Search the archive:
 YaBB - Yet another Bulletin Board
 
   
 
  Simviation Forum › Combat Flight Simulators › Combat Flight Simulator › Windows Vista
(Moderators: Mitch., Fly2e, ozzy72, beaky, Clipper, JBaymore, Bob70, BigTruck)
‹ Previous Topic | Next Topic ›
Pages: 1 2 
Send Topic Print
Windows Vista (Read 8950 times)
May 27th, 2007 at 8:46pm

mikel11755   Offline
Captain
I Fly Sim!

Gender: male
 Posts: 3
 ***
 
Hello...I am having problems using the sim with Windows Vista. It installed ok but when I try to run it nothing works correctly. Joystick doesn't respond & sometims half the screen isn't there. Aby one have any ideas?? I haven't tries yet to install CFS2 or CFS3 yet. Figure the same thing will happen. Thanks... Mikel
 
Back to top 
IP Logged
 
Reply #1 - May 29th, 2007 at 4:37am

DrRedskwirrell   Offline
Colonel
Happiness is cuddling
the world's cutest Bare
A nice warm cave in the woods.

Gender: male
 Posts: 193
 *****
 
That's a worry, I've just installed Vista Home Premium (32-bit) but not got around to putting CFS1 on yet.

If it doesn't work in Vista, I'll try making a dual boot system with XP on another partition and run it and my joystick (FFB2) drivers from there.

If you're only running / going to run 64-bit, your woes might not be cured that simply as there are loads of software compatability issues with it. I can't see M$ producing anything to make CFS1 compatable as they stopped supporting it years ago to try and move everyone onto CFS2 and 3.
 
Back to top 
IP Logged
 
Reply #2 - May 29th, 2007 at 10:11am

H   Offline
Colonel
2003: the year NH couldn't
save face...
NH, USA

Gender: male
 Posts: 6837
 *****
 
Does Vista have the "Run as..." option when you click onto the 'program properties' like XP does?



Cool
 
Back to top 
IP Logged
 
Reply #3 - May 29th, 2007 at 11:58am

dcunning30   Offline
Colonel
This is me......really!!!!
The Land of Nod

Gender: male
 Posts: 1612
 *****
 
I don't know about CFS1, but CFS2 and CFS3 work fine on Vista.

Have you made sure your video drivers are up to date?
 
TURKEY TROTS TO WATER GG WHERE IS RPT WHERE IS TASK FORCE 34 RR THE WORLD WONDERS
Back to top 
IP Logged
 
Reply #4 - May 29th, 2007 at 12:56pm

mikel11755   Offline
Captain
I Fly Sim!

Gender: male
 Posts: 3
 ***
 
Thank You all...I haven't looked to see if Vista has a "run as" option but I did try the combatibility option & set it to XP but that didn't work. I installed CFS2 & CFS 3 & they both work great. So, maybe CFS1 is just to old. I'll keep playing with it & if I find a solution, I will post it. Once Again...Thank you...
 
Back to top 
IP Logged
 
Reply #5 - May 29th, 2007 at 12:57pm

DrRedskwirrell   Offline
Colonel
Happiness is cuddling
the world's cutest Bare
A nice warm cave in the woods.

Gender: male
 Posts: 193
 *****
 
Also, just occurred to me in this world of Hard drive partitions, I think CFS1 used to have a problem working on anything other than its' default install address.
If you've installed it to a different partition some files may not be able to hook up to the resources they need.
 
Back to top 
IP Logged
 
Reply #6 - May 29th, 2007 at 12:59pm

mikel11755   Offline
Captain
I Fly Sim!

Gender: male
 Posts: 3
 ***
 
About the video drivers...I just bought the puter a couple weeks ago, So I hope they are up to date..But then again... You never know..Will have to check that out also..Thanks
 
Back to top 
IP Logged
 
Reply #7 - May 29th, 2007 at 1:16pm

Hagar   Offline
Colonel
My Spitfire Girl
Costa Geriatrica

Posts: 33159
 *****
 
DrRedskwirrell wrote on May 29th, 2007 at 12:57pm:
Also, just occurred to me in this world of Hard drive partitions, I think CFS1 used to have a problem working on anything other than its' default install address.
If you've installed it to a different partition some files may not be able to hook up to the resources they need.

In the old days I had two hard drives & the biggest one was partitioned. I used this one for sims like CFS1 & FS98. I found CFS1 would run from almost anywhere without a problem, even a remote hard drive. It's a very uncomplicated program compared with the later MS sims but remember it was originally intended for Win95. Some people reported problems running it on WinXP but I can only say it works fine for me. However, running these old programs on Vista might be a completely different proposition.
 
...

