Simviation Forum - nav radio volume control

	Search the archive:

Simviation Main Site | Site Search | Upload Images

Simviation Forum › Old Flight Simulator Series › FS 2002 › nav radio volume control - default a/c

(Moderators: Mitch., Fly2e, ozzy72, beaky, Clipper, JBaymore, Bob70, BigTruck)

‹ Previous Topic | Next Topic ›

Pages: 1

nav radio volume control - default a/c (Read 213 times)

Jan 20^th, 2005 at 3:45pm

dodger Offline
Colonel
Similkameen Valley, BC, Canada

Gender:
Posts: 123

Hi, all. Forgive me for this - it's probably obvious - but I can't change the volume on the nav radio and after a bit the morse code identifier gets annoying. What am I missing here?

AMD 64 X2-5200, NVidia 9600GT 512, 2048 DDR, 2x250 GB SATA, Saitek X45, Win XP SP3 (Win7-64bitRC1 and FSX on 2nd HD)

IP Logged

Reply #1 - Jan 21^st, 2005 at 5:48pm

Wespennest Offline
Colonel
Solvent City
A rather uninteresting cave

Gender:
Posts: 58

To change the radio volume, click on settings and then sounds. You'll be able to fiddle with the volume there.

To turn off the morse code, there should be a button labelled "ID" or "Ident." if it's lit up, or you hear the beeping, click it again and see if the light goes out or you stop hearing the beeping.

hope this helped

IP Logged

Reply #2 - Jan 21^st, 2005 at 8:58pm

dodger Offline
Colonel
Similkameen Valley, BC, Canada

Gender:
Posts: 123

Thanks, W. Understand the general radio vol. settings. I did find the mute control for the ADF today (Control+5) I just checked for the ID or Ident buttons (on the default 172) and they are there for the Nav radios but not for the ADF. so the choice is Control+5 ( mute) or not. Might have been nicer to have it in the background but------ Cheers.

AMD 64 X2-5200, NVidia 9600GT 512, 2048 DDR, 2x250 GB SATA, Saitek X45, Win XP SP3 (Win7-64bitRC1 and FSX on 2nd HD)

IP Logged

Reply #3 - Jan 24^th, 2005 at 6:19am

Poseidon Offline
Colonel
Athens, Hellas

Gender:
Posts: 412

The ID button for the morse code muting should be in the radio stack and near the ADF tuning knob. If not it should in a row of buttons in the bottom of the radio stack with the rest muting buttons (COM1, COM2, NAV1, NAV2). It depends on the radio stack of the airplane you fly.

IP Logged

Reply #4 - Jan 24^th, 2005 at 9:59pm

dodger Offline
Colonel
Similkameen Valley, BC, Canada

Gender:
Posts: 123

Thanks, Poseidon. Finally realized that those are only muting buttons, not on and off controls.

AMD 64 X2-5200, NVidia 9600GT 512, 2048 DDR, 2x250 GB SATA, Saitek X45, Win XP SP3 (Win7-64bitRC1 and FSX on 2nd HD)

IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page