Simviation Forum - radio break through

Oct 8^th, 2009 at 1:21pm

RAFAIR100 Offline
Colonel
I love YaBB 1G - SP1!

Posts: 217

My downloaded Luscombe 8A Silvaire has the radio idents on all the time. I have tried switching the idents off on the 'prop erk' panels but they still break through. Very annoying ! Anyone have any ideas how I can get rid of them?

Back to top

IP Logged

Reply #1 - Oct 8^th, 2009 at 1:27pm

Fozzer Offline
Colonel
An elderly FS 2004 addict!
Hereford. England. EGBS.

Posts: 24861

[quote author=RAFAIR100 link=1255022508/0#0 date=1255022508]My downloaded Luscombe 8A Silvaire has the radio idents on all the time. I have tried switching the idents off on the 'prop erk' panels but they still break through. Very annoying ! Anyone have any ideas how I can get rid of them?[/quote]

Load up the Default Cessna 172, open the Bendix-King Radio Stack, switch off all the Ident switches, cancel the Autopilot if its on, then switch off the Radio...
return back to your preferred Aircraft again..
..see if the problem goes away... ;)...!

Paul..G-BPLF...FS 2004... 8-)...!

Dell Dimension 5000 BTX Tower. Win7 Home Edition, 32 Bit. Intel Pentium 4, dual 2.8 GHz. 2.5GB RAM, nVidia GF 9500GT 1GB. SATA 500GB + 80GB. Philips 17" LCD Monitor. Micronet ADSL Modem only. Saitek Cyborg Evo Force. FS 2004 + FSX. Briggs and Stratton Petrol Lawn Mower...Motor Bikes. Gas Cooker... and lots of musical instruments!.... ...!
Yamaha MO6,MM6,DX7,DX11,DX21,DX100,MK100,EMT10,PSR400,PSS780,Roland GW-8L v2,TR505,Casio MT-205,Korg CX3v2 dual manual,+ Leslie 760,M-Audio Prokeys88,KeyRig,Cubase,Keyfax4,Guitars,Orchestral,Baroque,Renaissance,Medieval Instruments.

Back to top

IP Logged

Reply #2 - Oct 9^th, 2009 at 4:10am

RAFAIR100 Offline
Colonel
I love YaBB 1G - SP1!

Posts: 217

Thank you. I'll give it a try.

Back to top

IP Logged

Reply #3 - Oct 9^th, 2009 at 7:06am

Fozzer Offline
Colonel
An elderly FS 2004 addict!
Hereford. England. EGBS.

Posts: 24861

..very often when you have been flying a Plane and have been using the Radio Autopilot, etc, and shut the engine down with the Mixture control, ....when you change Aircraft you will sometimes find that many of the previous settings still remain to affect your new Aircraft!... Shocked

...!
The engine will not start because the Mixture was set to Weak cut-off, and the Autopilot is suddenly taking over the control of the Aircraft from you!... Shocked

...!
Return temporally to the Default Cessna 172, set the Mixture to Full rich, Switch off ALL the Radio settings in the Bendix-King, Switch the Radio off, then go back to your selected Aircraft again with the settings at neutral...

...!

The occasional reason for impossible control of your new Aircraft is often due to the Radio (Autopilot) settings on the previous Aircraft having been left on..!

Paul...G-BPLF...FS 2004... Cool

...!

P.S. ..if you are having problems starting your new Aircraft Engine, first press Ctrl+Shift+F4...(Mixture full rich).
(Ctrl+Shift+F1 is Mixture Weak Cut-off, to stop the Engine).

Dell Dimension 5000 BTX Tower. Win7 Home Edition, 32 Bit. Intel Pentium 4, dual 2.8 GHz. 2.5GB RAM, nVidia GF 9500GT 1GB. SATA 500GB + 80GB. Philips 17" LCD Monitor. Micronet ADSL Modem only. Saitek Cyborg Evo Force. FS 2004 + FSX. Briggs and Stratton Petrol Lawn Mower...Motor Bikes. Gas Cooker... and lots of musical instruments!.... ...!
Yamaha MO6,MM6,DX7,DX11,DX21,DX100,MK100,EMT10,PSR400,PSS780,Roland GW-8L v2,TR505,Casio MT-205,Korg CX3v2 dual manual,+ Leslie 760,M-Audio Prokeys88,KeyRig,Cubase,Keyfax4,Guitars,Orchestral,Baroque,Renaissance,Medieval Instruments.

Back to top

IP Logged

Reply #4 - Oct 9^th, 2009 at 9:00am

Mazza Offline
Colonel
:D
Melbourne, Australia.

Gender:
Posts: 3184

Fozzer wrote on Oct 9^th, 2009 at 7:06am:

..very often when you have been flying a Plane and have been using the Radio Autopilot, etc, and shut the engine down with the Mixture control, ....when you change Aircraft you will sometimes find that many of the previous settings still remain to affect your new Aircraft!... Shocked

...!
The engine will not start because the Mixture was set to Weak cut-off, and the Autopilot is suddenly taking over the control of the Aircraft from you!... Shocked

...!
Return temporally to the Default Cessna 172, set the Mixture to Full rich, Switch off ALL the Radio settings in the Bendix-King, Switch the Radio off, then go back to your selected Aircraft again with the settings at neutral...

...!

The occasional reason for impossible control of your new Aircraft is often due to the Radio (Autopilot) settings on the previous Aircraft having been left on..!

Paul...G-BPLF...FS 2004... Cool

...!

P.S. ..if you are having problems starting your new Aircraft Engine, first press Ctrl+Shift+F4...(Mixture full rich).
(Ctrl+Shift+F1 is Mixture Weak Cut-off, to stop the Engine).

I have to cut the Mix' when ma F-18 Super I put on unlimited fuel ( Cool

) and go FULL THROTTLE I CAN HIT MACH 4.82 RAWR!!!! Then bye bye engine to slow down because I go faster when idle throttle Shocked

I use this on the 200nm+ SimV hops, because I can do it in about 5 mins Cheesy

Sunset Chasing...RULES

AMD 9550 2.43 X4 - 2Gb RAM 800Mhz DDRII - Asus 4670
Corsair TX-750W

Back to top

IP Logged

Reply #5 - Oct 9^th, 2009 at 2:27pm

RAFAIR100 Offline
Colonel
I love YaBB 1G - SP1!

Posts: 217

Again, thank you. Although I ALWAYS switch the autopilot off before landing, I have had this problem of being unable to start up on the next flight. We live and learn - thanks to the contributors to this forum.

Back to top

IP Logged

	Search the archive: