Search the archive:
YaBB - Yet another Bulletin Board
 
   
 
Page Index Toggle Pages: 1
Send Topic Print
A .cfg that doesn't want to be adjusted? (Read 183 times)
Sep 30th, 2004 at 8:00am

Staiduk   Offline
Colonel

Posts: 1040
*****
 
Hello!

I've got a lovely jet; it's got a couple points I'd like to 'tweak' a bit. Wink

Just one problem: it appears to be untweakable. IOW;I make an adjustment to the .cfg; no effect at all on the aircraft's performance.
(To be exact; I'm upping the Vne a bit.)
Anyone know a) why it doesn't adjust as desired and b) how to make the adjustment? Smiley
Thanks. Smiley
 

...
IP Logged
 
Reply #1 - Sep 30th, 2004 at 8:55am

garymbuska   Offline
Colonel
I would rather be flying
Jacksonville, Florida

Gender: male
Posts: 2850
*****
 
Are you making the adjustment while FS is loaded? If so then you have to reload the plane in order to see any effect as FS is still using the old file. If you are editing out of FS make sure you are adjusting the right value.
I do not know that much about the Vne you may have to use negative numbers to get the desired effect. Roll Eyes
 
IP Logged
 
Reply #2 - Sep 30th, 2004 at 9:08am

Staiduk   Offline
Colonel

Posts: 1040
*****
 
Hi Gary. Smiley
Yes; I'm reloading the plane each time. Smiley
I'm an old hand at adjusting .cfg's; this one is simply not responding. I'm starting to wonder if it's possible to set the max speed in the model itself - it's the only thing I can think of at the moment. Smiley
 

...
IP Logged
 
Reply #3 - Sep 30th, 2004 at 9:14am

Felix/FFDS   Offline
Admin
FINALLY an official Granddad!
Orlando, FL

Gender: male
Posts: 1000000627
*****
 
Quote:
Hi Gary. Smiley
Yes; I'm reloading the plane each time. Smiley
I'm an old hand at adjusting .cfg's; this one is simply not responding. I'm starting to wonder if it's possible to set the max speed in the model itself - it's the only thing I can think of at the moment. Smiley


No - the visual model has no effect on flight dynamics. 

Out of curiosity, you may want to change it (if you can) in the *.air file and see if the change transfers to the aircraft.cfg file when you reload.

 

Felix/FFDS...
IP Logged
 
Reply #4 - Sep 30th, 2004 at 9:24am

Gixer   Offline
Colonel
Lets go fly a kite!!

Posts: 1540
*****
 
StaidUk, I am unsure if this is anything to do with it but worth a try.

Under the [General] bit in the *.cfg there is the following line:

editable=0

Maybe if this is set to 1 it wont allow you to edit it?  Total guess but worth a try.

To raise the speed that the overspeed warning comes on at change this line:

max_indicated_speed = ***

If you physically want to increase the power of the plane try changing this one a bit

[jet_engine]
thrust_scalar = 1.0

up it to 1.5.  I havn't tweaked jets yet so am unsre how it will respond totally.


 

AMD64 3500+ @ 2200MHz 400FSB&&MSI K8N Neo 2 mobo nForce3 chipset&&1gig Corsair XMS PC3200 timings @ 10.2.2.2 &&XFX 6800 Ultra @ 450/1200&&80gig HDD&&Loadsa fans!!!
IP Logged
 
Reply #5 - Sep 30th, 2004 at 11:00am

Staiduk   Offline
Colonel

Posts: 1040
*****
 
Hi Gixer; yes; the Max indicated airspeed was what I'm trying to adjust. (Not Vne; sorry 'bout that - that's what happens when you post at 4 in the morning. Roll Eyes )

That 'editable' line doesn't seem to do much either. Sad

I've been working all night with it. New info - everything else adjusts - the power scalar etc. changes; but the one thing I need tweaked - the max indicated speed - doesn't. (Figures.)

The aircraft in question is the PM2 Concorde - I'm trying to get Mach 3 out of her. It's easy enough to set everything else;  except that one value.

Smiley
 

...
IP Logged
 
Reply #6 - Sep 30th, 2004 at 11:05am

Staiduk   Offline
Colonel

Posts: 1040
*****
 
Quote:
No - the visual model has no effect on flight dynamics.  

Out of curiosity, you may want to change it (if you can) in the *.air file and see if the change transfers to the aircraft.cfg file when you reload.



Hi Felix; that's what I've always assumed as well; (i.e. the model) but I've gone over every character of the .cfg file and nothing's to be had - not knowing nuthin' about modelling; it was an idea. Wink
There's no entry that I can find for max indicated airspeed in the .air file either; or at least that I've been able to identify. I'm wondering if that .air file builder they have at AvHistory might help - plug the plane's file into it and see what it says. Worth a shot anyway. Grin
Thanks!
 

...
IP Logged
 
Reply #7 - Sep 30th, 2004 at 12:00pm

Gixer   Offline
Colonel
Lets go fly a kite!!

Posts: 1540
*****
 
There is a bit in the *.air file.  Its under Flight Dynamics.  3rd one down Vmo=***   Maybe this is the max speed at which the max speed in the *.cfg can be set?

Another total gues though lol.  Cant see anything else that sticks out to do with speed.
 

AMD64 3500+ @ 2200MHz 400FSB&&MSI K8N Neo 2 mobo nForce3 chipset&&1gig Corsair XMS PC3200 timings @ 10.2.2.2 &&XFX 6800 Ultra @ 450/1200&&80gig HDD&&Loadsa fans!!!
IP Logged
 
Reply #8 - Sep 30th, 2004 at 12:04pm

Gixer   Offline
Colonel
Lets go fly a kite!!

Posts: 1540
*****
 
Scrap that idea I can change the 747 so it maxes at 1000 KIAS indicated  Sad
 

AMD64 3500+ @ 2200MHz 400FSB&&MSI K8N Neo 2 mobo nForce3 chipset&&1gig Corsair XMS PC3200 timings @ 10.2.2.2 &&XFX 6800 Ultra @ 450/1200&&80gig HDD&&Loadsa fans!!!
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print