Founder & Sole Member - Grumpy's Over the Hill Club for Veteran Virtual Aviators
Member of the Fox Four Group

Need help? Try Grumpy's Lair

My photo gallery
Back to top 
IP Logged
 
Reply #8 - May 29th, 2007 at 2:39pm

dcunning30   Offline
Colonel
This is me......really!!!!
The Land of Nod

Gender: male
 Posts: 1612
 *****
 
mikel11755 wrote on May 29th, 2007 at 12:59pm:
About the video drivers...I just bought the puter a couple weeks ago, So I hope they are up to date..But then again... You never know..Will have to check that out also..Thanks



Don't depend on that.  That computer might have been sitting in a warehouse for a period of time.  And Vista drivers are being updated at a fairly rapid pace.  I bought my video card for my computer about 2 months ago and I'm now on my 3rd version of video drivers.
 
TURKEY TROTS TO WATER GG WHERE IS RPT WHERE IS TASK FORCE 34 RR THE WORLD WONDERS
Back to top 
IP Logged
 
Reply #9 - May 29th, 2007 at 6:28pm

james007   Offline
Colonel
I love YaBB 1G - SP1!

Posts: 1514
 *****
 
Dcunning30 the question is CFS1 working with your Vista window in your PC.

Thank you!
 
Back to top 
IP Logged
 
Reply #10 - May 30th, 2007 at 9:51am

dcunning30   Offline
Colonel
This is me......really!!!!
The Land of Nod

Gender: male
 Posts: 1612
 *****
 
james007 wrote on May 29th, 2007 at 6:28pm:
Dcunning30 the question is CFS1 working with your Vista window in your PC.

Thank you!


I already answered his question.  I told him I don't know.  But since he also mentioned CFS2 and CFS3, I was able to respond to that.  Then when he mentioned his new computer and the subject of drivers, I was able to respond to that as well.

Roll Eyes
 
TURKEY TROTS TO WATER GG WHERE IS RPT WHERE IS TASK FORCE 34 RR THE WORLD WONDERS
Back to top 
IP Logged
 
Reply #11 - May 30th, 2007 at 7:55pm

H   Offline
Colonel
2003: the year NH couldn't
save face...
NH, USA

Gender: male
 Posts: 6837
 *****
 
mikel11755 wrote on May 29th, 2007 at 12:56pm:
...I did try the combatibility option & set it to XP...
That would be what I meant by the 'run as' but XP has a Windows 95 option. If a program has to be set to Windows 95 in XP OS, why would one expect it to run as an XP program in Vista. Huh

Also, as Hagar indicates, CFS1 isn't location restrictive as long as the referal string is intact. I have one folder titled "CFS1 WW1" as well as "CFS1 WW2" and "CFS1 Korea;" also an original folder on a different Hard Drive. It's best to start fresh because some add-ons have caused problems with the copy and paste method.



Cool
 
Back to top 
IP Logged
 
Reply #12 - Jun 1st, 2007 at 4:07pm

nils   Offline
Colonel
Loves to shoot things
down.
Westkerke, Belgium

Gender: male
 Posts: 14
 *****
 
ive installed CFS 1, 2 and FS2002 on my new VISTA PC and i have no problems, except with CFS1, where my joystick refuses to respond, and i keep getting strange Joystick messages that dont make any sence  Undecided, the stick works fine with the other sims  Roll Eyes
 
current sims:
FS2004 - FSX
addons: flight deck 4/5, carrier strike force, international fighters, fighter pilot 2,...

FS design Studio 2, FS Repaint V2.23
Back to top 
IP Logged
 
Reply #13 - Jun 2nd, 2007 at 6:33am

H   Offline
Colonel
2003: the year NH couldn't
save face...
NH, USA

Gender: male
 Posts: 6837
 *****
 
nils wrote on Jun 1st, 2007 at 4:07pm:
...my joystick refuses to respond, and i keep getting strange Joystick messages...
When you opt into your CFS1 Settings, is your joystick listed in the control options?
 
Back to top 
IP Logged
 
Reply #14 - Jul 6th, 2007 at 9:28pm

Guppanui   Offline
Colonel
Flyer...

Posts: 153
 *****
 
I am running CFS1 under Vista flawlessly...
first, don't bother with "Compatibility Settings" they will only mess things up...
and then, just mess around to get the joysticks working... It is possible...
I have written lengthy and detailed tutorials on other forums on how to get the joysticks to work for CFS1 in Vista, but it rarely seems to work for anyone else... so the best thing to do is to thrash at it... leave no stone (setting) untried... It took me 3 weeks the first time, but in the end, CFS1 works...
 
Back to top 
IP Logged
 
Pages: 1 2 
Send Topic Print
‹ Previous Topic | Next Topic ›
  « Home ‹ Board Top of this page

Simviation Forum » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge