Search the archive:
YaBB - Yet another Bulletin Board
 
   
 
Page Index Toggle Pages: 1
Send Topic Print
Sunday's cold flight (Read 286 times)
Feb 13th, 2006 at 1:39pm

Censport   Offline
Colonel
Aw, c'mon TC!

Posts: 320
*****
 
Called up the old man yesterday and said "I'm sick of being stuck on the ground. I'm filling up the gas cans on my way over to pick you up."

The winds were calm (3 knots), the ceiling was about 3,300, and the temp was right at 32F. Thankfully, we installed a complete new exhaust this past summer, so at least we could trust the cabin heater.

One thing good about the partnership on this plane, we can afford a hangar. Sure, it would be nice if the airport actually maintained the hangars as you'd expect them to, instead of having to struggle with the doors every time you want to fly, but it does make it easier to prep and pre-flight without getting too cold.

Not the nicest day for flying, but certainly better than being stuck on the ground.
...

We were out along the Cumberland River, our usual route, when we noticed it was snowing to our left. Pretty soon, it was snowing on us!
...

Not our longest flight, but at least we made it up for a while. Here's the field at John C. Tune, in case anybody is handy with GMax or whatever one uses to create scenery. You'll notice there's a lot of birds on the ground and not many hangar doors open. The skies weren't crowded, that's for sure!
...

We took off from runway 2, but the winds changed while we were gone, so we took the downwind on runway 20, which is strictly a right-field pattern.

Dad was flying left-seat, and wanted a touch-and-go before landing, to play in the crosswind. Maybe I'm biased, but he's the best at crosswind landings I've ever seen. Puts a number of instructors I know to shame. Unfortunately, I didn't have my camera ready on the first approach or I could've shown you his "crawl". These pictures are from the second approach, to land, and the winds had eased.
...
...

And here's the old bucket -I mean bird- all tucked in after we taxi'ed back and I topped off the tanks.
...

Thanks for looking, hope you enjoyed the photos!
 
IP Logged
 
Reply #1 - Feb 13th, 2006 at 2:24pm

beaky   Offline
Global Moderator
Uhhhh.... yup!
Newark, NJ USA

Gender: male
Posts: 14187
*****
 
Thanks for the vicarious "fix"... I had to cancel my last planned flight, and will probably have to wait another 2 weeks to go again...  Cry
Pretty cruddy day, there, but at least the vis. was good. That's a nice-looking old straight-tail Cessna, there, BTW. Grin Never really understood the rear windows on the later ones; generally not much use, IMHO.
  Seems like there's something different under the cowling, or is it just the picture...?
 

...
IP Logged
 
Reply #2 - Feb 13th, 2006 at 3:43pm

Censport   Offline
Colonel
Aw, c'mon TC!

Posts: 320
*****
 
Thanks. It's a heap, but there's something gratifying about grabbing some flaps... literally... when setting up the approach.

Actually, it's not that bad a plane but thanks to the partnership, my dad & I work on it more than we fly it. When you've got five different people flying a plane and only two know how to work on it....

Same old Continental under the cowl. Dad still has the Lycoming from our previous 172, a 70's model that was destroyed when a tornado hit our previous home airport. We're saving that in hopes of finding a 150/152 to put it in.

Good luck on getting your fix soon.
 
IP Logged
 
Reply #3 - Feb 13th, 2006 at 8:20pm

beaky   Offline
Global Moderator
Uhhhh.... yup!
Newark, NJ USA

Gender: male
Posts: 14187
*****
 
Quote:
Thanks. It's a heap, but there's something gratifying about grabbing some flaps... literally... when setting up the approach.

Actually, it's not that bad a plane but thanks to the partnership, my dad & I work on it more than we fly it. When you've got five different people flying a plane and only two know how to work on it....

Same old Continental under the cowl. Dad still has the Lycoming from our previous 172, a 70's model that was destroyed when a tornado hit our previous home airport. We're saving that in hopes of finding a 150/152 to put it in.

