Search the archive:
Simviation Main Site
|
Site Search
|
Upload Images
Simviation Forum
›
Design Forums
›
Scenery & Panel Design
› I'll make scenery for YOU!
(Moderators: Mitch., Fly2e, ozzy72, beaky, Clipper, JBaymore, Bob70, BigTruck)
‹
Previous Topic
|
Next Topic
›
Pages:
1
2
3
I'll make scenery for YOU! (Read 3866 times)
Reply #15 -
Aug 19
th
, 2011 at 9:48am
FlierForLife
Offline
Colonel
Florida
Gender:
Posts: 36
Club508 wrote
on Aug 18
th
, 2011 at 2:23pm:
It seems you're already kind of overloaded, but when you're done with all those would you please make an airport kind of like this for me for FS9? If you can't do FS9 I'll take FSX.
This is not a real airport, it's just one I thought up.
Here's what I'm hoping for it to have:
A 1,500 ft long and 100 ft wide water runway surrounded by land so that only the runway is water.
A 2,000 ft long and 100 ft wide runway. (Asphalt or concrete)
A 10,000 ft long and 200 ft wide runway.
(Asphalt or concrete)
A 5,000 foot and 150 ft wide all uphill runway.
(Asphalt or concrete)(close to 45* please for the hill)
And a 6,000 ft long and 200 ft wide runway that for the first 3,000 ft is flat and level and for the second 3,000 ft curves upward. (to about 25* for the upward part please.)
If possible please make all the runways have atleast one parking spot and make all the runways surrounded by autogen trees.
I don't care about ATC, AI or where the airport is.
You can pick th name of the airport if you want.
Thanks!
I'm sorry, but that's is just a little too much for me. It is extremely complex to make sloping runways, and I don't know how to make water-class specific sizes yet. But, you could got to FSDevelopers forum, where the pros hang out and ask them. I'm sure they would be happy to help.
Gateway SX2311-03 (look it up)
Back to top
IP Logged
Reply #16 -
Aug 19
th
, 2011 at 10:18am
Club508
Offline
Colonel
I like repainting aircraft!
Planet Earth
Gender:
Posts: 1528
Oh well.
Can you please atleast make that water runway and add a both a water and land taxi and parking area?
Back to top
IP Logged
Reply #17 -
Aug 19
th
, 2011 at 10:18am
Club508
Offline
Colonel
I like repainting aircraft!
Planet Earth
Gender:
Posts: 1528
Oh well. Thanks anyway. I'll try them.
Back to top
IP Logged
Reply #18 -
Aug 19
th
, 2011 at 1:43pm
FlierForLife
Offline
Colonel
Florida
Gender:
Posts: 36
garryrussell wrote
on Aug 18
th
, 2011 at 7:00pm:
I don't think you can have runways going uphill in FS.9.they are always flat.
Yeah, I think so too. I think it has to do with the location of the hardened surface or something.
Gateway SX2311-03 (look it up)
Back to top
IP Logged
Reply #19 -
Aug 23
rd
, 2011 at 11:32pm
sagittarius
Offline
Colonel
Hello!
Denver, CO
Gender:
Posts: 15
I'm surprised there is no photo scenery in FSX for Denver, CO. It would be nice to do a photo-DIA (KDEN) and the Rockies. I personaly fly out of Centennial airport (KAPA), class D airspace, Denver metro area...been trying to find a Colorado scenery for a while now....unsuccessful
HELP pleaaaaase!!!!
Back to top
IP Logged
Reply #20 -
Aug 24
th
, 2011 at 12:12am
pegger
Offline
Colonel
Posts: 21
sagittarius wrote
on Aug 23
rd
, 2011 at 11:32pm:
I'm surprised there is no photo scenery in FSX for Denver, CO. It would be nice to do a photo-DIA (KDEN) and the Rockies. I personaly fly out of Centennial airport (KAPA), class D airspace, Denver metro area...been trying to find a Colorado scenery for a while now....unsuccessful
HELP pleaaaaase!!!!
Really? How about this one?
http://simviation.com/1/download-file?file=GNB_SouthEast2009_LR.zip&fileId=4615
I DL'sd it and it looks ok. It gets lost at night but what ever...whoever flies at night to look at scenery?
Back to top
IP Logged
Reply #21 -
Aug 24
th
, 2011 at 9:08am
Club508
Offline
Colonel
I like repainting aircraft!
