Search the archive:
YaBB - Yet another Bulletin Board
 
   
 
Page Index Toggle Pages: 1
Send Topic Print
Showing Callsign and Flight# (Read 211 times)
Sep 30th, 2004 at 11:36pm

Skittles   Offline
Colonel
N769JC: "Isn't simulating
stimulating?
JAQ: Westover Field, CA (O70)

Gender: male
Posts: 837
*****
 
Hi All,

I'd never seen this come up before, just found out about it and thought I would share.

I've always used the AI Aircraft Labels so I could actually find the traffic, but was discouraged when I had three aircraft at my Two o'clock Five miles and didn't know which one ATC was refering to.

I found out I could have the label show the aircraft Callsign AND Flight#.

Using the following FS9.CFG lines, your aircraft labels will display the aircraft Callsign and Flight number, Heading, Speed, Distance & Altitude.

[font=Courier][size=16][color=black]
[AContain]
ShowLabels=1
ShowUserLabel=0
ShowLabelManufacturer=0
ShowLabelModel=0
ShowLabelTailNumber=0
ShowLabelDistance=1
ShowLabelAltitude=1
ShowLabelAirline=0
ShowLabelAirlineAndFlightNumber=1
ShowLabelFlightPlan=0
ShowLabelContainerId=0
ShowLabelAirspeed=1
ShowLabelHeading=1
LabelDelay=1000
LabelColor=FFFF0000[/color][/size][/font]

Happy Simming,

Joe
 

What do computers and air conditioners have in common?...
They both will work perfectly, until you open windows.
IP Logged
 
Reply #1 - Oct 1st, 2004 at 1:36am

BFMF   Offline
Colonel
Pacific Northwest

Gender: male
Posts: 19820
*****
 
A much more easier way to do it is while flying to go into the menu > Options > Settings > Traffic, and select the options you want to show.

Simple Innit? Grin
 
IP Logged
 
Reply #2 - Oct 2nd, 2004 at 12:18am

Skittles   Offline
Colonel
N769JC: "Isn't simulating
stimulating?
JAQ: Westover Field, CA (O70)

Gender: male
Posts: 837
*****
 
Quote:
A much more easier way to do it is while flying to go into the menu > Options > Settings > Traffic, and select the options you want to show.

Simple Innit? Grin

Well, on my install, FS does not list the Callsign & Flight# Tongue Grin
 

What do computers and air conditioners have in common?...
They both will work perfectly, until you open windows.
IP Logged
 
Reply #3 - Oct 2nd, 2004 at 2:32am

Travis   Offline
Colonel
Cannot find REALITY.SYS.
Universe halted.
Dripping Springs, TX

Gender: male
Posts: 4515
*****
 
Quote:
Well, on my install, FS does not list the Callsign & Flight# Tongue Grin


Really?  I just bought ACOF and it listed all of the possible labelling for the AI on the ATC screen . . . ???
 

...
IP Logged
 
Reply #4 - Oct 2nd, 2004 at 5:12am

Politically Incorrect   Offline
Colonel
Personal opinion given
free of charge!
Williamsport, PA

Gender: male
Posts: 3915
*****
 
Seems Skittles and I are a lot alike, always do things the hard way Wink Grin
 
IP Logged
 
Reply #5 - Oct 2nd, 2004 at 6:29am

Skittles   Offline
Colonel
N769JC: "Isn't simulating
stimulating?
JAQ: Westover Field, CA (O70)

Gender: male
Posts: 837
*****
 
Quote:
Really?  I just bought ACOF and it listed all of the possible labelling for the AI on the ATC screen . . . ???

Makes me wonder if MS is distributing slightly newer versions?
 

What do computers and air conditioners have in common?...
They both will work perfectly, until you open windows.
IP Logged
 
Reply #6 - Oct 3rd, 2004 at 12:22am

Jared   Offline
Colonel
I'd rather be flying...
Uniontown, Ohio

Gender: male
Posts: 12621
*****
 
I doubt it, I had ACOF delivered to my door the day it came out via the internet ad I too have the option...

Alt, O, E, T should get you there...Smiley

I have usually flown without them, but just recently turned them back on to keep on eye on my new AI traffic that I added at Kent State (Yes school airplanes at the school airport!) as well as some additional PAI files that I downloaded recently..Smiley
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print