Search the archive:
 YaBB - Yet another Bulletin Board
 
   
 
  Simviation Forum › Design Forums › Aircraft & 3D Design › Magni Vale 3/4
(Moderators: Mitch., Fly2e, ozzy72, beaky, Clipper, JBaymore, Bob70, BigTruck)
‹ Previous Topic | Next Topic ›
Pages: 1 2 
Send Topic Print
Magni Vale 3/4 (Read 2017 times)
Dec 20th, 2007 at 8:29pm

Falcon500   Offline
Colonel
Doing my best, against
the badger!
Northern Michigan, USA

Gender: male
 Posts: 1026
 *****
 
I have been at school for a while and have not been on the computer for.... well since september and the past few days i have been pushing vertices on my Magni Vale.

Have you ever reached "that point" where you dont know where else to go, I also have learned that my driver causes my computer to crash while using Gmax, and i still cannot see the vertices! Cry


anywho here are a few pics of what it looks like now, i have the (prop)'s animated the wheels for rolling but not the tailwheel for rotation, the ailerons and the rudder, i have yet to cut out the elevators


...

...

...

...

...




I cannot "roll back" my drivers and my driver came with the machine so no disk, and santy claus aint into that stuff Sad


Undecided
 
What do I do you ask? I struggle! Then destroy! Then try to put back together what I just broke on accident.....&&&&&&&&&&                        The GMax effect... The GMax effect
Back to top 
IP Logged
 
Reply #1 - Dec 20th, 2007 at 10:49pm

Dornep   Offline
Colonel
That guy
Florida

Gender: male
 Posts: 67
 *****
 
Looking great!

I also found out that my crashing issue with 3dsmax was cause by an nvidia driver. It would run fine as long as I was working in max but if I minimized max and left it for a few minutes... It would almost always crash when I maximized it. I surfed the forums and many other people had the same problems and had found a stable driver that didnt cause max to crash.

Anyway your model looks great and it looks like its about time for a paint job.  Cool

EDIT*******************
To add to what I said about the driver issue... Try googling your problem and usually you will find people with the same issues trying to solve the problem on other forums. This is how I found out which nvidia driver I needed to keep 3dsmax stable.

BTW what type of video card do you have and what driver version?
« Last Edit: Dec 22nd, 2007 at 12:07pm by Dornep »  
My Gaming Rig.
CPU:
PII 400MHz
RAM:
32MB SDRAM
GFX:
Quantum Raven 16MB PCI
CDR:
12X CD-Rom
OS:
Dos
Back to top 
IP Logged
 
Reply #2 - Jan 1st, 2008 at 5:00pm

Falcon500   Offline
Colonel
Doing my best, against
the badger!
Northern Michigan, USA

Gender: male
 Posts: 1026
 *****
 
sorry its been so long, i have a Nvidia Geforce 4 MX video and i have know idea what version
 
What do I do you ask? I struggle! Then destroy! Then try to put back together what I just broke on accident.....&&&&&&&&&&                        The GMax effect... The GMax effect
Back to top 
IP Logged
 
Reply #3 - Jan 1st, 2008 at 9:49pm

Wing Nut   Offline
Colonel
Hoy-Hoy!

Gender: male
 Posts: 14173
 *****
 
Sweet...  If you need any pics of that engine, let me know.  They have one very similar (if not the same) out at Fantasy of Flight and I have an annual pass.  Like I needed an excuse...  Wink
 
HP p7-1300w
AMD Athlon II X4 650 Quad-core 3.2 Ghz
23" HP Widescreen monitor/19" Dell monitor
Windows 7 Home Premium
16 Gb DDR3 PC10600 Ram
1 Gb GeForce GTX 550Ti video card
1 TB RAID Drives

If you want to see the most beautiful girl in the world, CLICK HERE!
Back to top 
IP Logged
 
Reply #4 - Jan 1st, 2008 at 10:39pm

Falcon500   Offline
Colonel
Doing my best, against
the badger!
Northern Michigan, USA

Gender: male
 Posts: 1026
 *****
 
well cockpit and engine photos would be nice, it would make it more realistic as i just thought of a couple average gauges and put them in, and decided thats what the seat looked like, and the engine is a modeled after pic of a gnome rhone 5 i found


progress is slow, i still cant see the vertices so i have to do everything by eye
 
What do I do you ask? I struggle! Then destroy! Then try to put back together what I just broke on accident.....&&&&&&&&&&                        The GMax effect... The GMax effect
Back to top 
IP Logged
 
Reply #5 - Jan 2nd, 2008 at 12:02am

Wing Nut   Offline
Colonel
Hoy-Hoy!

Gender: male
 Posts: 14173
 *****
 
Well, I can't help you on the cockpit, but I'm pretty sure they have that engine.  Which one is it again?
 
HP p7-1300w
AMD Athlon II X4 650 Quad-core 3.2 Ghz
23" HP Widescreen monitor/19" Dell monitor
Windows 7 Home Premium
16 Gb DDR3 PC10600 Ram
1 Gb GeForce GTX 550Ti video card
1 TB RAID Drives

If you want to see the most beautiful girl in the world, CLICK HERE!
Back to top 
IP Logged
 
Reply #6 - Jan 2nd, 2008 at 12:30am

Dornep   Offline
Colonel
That guy
Florida

Gender: male
 Posts: 67
 *****
 
Falcon have you tried a different display Driver in Gmax?

If your display driver is set to DirectX I would try it with OpenGL and see what happens. I've noticed that using DirectX display driver in Max used to cause me a lot of crashes and lost work. I use the OpenGL display driver now and I don't crash nearly as often as I used to. 3dsMax and Gmax are basically the same program graphically and I would imagine that what works best in one, will be good for the other also.