Planet Earth
Gender:
Posts: 1528
pegger wrote
on Aug 24
th
, 2011 at 12:12am:
sagittarius wrote
on Aug 23
rd
, 2011 at 11:32pm:
I'm surprised there is no photo scenery in FSX for Denver, CO. It would be nice to do a photo-DIA (KDEN) and the Rockies. I personaly fly out of Centennial airport (KAPA), class D airspace, Denver metro area...been trying to find a Colorado scenery for a while now....unsuccessful
HELP pleaaaaase!!!!
I DL'sd it and it looks ok. It gets lost at night but what ever...whoever flies at night to look at scenery?
I do. You can get some VERY good shots then.
If you need examples, here's some leftovers I took for this month's screenshot contest.
http://www.simviation.com/phpupload/uploads/1313042649.jpg
http://www.simviation.com/phpupload/uploads/1313066102.jpg
http://www.simviation.com/phpupload/uploads/1313029060.jpg
http://www.simviation.com/phpupload/uploads/1313006346.jpg
Back to top
IP Logged
Reply #22 -
Aug 25
th
, 2011 at 9:55pm
FlierForLife
Offline
Colonel
Florida
Gender:
Posts: 36
fcerven wrote
on Aug 17
th
, 2011 at 1:18am:
I agree, Wow what a great offer. One airport that has been ignored has been the home of the 767, 777, 747-8 and the 787. That is KPAE (Paine filed in Snohomish County, Washington). I have Ultimate Terrain X but even they just barely touched it. It's a big project but well worth it when you include the Boing Plant just north of the field.
If you do do it, I suggest you put it here for everyone because there have been many requests for it.
Fred.
I'd love to do that scenery, but I have a problem. If you have Ultimate Terrain X, even if it barely touched the field,
that makes your Paine airport different than mine, since I don't have any addons for it. Unless you can somehow uninstall or remove UTX from just Paine field, I can't make a correct addon.
Gateway SX2311-03 (look it up)
Back to top
IP Logged
Reply #23 -
Aug 25
th
, 2011 at 10:00pm
FlierForLife
Offline
Colonel
Florida
Gender:
Posts: 36
jetprop wrote
on Aug 17
th
, 2011 at 5:58am:
eick
cork airport.
it is probably one of the worst areas in the game,bridges in the wrong location,landmarks are not there,no cruise ships at cobh,the airport itself is decent but the area around it is horrible,it is so bad i would be happy with the following improvements: no gap of water where the tunnel is,the esb(an energy plant),the ONLY oilrefinery in ireland and the town/city of cobh with a cruiseship.
i know it is a lot of work but i have been looking for cork harbour scenery for ages and the only one i have found is just cork airport and its payware.
I can do the airport, but I don't know about the scenery around the airport. It is a massive undertaking to do a medium sized airport with quality, not to mention an entire region. It involves making exclusion and land class polygons, adding hundreds of things by hand, and doing meticulous and repetitive work.
Gateway SX2311-03 (look it up)
Back to top
IP Logged
Reply #24 -
Aug 29
th
, 2011 at 4:19am
jetprop
Offline
Colonel
A freeware addict!
a chair infront of a monitor.
Posts: 1523
it does not have to be realy high quality.
just a fix in the tunnel and maybe the church etc. the landmarks,and i have seen most ready-made in the sim.
Back to top
IP Logged
Reply #25 -
Oct 6
th
, 2011 at 6:39pm
jimm57
Offline
Colonel
KRDU
Gender:
Posts: 163
Just saw this post. If you feel adventurous, could you make KRDU, Raleigh Durham NC? Its an international airport, and is my default. Many people fly through RDU because its in the South East. Theres a flight school there also.
http://www.airnav.com/airport/KRDU
http://en.wikipedia.org/wiki/Raleigh-Durham_International_Airport
Please post it to SimV! Thank you!
Back to top
IP Logged
Reply #26 -
Oct 8
th
, 2011 at 8:01pm
c130lover
Offline
Colonel
Allons-y!
U.S.A
Gender:
Posts: 326
it would be awesome if you could make an accurate version of KJYO! thats where I'm getting my license. heres some helpful links
http://www.airnav.com/airport/JYO
http://en.wikipedia.org/wiki/Leesburg_Executive_Airport
Back to top
IP Logged
Reply #27 -
Oct 8
th
, 2011 at 11:47pm
Capt.Propwash
Offline
Colonel
Let's get a little mud
on the tires!
