Simviation Forum - FS9 Tool Tip Inf for M20 HSI

	Search the archive:

Simviation Main Site | Site Search | Upload Images

Simviation Forum › Design Forums › Scenery & Panel Design › FS9 Tool Tip Inf for M20 HSI

(Moderators: Mitch., Fly2e, ozzy72, beaky, Clipper, JBaymore, Bob70, BigTruck)

‹ Previous Topic | Next Topic ›

Pages: 1

FS9 Tool Tip Inf for M20 HSI (Read 274 times)

Sep 3^rd, 2011 at 11:20am

WPadgett Offline
Colonel

Gender:
Posts: 27

The default FS9 Mooney M20 & Beechcraft B58 use, what appears to me to be, the same HSI. When you activate the tool tip over the HSI in the B58 it gives the usual instrument description plus heading and course. In the Mooney all I get is the instrument description. Is there a way to get the Mooney tool tip to display heading and course?

Where is the OAT in the B58?

TIA

CP - ASMEL, instruments

IP Logged

Reply #1 - Sep 3^rd, 2011 at 7:31pm

JoBee Offline
Colonel
Better to give than receive.

Posts: 582

They are not the same HSIs.

If you want the Baron HSI in the Mooney you can have it with a simple panel.cfg edit.

First backup the panel.cfg.

In the panel.cfg find...

gaugenn=Mooney_Bravo!HSI, ...

...and replace it with...

gaugenn=Beech_Baron!Horizontal Situation Indicator,...

Make sure the numbers all stay the same.

You will do this twice in the panel.cfg. Once for the 2D and once for the VC.

Also, there are 2 panel folders. Change both if you use both th regular panel and the IFR panel.

The OAT in the Baron is on the pilot's side panel in the VC and is not a working gauge.

I have a change for that somewhere, if I can find it I will post it here.

cheers,
Joe

Don't argue with idiots, they drag you down to their level and beat you with experience.

IP Logged

Reply #2 - Sep 3^rd, 2011 at 10:07pm

WPadgett Offline
Colonel

Gender:
Posts: 27

Thanks for that info!

CP - ASMEL, instruments

IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page