Good luck on getting your fix soon.


I can't put my finger on it, but there seems to be something different about the appearance of the Conti install vs. the Lycoming (which is more familiar to me). I've never flown a 172 built before '69 or thereabouts, so maybe it just has slightly different lines. Whatever... heap or no, if it's lasted this long, it must be OK... Grin
And yes,manual flaps are a good thing: I'll take a mechanical linkage over an electrical circuit and motor anytime.
You might disagree, but to me, getting to work on the plane I fly would be heaven. I don't mind spending a little more time tinkering than flying: my favorite car so far was my decrepit '76 Fiat; had as much fun skinning my greasy knuckles under the hood as I did driving it..., and I think you can guess which took up more of my time! Grin
   Someday, maybe, I'll have my maintenance cert. and at least a share of an airplane, but it won't be anytime soon.
So no whining... you're envied!!  Wink
 

...
IP Logged
 
Reply #4 - Feb 14th, 2006 at 9:11pm

gottoflynow   Offline
Colonel
I dont know I just like
this pic.

Posts: 738
*****
 
looks like fun Cheesy

-gottoflynow
 

Dell Dimension E520 &&Windows Vista Home Premium&&Intel Core 2 Duo 6300 1.86 GHZ&&2GB of ram&&ATI Radeon X1300 Pro 256MB&&Soundblaster Audigy 24bit Sound Card w/ Surround Sound Speakers  &&160GB HD&&&&
IP Logged
 
Reply #5 - Feb 14th, 2006 at 9:43pm

beefhole   Offline
Colonel
common' yigs!
Philadelphia

Gender: male
Posts: 4466
*****
 
Two weeks Rotty! It's been three and a half months for me Cry (and I NEVER use the cry smiley)

Nice pics... although if I referred to my dad as "the old man," I believe he'd kill me in my sleep. (or, rather, have me killed in my sleep, I forgot he's high on the corporate ladder now, he has people to do that stuff for him)
 
IP Logged
 
Reply #6 - Feb 14th, 2006 at 9:50pm

flyboy 28   Offline
Colonel
Jacksonville, FL

Posts: 13323
*****
 
Quote:
(and I NEVER use the cry smiley)


There's an oxymoron for ya. "Cry smiley". Roll Eyes

Nice shots, Cen. Smiley
 
IP Logged
 
Reply #7 - Feb 15th, 2006 at 11:28am

Censport   Offline
Colonel
Aw, c'mon TC!

Posts: 320
*****
 
Quote:
Nice pics... although if I referred to my dad as "the old man," I believe he'd kill me in my sleep. (or, rather, have me killed in my sleep, I forgot he's high on the corporate ladder now, he has people to do that stuff for him)

My dad's a real "do-it-yourself" kind of guy. Besides, he'll be 70 next month, and he's not in denial about his age. Plus, he knows who'll be looking after him when he can't care for himself, not to mention who will take him flying when he can no longer pass the FAA medical.

And he knows it's a term of endearment. He and his brothers used to their dad as "the old man".
 
IP Logged
 
Reply #8 - Feb 15th, 2006 at 10:30pm

beaky   Offline
Global Moderator
Uhhhh.... yup!
Newark, NJ USA

Gender: male
Posts: 14187
*****
 
Quote:
Two weeks Rotty! It's been three and a half months for me Cry (and I NEVER use the cry smiley)


Boo hoo... poor baby...
I kid, but I feel your pain... imagine getting your PP, flying regularly for a few years, even making a solo voyage of nearly 2400 miles roundtrip, then despite landing a good jobfinding yourself stalled for nearly four years!! I moved away from my flying club, suddenly found my monthly overhead eating into my flying funds, etc., etc....
I could've gone up more than once during that period, but knew I wouldn't be able to keep going, so fell into a sort of despondent state of surrender. It was horrible when I thought about it... but oddly enough, getting FS9 spurred me to try to go for it again. Doing better now, and soon I'll be flying even more often, and probably starting my IFR training.
 

...
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print