KCHS, Charleston, SC, USA
Gender:
Posts: 1958
Club508.... you dont care where in the world your airport sits? I can do FS9 airports with no problem (just not fsx).
question. for your airport, does it HAVE to have taxiway/runway signs? I can do those too, but it might take a little longer to do being that I have not worked with Sbuilder in a while, and I'll have to figure it out again. (but then again, i could always add them in later as an update for you)
2 airports that I have uploaded to here (if the main site would come back up again) are 25LS - Rotorcraft Leasing Corporation, and KDVI - Desert View International.
I have also made a fictional Military Base out of Tereen, Afghanistan.
http://i101.photobucket.com/albums/m66/437thVAC/TereenAFB.jpg
Sorry for the link, but seeing as how the main site is down, and the uploader is linked to the main site, it is down too..... Once the main site is up again I will upload the pic to here and then replace this with the correct link.
@Club508... there are only 4 runways as of yet, there is a water runway on a lake that is just out the picture to the right side (this is an upgrade of a default scenery, but I am nowhere near done with it yet.... this shows the night lighting 'taxiways and runways at night') ... is this good enough or do you require the other runways as requested??
http://i101.photobucket.com/albums/m66/437thVAC/U93-Upgrade.jpg
«
Last Edit: Oct 9
th
, 2011 at 5:37pm by Capt.Propwash
»
The thoughts and expressions contained in the post above are solely my own, and not necessarily those of Simviation.com, its Moderators, its Staff, its Members, or other guests. They can not, are not, and will not be held liable for any thoughts, or expressions, or posts that I have made, or will make in the future.
Computer Specs:: Acer Aspire Laptop..Win7 Home Premium 64-bit (sp1), AMD Athlon II X2 P340 (Dual Core) [2.2 Ghz], ATI Mobility Radeon HD 4250 (256mb), 4GB DDR3......FS9.1(sp3) / FSX (sp2)..... Ultimate Terrain X, Ground Environment X, REX, FTX ORBX PNW-PFJ-NRM-CRM, OZx, Tongass Fjords, Misty Moorings
Back to top
IP Logged
Reply #28 -
Oct 10
th
, 2011 at 10:39pm
Genio
Offline
2nd Lieutenant
I Love YaBB 2.5 AE!
Posts: 1
KPVD
This is a busy airport that is the main airport for Southern New England. It is used by major airlines including Southwest, Continental, USAir, Delta and flights to Cape Cod, Martha's Vineyard and Nantucket. Photo-real textures and models of the actual buildings would be great. As we are in the north, seasonal effects would also be appreciated!
Thanks!
Genio R.
Back to top
IP Logged
Reply #29 -
Oct 11
th
, 2011 at 3:30am
Luka
Offline
Colonel
Gender:
Posts: 49
KSPS
Can you make a real scenery of this airbase for fs9,
not just pimping up the default ?thank you very much.
Back to top
IP Logged
Pages:
1
2
3
‹
Previous Topic
|
Next Topic
›
« Home
‹ Board
Top of this page
Forum Jump »
Home
» 10 most recent Posts
» 10 most recent Topics
Current Flight Simulator Series
- Flight Simulator X
- FS 2004 - A Century of Flight
- Adding Aircraft Traffic (AI) & Gates
- Flight School
- Flightgear
- MS Flight
Graphic Gallery
- Simviation Screenshots Showcase
- Screenshot Contest
- Edited Screenshots
- Photos & Cameras
- Payware Screenshot Showcase
- Studio V Screenshot Workshop
- Video
- The Cage
Design Forums
- Aircraft & 3D Design
- Scenery & Panel Design ««
- Aircraft Repainting
- Designer Feedback
General
- General Discussion
- Humour
- Music, Arts & Entertainment
- Sport
Computer Hardware & Software Forum
- Hardware
- Tweaking & Overclocking
- Computer Games & Software
- HomeBuild Cockpits
Addons Most Wanted
- Aircraft Wanted
- Other Add-ons Wanted
Real World
- Real Aviation
- Specific Aircraft Types
- Autos
- History
On-line Interactive Flying
- Virtual Airlines Events & Messages
- Multiplayer
Simviation Site
- Simviation News & Info
- Suggestions for these forums
- Site Questions & Feedback
- Site Problems & Broken Links
Combat Flight Simulators
- Combat Flight Simulator 3
- Combat Flight Simulator 2
- Combat Flight Simulator
- CFS Development
- IL-2 Sturmovik
Other Websites
- Your Site
- Other Sites
Payware
- Payware
Old Flight Simulator Series
- FS 2002
- FS 2000
- Flight Simulator 98
Simviation Forum
» Powered by
YaBB 2.5 AE
!
YaBB Forum Software
© 2000-2010. All Rights Reserved.