Simviation Forum - Can I drive real gauges for a J-3?

	Search the archive:

Simviation Main Site | Site Search | Upload Images

Simviation Forum › Computer Hardware & Software Forum › HomeBuild Cockpits › Can I drive real gauges for a J-3?

(Moderators: Mitch., Fly2e, ozzy72, beaky, Clipper, JBaymore, Bob70, BigTruck)

‹ Previous Topic | Next Topic ›

Pages: 1

Can I drive real gauges for a J-3? (Read 933 times)

Oct 15^th, 2010 at 1:21pm

Titan_Bow Offline
Colonel
virtual Cub owner
Longmont, CO

Gender:
Posts: 86

So, I want to commit to building a simpit along with the new system I am putting together for FSX. I am thinking of fabricating the cockpit portion of a J-3, using 3 large monitors, and enclosing everything else to give better immersion. The question I have, is how difficult, and where would I start, to figure out a way to drive the actual gauges of a J-3? I want the outside view to be just that, and not have the cockpit as part of the view.
All I'd need is a tach, compass, altimeter, airspeed indicator, and oil temp/pressure. I'd like to drive real gauges if possible, but if thats not feasible, whats the best way to go about a 4th monitor and make it actually look like real gauges and not a screen?

IP Logged

Reply #1 - Oct 15^th, 2010 at 9:53pm

nemesis19 Offline
Colonel
BAe146-3OO G-JEBG FlyBe
LFBV

Posts: 26

Quote:

The question I have, is how difficult, and where would I start,

How difficult depends on how realistic you want it to be and on your DIY skills. Where to start? Read as much as you can on this forum and other cockpit/simpit building forums.

Quote:

I'd like to drive real gauges if possible, but if thats not feasible, whats the best way to go about a 4th monitor and make it actually look like real gauges and not a screen?

Real gauges are possible using servos and interface boards such as Phidgets and/or OpenCockpits (links in the sticky at the top of this forum), however the 4th monitor may be the cheaper solution using gauge software such as FSXpand (again you'll find the link in the sticky), which is not too expensive, is fully configurable from J3 type gauges to B747 and you can try before you buy. You place the monitor behind your instrument panel, with cutouts for the gauges. If the instrument panel is not too thick and with some neat gauge bezels in front, these can quite look the part.

No doubt John (Darth Vador) Baymore will soon be along to welcome you down this dimly lit way with a few more suggetions.

Regards,
...........Adrian19

IP Logged

Reply #2 - Oct 16^th, 2010 at 10:11am

westside Offline
Colonel
Rescue 902 ,The deck is
clear for your second
drop
British Columbia Canada

Gender:
Posts: 158

This is the next best thing to real gauges

http://www.flightillusion.com/

IP Logged

Reply #3 - Oct 18^th, 2010 at 4:30pm

Romflyer Offline
Colonel
Hello!
Canada

Gender:
Posts: 365

westside wrote on Oct 16^th, 2010 at 10:11am:

This is the next best thing to real gauges

http://www.flightillusion.com/

This is the next best thing to ~~real gauges~~ Flight Illusion gauges Grin

http://www.saitek.com/uk/prod/fip.html

IP Logged

Reply #4 - Oct 20^th, 2010 at 11:15am

westside Offline
Colonel
Rescue 902 ,The deck is
clear for your second
drop
British Columbia Canada

Gender:
Posts: 158

Hey Guys

I just got two of those Saitek Pro Instruments working last night. I have had them for a year but they are extremely taxing on the video portion of the computer. Last week I was doing some research on them and discovered that you can use them on a separate networked computer. Last night was the first time these gauges came to life without messing up my framerates. The networking process took a bit of time and the help of my local computer guy but in the end it worked. I would still like to try a set of flight illusion gauges. They look really well built but the whole importing from Europe thing is the question. They are quite expensive as well. As far as the networking thing goes it opens up many more new possibilities (FSWideVeiw and separate Avionics suites such as Ellie)

Peace
Mark

IP Logged

Reply #5 - Oct 21^st, 2010 at 3:07pm

Romflyer Offline
Colonel
Hello!
Canada

Gender:
Posts: 365

I always have thought that the cost of the Saitek gauges didnt make any sense, at $150 each it turns into $1200+ to make a sixpack of the primary instruments.....if you undock a seperate window with gauges and move them to a second monitor........cut six holes in a piece of MDF and stick it in front of the gauges monitor and your on your way.... Wink

IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page