As for finding out what version of drivers your video card is running, when was the last time you updated your drivers? Also you can find out by going to the device manager in My Computer/ System Properties and checking the info on your Display Adapter.

Good luck.
 
My Gaming Rig.
CPU:
PII 400MHz
RAM:
32MB SDRAM
GFX:
Quantum Raven 16MB PCI
CDR:
12X CD-Rom
OS:
Dos
Back to top 
IP Logged
 
Reply #7 - Jan 2nd, 2008 at 9:12am

Falcon500   Offline
Colonel
Doing my best, against
the badger!
Northern Michigan, USA

Gender: male
 Posts: 1026
 *****
 
the engine type it a Farnia T-58

and how would I change it to openGL
 
What do I do you ask? I struggle! Then destroy! Then try to put back together what I just broke on accident.....&&&&&&&&&&                        The GMax effect... The GMax effect
Back to top 
IP Logged
 
Reply #8 - Jan 2nd, 2008 at 2:27pm

Falcon500   Offline
Colonel
Doing my best, against
the badger!
Northern Michigan, USA

Gender: male
 Posts: 1026
 *****
 
willing to give up some frames?

...




and this is the best pic i could find of the engine (da tail) not detail

...

 
What do I do you ask? I struggle! Then destroy! Then try to put back together what I just broke on accident.....&&&&&&&&&&                        The GMax effect... The GMax effect
Back to top 
IP Logged
 
Reply #9 - Jan 2nd, 2008 at 2:38pm

Wing Nut   Offline
Colonel
Hoy-Hoy!

Gender: male
 Posts: 14173
 *****
 
First go to 'Customize' then down to 'Preferences'

...

Make sure the 'Viewports' tab is selected, then go down to 'Choose Driver'

...

Then simply click on 'Open GL' click 'OK' to get out of there, and you're set...

...
 
HP p7-1300w
AMD Athlon II X4 650 Quad-core 3.2 Ghz
23" HP Widescreen monitor/19" Dell monitor
Windows 7 Home Premium
16 Gb DDR3 PC10600 Ram
1 Gb GeForce GTX 550Ti video card
1 TB RAID Drives

If you want to see the most beautiful girl in the world, CLICK HERE!
Back to top 
IP Logged
 
Reply #10 - Jan 2nd, 2008 at 3:30pm

Falcon500   Offline
Colonel
Doing my best, against
the badger!
Northern Michigan, USA

Gender: male
 Posts: 1026
 *****
 
Kevin and Dornep Ill kiss ya  Cheesy:D:D:D:D:D:D

i have vertices again WOOOOOOOOHOOOOOOOO!!!!!!!!!!!!!!!!!!





Had to change it from openGL not to
 
What do I do you ask? I struggle! Then destroy! Then try to put back together what I just broke on accident.....&&&&&&&&&&                        The GMax effect... The GMax effect
Back to top 
IP Logged
 
Reply #11 - Jan 2nd, 2008 at 9:03pm

Falcon500   Offline
Colonel
Doing my best, against
the badger!
Northern Michigan, USA

Gender: male
 Posts: 1026
 *****
 
may not look a whole lot different but i changed nearly every part on it except the props

...

...

...
 
What do I do you ask? I struggle! Then destroy! Then try to put back together what I just broke on accident.....&&&&&&&&&&                        The GMax effect... The GMax effect
Back to top 
IP Logged
 
Reply #12 - Jan 2nd, 2008 at 9:44pm

Wing Nut   Offline
Colonel
Hoy-Hoy!

Gender: male
 Posts: 14173
 *****
 
You kiss me and I'll belt you one...  Cheesy
 
HP p7-1300w
AMD Athlon II X4 650 Quad-core 3.2 Ghz
23" HP Widescreen monitor/19" Dell monitor
Windows 7 Home Premium
16 Gb DDR3 PC10600 Ram
1 Gb GeForce GTX 550Ti video card
1 TB RAID Drives

If you want to see the most beautiful girl in the world, CLICK HERE!
Back to top 
IP Logged
 
Reply #13 - Jan 4th, 2008 at 12:26pm

Dornep   Offline
Colonel
That guy
Florida

Gender: male
 Posts: 67
 *****
 
Well thats great news!

I've always heard that Nvidia drivers beat the crap out of ATI in OpenGL, but are not so good compared to ATI in DirectX so I thought that might be your issue... Guess I was backwards.  Cheesy


I can only imagine how hard it would be to accurately model something with no visible vertices, but you have done a helluva job so far.

Keep it up and great work!

BTW I'm with Kevin on the whole kissing thing.... Grin
 
My Gaming Rig.
CPU:
PII 400MHz
RAM:
32MB SDRAM
GFX:
Quantum Raven 16MB PCI
CDR:
12X CD-Rom
OS:
Dos
Back to top 
IP Logged
 
Reply #14 - Jan 4th, 2008 at 10:05pm

Falcon500   Offline
Colonel
Doing my best, against
the badger!
Northern Michigan, USA

Gender: male
 Posts: 1026
 *****
 
Dornep wrote on Jan 4th, 2008 at 12:26pm:
BTW I'm with Kevin on the whole kissing thing.... Grin


how bout a victory cigar  Cool




as for the Magni, i have all the surfaces animated (other than the flaps rotate up  Roll Eyes)
 
What do I do you ask? I struggle! Then destroy! Then try to put back together what I just broke on accident.....&&&&&&&&&&                        The GMax effect... The GMax effect
Back to top 
IP Logged
 
Pages: 1 2 
Send Topic Print
‹ Previous Topic | Next Topic ›
  « Home ‹ Board Top of this page

Simviation Forum » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge