Search the archive:
YaBB - Yet another Bulletin Board
 
   
 
Page Index Toggle Pages: 1
Send Topic Print
How to change Weather in CFS2! (Read 318 times)
Jan 18th, 2006 at 10:45am

james007   Offline
Colonel
I love YaBB 1G - SP1!

Posts: 1514
*****
 
If you have wonder how can I change the Weather on a CFS2 mission here are some small tips.

You down load this Weather utility cfo_Weather/CFO. Granted you will have to it by hand but it works like a sharm.

1.http://www.cfsops.com/Modules/cfo_weather/Cfo_Weather_75.htm

I took this tip from Nibbios Web site and I take no credit. How to create Wind in missions this is how.

2.As you may have noticed, the Mission Builder does not allow us to set up full meteorological conditions as well as we can in Free Flight. This is true for wind but I suspect it's also true for turbulence and other variables, even though I have not tested it extensively.
Well, no problem. I have just received a precious tip from Hans Castorp, which I reproduce here:


1) go into free flight
2) open up the advanced weather dialog
3) setup your desired atmospheric conditions
4) fly now (this is necessary to have cfs2 rewrite to the cfs2.cfg file)
5) exit free flight
6) with your text editor, open up cfs2.cfg and under the heading [free flight] copy all of the weather related entries
7) with your text editor, open up the mission file you want to add the weather to and add the section heading [weather] after the first heading in the file; paste in the weather data under this new heading and save.

Hans also suggests:
I have winds set for ground at c2500 (depending on cloud coverage) and aloft at 5000, 10000, 18000, and 24000 with accompanying temperature readings, all taken from http://www.awc-kc.noaa.gov/awc/iff/iffdp.html for real time conditions. Surface gusts are as per whatever METAR report I happen to be using, and shear strength and turbulence are (subjectively) dependent on how stormy it 'feels' (ie i haven't been able to find reported data for these variables yet). Clouds and surface temp/dew point as per METAR in use.

Thank you Hans

Using the same technic you can create snow in your missions as well.


make up your weather in Free Flight and have it rain .. all you have to do to make it snow is go to the cloud.0 line and change the fourth number from the right from 1 to 2

(weather)
visibility.0=24140.16,0.00,2438.40
vis_layers_num=1
cloud.0=9,915.01,1524.00,99.67,2,0,0,1,0.00,3,0
cloud_layers_num=1

Thanks to Beowulf

I hope you appreciate this information.

Enjoy


James007
 
IP Logged
 
Reply #1 - Jan 21st, 2006 at 12:55pm

james007   Offline
Colonel
I love YaBB 1G - SP1!

Posts: 1514
*****
 
You now Guys there is another way you can mimic wind in CFS2. If you go to the Mission Builder. Go to Mission setup,advance Weather. You will see a option call turbulence. It will the give the option of using ,none. mild, modarate or severe.

While not a true wind creator it will mimic wind in a mission to some degree.

It will effect the performance of your plane like wind will .

I hope my information has been helpful


James007
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print