtirob01 Offline
Colonel
FSXer
Ft. Walton Beach, FL

Gender:
Posts: 3522

I saw a posting about this over a SOH.... the guys there love it, and several of them are looking to make it more FSX compatible... they just wanted permissions to do so, but as Pete said, there are no credits or contact information.

Looks great and very eager to fly it! Once of the nicest looking planes ever designed!

My specs... A hard drive, motherboard, graphics card, some memory, a keyboard, mouse, and monitor - in other words, nothing special.&&&&My Posky 777 VC settings - http://www.simviation.com/cgi-bin/yabb2/YaBB.pl?num=1218341439&&Posky 777 and FSX jetways - http://www.simviation.com/cgi-bin/yabb2/YaBB.pl?num=1228448408

Back to top

IP Logged

Reply #8 - Sep 19^th, 2012 at 10:54pm

wahubna Offline
Colonel
WMU Bronco
Michigan

Gender:
Posts: 1064

Just to let you folks know, yes it is amazing. Very well done pack, although it will take some time to get used to how this bad boy slows down...hint: it does not! Grin

It took me 3 times coasting around the pattern to bring the speed down after a max speed trial at mid-low weight.
Feels good though and the cockpit is wonderfully well done. I am enjoying the sound of it too, reminds me of the scale test bed Starship when I saw it fly at Oshkosh (2011).

‎"At that time [1909] the chief engineer was almost always the chief test pilot as well. That had the fortunate result of eliminating poor engineering early in aviation."- Igor Sikorsky

Back to top

IP Logged

Reply #9 - Sep 20^th, 2012 at 2:06am

ejwells Offline
Lieutenant Colonel
I Love Simviation.

Posts: 5

Has anyone attempted to do any repaints for this airplane? I've been doing repaints for a long time, but I've never seen one textured the way this is. Unless I'm missing something here, there is no way to do a proper livery as there are no textures for the wings, fuselage, tail, stabs, etc. There is a texture named fuselage_T, but it only consists of small sections of the exterior (some panels). The bulk of the fuselage gets its color from a small square of color and the stripes must have been done on the model itself.

The only other explanation is that there are textures missing, but since there's no way to contact the developer, we'll probably never know for sure. Too bad really because it has gotten a very good reception on my home forum (SOH). The lack of any useable textures is unfortunate.

Back to top

IP Logged

Reply #10 - Sep 20^th, 2012 at 4:13am

Fozzer Offline
Colonel
An elderly FS 2004 addict!
Hereford. England. EGBS.

Posts: 24861

wahubna wrote on Sep 19^th, 2012 at 10:54pm:

Just to let you folks know, yes it is amazing. Very well done pack, although it will take some time to get used to how this bad boy slows down...hint: it does not! Grin

It took me 3 times coasting around the pattern to bring the speed down after a max speed trial at mid-low weight.
Feels good though and the cockpit is wonderfully well done. I am enjoying the sound of it too, reminds me of the scale test bed Starship when I saw it fly at Oshkosh (2011).

I noticed that as soon as I tried landing at KSFO...without running out of runway!
(The Air Brakes didn't seem to reduce the speed quickly enough!).
I big sigh of relief....followed quickly by loading my more familiar Beech Baron instead... Grin

...!

Its an excellent model, but takes a lot of getting used to, overall!... Wink

...!

Paul...Star-struck... Cool

...!

Dell Dimension 5000 BTX Tower. Win7 Home Edition, 32 Bit. Intel Pentium 4, dual 2.8 GHz. 2.5GB RAM, nVidia GF 9500GT 1GB. SATA 500GB + 80GB. Philips 17" LCD Monitor. Micronet ADSL Modem only. Saitek Cyborg Evo Force. FS 2004 + FSX. Briggs and Stratton Petrol Lawn Mower...Motor Bikes. Gas Cooker... and lots of musical instruments!.... ...!
Yamaha MO6,MM6,DX7,DX11,DX21,DX100,MK100,EMT10,PSR400,PSS780,Roland GW-8L v2,TR505,Casio MT-205,Korg CX3v2 dual manual,+ Leslie 760,M-Audio Prokeys88,KeyRig,Cubase,Keyfax4,Guitars,Orchestral,Baroque,Renaissance,Medieval Instruments.

Back to top

IP Logged

Reply #11 - Sep 22^nd, 2012 at 11:55am

ejwells Offline
Lieutenant Colonel
I Love Simviation.

Posts: 5

Too bad Matt has not found it necessary to fwd his contact information to the Admins as requested. The initial excitement over his model at SOH has dropped to zero after I discovered the lack of repaintable textures, leaving no way to do additional liveries. This may have been an oversight on his part or it was due to a lack of knowledge concerning proper texturing of a model or he simply did not want his model tampered with....not sure why.

Also, there was interest in modifying the airfile to a more "Starship like" setup, but permission to do so was being requested, and again, with no way to contact him, that project has also be scrapped.

So it appears that what started out as a very anticipated and promising model has fizzled to indifference and that's a shame because even with the problems it has it's the only Starship with a VC and with Matt's help it could have become a classic.

Anyway, it's too bad he has left with no forwarding address. Matt if you see fit to come back online. . .get some information together based on the concerns I've raised and reply please.

Back to top

IP Logged

Reply #12 - Sep 22^nd, 2012 at 1:37pm

stanova Offline
Colonel

Gender:
Posts: 12

hey, sorry for not checking in.Ive been busy the past week. My email is chodekus@gmail.com. I am sorry for not providing the proper credits. I will get on this. I would like to tell the people over at SOH that I will get back to them ASAP. I don't have an account over there, but I will get to contacting people soon.

I checked the post over at SOH, and StuartCox posted that the AIR is from a Canadair CL-2-15. I believe this is correct. My dad Gerry Labelle worked on the flight characteristics. I have no idea how to modify CFGs and flight dynamics, so that was his corner.

Now the texture...yes, majority of the textures are placed in small coloured blocks. Our texture mapping skills at this time were "amateur" at best. Sorry about this.

Model by Tom Stanova, Panel and Gauges by Leo Stanova, Gauge and Textures by Gerald Labelle, Animations and VC by Matt Stanova

« Last Edit: Sep 22^nd, 2012 at 3:40pm by stanova »

Back to top

IP Logged

Reply #13 - Sep 22^nd, 2012 at 1:54pm

ejwells Offline
Lieutenant Colonel
I Love Simviation.

Posts: 5

Great to hear back from you. The biggest concern is the lack of texturing. So my question to you would be...are you still designing aircraft/have your texturing skills increased to the point that you would consider re-texturing the Starship to make it user-friendly?

There is no payware developer interested in producing a Starship at this time. Even if they were to consider doing one, it would be a year or longer before it would ever be close to release. Your Starship is the best that both FS9 and FSX has right now, largely due to the excellent work that was done with the VC. Is there any chance that you would consider revisiting that airplane to make some changes?

Thanks again for the Starship and coming back online to respond.

Back to top

IP Logged

Reply #14 - Sep 22^nd, 2012 at 1:59pm

stanova Offline
Colonel

Gender:
Posts: 12

ejwells, if you have anyone interested in gaining permission to mod, fix, and polish this plane, please have them contact me at chodekus@gmail.com.
We built this over 4 years ago, and after unpacking it, some files went corrupt and missing ( the AIR went missing so all the aircraft flight dynamics had to be reconstructed ), the last month we have been patching holes. But there is some problems. Fx files missing, and a couple gauges have problems in FSX. Maybe the xml gauge needs to be reprogrammed to work for fsx?

Back to top

IP Logged

	Search the archive: