Simviation Forum - My First AI Modification

	Search the archive:

Simviation Main Site | Site Search | Upload Images

Simviation Forum › Current Flight Simulator Series › Adding Aircraft Traffic (AI) & Gates › My First AI Modification

(Moderators: Mitch., Fly2e, ozzy72, beaky, Clipper, JBaymore, Bob70, BigTruck)

‹ Previous Topic | Next Topic ›

Pages: 1

My First AI Modification (Read 593 times)

Jan 15^th, 2008 at 10:02pm

Flaps30 Offline
Lieutenant Colonel
Hello!

Posts: 5

I just decided it's time to modify my local airport's (KAVP) parking. Airline traffic parks in the GA area, and nothing parks where it is supposed to. I have AFCAD 2.21 and read most of the manual, but when I click on the green parking discs, I don't know how to specify GA airplanes only. The airline codes seem to be for airlines only. How do I get these parking spots to specify just GA planes only? Thanks. regards, Tom

IP Logged

Reply #1 - Jan 16^th, 2008 at 11:04am

f14driver Offline
Colonel
If you can't duck you
ran out of luck.....
NL

Gender:
Posts: 62

If you want to use the parking spots for GA only then you might want to change them to a GA parking spot. When looking at the green discs, select one, right click and select properties, then adjust the parking spot type to parking small or medium GA spots. The parking is dependant on the radius of the aircraft so if you aircraft is for example equipped with a radius of 10 mtrs then the parking spot has to be the same size (actually a 10 m aircraft requires a 10.1 m parking spot)

IP Logged

Reply #2 - Jan 17^th, 2008 at 7:55pm

Flaps30 Offline
Lieutenant Colonel
Hello!

Posts: 5

Thanks f14,
I will give that a try. I didn't know that would do it by itself. I thought it needed a code also. Regards, Tom.

IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page