Ok Im thinking of building a flight deck, but I really dont know where to begin, and by that I don't mean "I don't know where to look" (i got plunty of sites and what not) its mroe of a "what type of pit/set up can I build that gives me what I want but still will be able to do multi plane flying"

IE a setup that can be used for jets or props and not look out of place when flying either (as in 747 setup when flying a cessna)

also does anyone have suggestings on what type of parts to use or what materials to use?

I am thinking of going more for multi engin style (since I can always turn off two throttles verses trying to add more)


anyother ideas commants concerns also welcome, I never did this type of thing before (although I am not new to building custom computer rigs but this still is a new thing for me) so I would like to get as mich info before I start spending money on parts.


at this time I am thinking of going with the saitek pro flight products, but I dont know how well that will work...

hmmm true, and thanks...I tend to fly more the jet planes, usually the smallest I fly is a lear 45 (or similar) plane and any thing bigger...biggest I have flown is the AN-225 for FSX...so I gonna possibly go multi engin, I can always set it up so if I got two engin lear jet and 4 throttles the 3rd and 4th throttle basicially are not used...least I think i can...


I am lookin to go along the lines or at least follow the lear jet or boeing setups, more along the 747 ish range.



EDIT: ok just looked at all the different things and all I can say is...damn....looks like its gonna get alot more complicated then I thought it already was...unfurtunatly I have more questions then answers provided ...oh well I will hopefully figure out somthin, in the mean time I guess I could stick to my plans to buy the saitek equipment and as time permits and when able slowly swap things out for what I want when I finially can hopefully start building my pit...



also whats the avrage size of a full B747 pit? (or A380 [which ever would be the biggest])...I would ask about the AN-225 but I know more then likely one has never been done...

What's your budget? Do you want to start piece by piece and build slowly or get it all done now?

How much space do you have?

well personally I would love to get it all done in one run but thats gonna be impossible (unless I get lucky and find the money I will need)

budget...as inexpensive as I can keep it as for space, I wish I had alot, but sadly I dont have much and I dont think I will be moving my PC from my room to the basement, plus I got chairs and stuff i would have to move from the basement... so sadly it seemes this idea died before it could begin unless I can find some kind of alternative...


although would a picture of my computers current location help any in figureing out any kind of solution? cus I would like to get some kind of set up that at least would function like the rear stuff (and still allow for me to store it when I dont need it) and when in use keep it all on the floor with part (hopefully) under a table to keep the entire foot print as small as possible...


UPDATE:

The idea has renewed steam, the goflight (thanks) is small enough that its highest point is only 25" (YAY) so it would fit under the table in my room with minimal stick out, and it can hold up to 14 pieces so thats a good thing, now I just got to figure if this stuff (the panels and all that hardware) is the type you assemble your self or if it will come ready to plug and play...


never done this type of project so it should be interesting when I pull the trigger and start it...hehe

Nice to see the cockpit builders out there. I have built a general purpose jet pit that I am happy with. Most of it is off the shelf and plug and play. I can go from a Cessna 172 to a B747 without much trouble. I have found good luck with Go-Flight and Saitek.
I started with a good computer and basic controls(yoke,pedals and throttles) and went from there.
Start slow and add when you can. This site is also very helpful and there are alot of great people here.
Good Luck
Mark

Go Flight equipment is about the absolute cheapest outboard equipment you will find anywhere. I didn't mention this equipment in my original post as it's for GA size-wise. It will work for any pit, but it will not fit a standard Boeing or Airbus equipment rack. It's the size of Narco/King/Bendix radio gear for MIP installation in a GA aircraft.

Something you've probably already found out is that this hobby is not cheap by any means. Even the cheapest equipment will still tally a large amount if you buy everything you need to equip even a modest desktop setup.

Boeing or Airbus type radio heads, $190-$450
One Korry indicator, $20-$50
A single GA instrument, $125-$350
Control yoke, real, $150-$500
Aircraft seat, $500-$2500, used, probably need maintenance and recovering.
Set of landing light switches, $160
Etc, etc, etc. And that is not even factoring in the software, monitors, and computers, along with all of the other hardware needed for a simulator.

Wait till you graduate to the big boy Boeing and Airbus cockpits. You'll be looking at some real cash then. A lot can be saved by building what you need.

I'm not trying to rain on your parade, but you need to be made aware of what you're getting yourself into.

BSW727 wrote on Dec 14^th, 2009 at 9:44am:


Well said.

Jamie, take the budget, double it, then add three zeros.   

best,

..................john