Search the archive:
YaBB - Yet another Bulletin Board
 
   
 
Page Index Toggle Pages: 1
Send Topic Print
Sinking Feeling (Read 328 times)
Sep 30th, 2004 at 6:57am

crocker   Offline
Colonel
I love YaBB 1G - SP1!

Posts: 131
*****
 
I've just downloaded an AI aircraft but the  undercarriage, nose and main wheels have sunk into the tarmac (more nose than main). I know there's a aircraft cfg modification/adjustment you can make to solve the problem but can I find it, can I hell as like!
Any one help please to point me to a 'tip' or time served engineer?
Thanks guys.
 
IP Logged
 
Reply #1 - Sep 30th, 2004 at 8:00am

thebadman   Offline
1st Lieutenant
I love YaBB 1G - SP1!

Posts: 2
****
 
crocker

This has come up a few times in Flightsim.com firums.  Have you tried there?
 
IP Logged
 
Reply #2 - Sep 30th, 2004 at 8:03am

commoner   Offline
Colonel
Common is, as common does
Yorkshire. England. UK.

Gender: male
Posts: 3238
*****
 
There's a post on page three of this forum.......have a butchers there. Wink
 

..."In theory, there is no difference between theory and practice. But, in practice, there is."
IP Logged
 
Reply #3 - Sep 30th, 2004 at 8:50am

garymbuska   Offline
Colonel
I would rather be flying
Jacksonville, Florida

Gender: male
Posts: 2850
*****
 
You need to adjust the contact points. They can be found in the aircraft cfg file. There is a post here as to what all the numbers stand for and the order that they are listed. It is a easy fix once you find out which points to edit. 8)
 
IP Logged
 
Reply #4 - Sep 30th, 2004 at 10:05pm

elkinallen   Offline
Colonel
I love YaBB 1G - SP1!

Posts: 26
*****
 
I have been working on this as well.  My plane was sunken all the way to the top of the tires. I adjusted it to where the wheels were not even touching the surface!! I kept messing with it until I got it where I wanted it.
At one point, The nose wheel would not come down to the surface. I replaced the entire contact point with one from another aircraft. . It did it.

If anyone knows the specific values of the numbers, I love to know!!!!
 
IP Logged
 
Reply #5 - Oct 1st, 2004 at 5:54am

elkinallen   Offline
Colonel
I love YaBB 1G - SP1!

Posts: 26
*****
 
Well I figured it out.  All those numbers in the contact info? Well, they are all the numbers that define each individual gear and maybe even wheell, oleo and ground contact.  Changing the nubers is like putting air in the tires or nitrogen in the struts.  I was able to tune the suspension where the plane sways and rocks back and forth. The center gear on the 747 were not smoking on touchdown, now they are.
 
IP Logged
 
Reply #6 - Oct 1st, 2004 at 6:53am

crocker   Offline
Colonel
I love YaBB 1G - SP1!

Posts: 131
*****
 
Thanks everyone for your suggestions. I've played around with the contact points but I still can't get this bird out of the tarmac.
Apparently the three key points for the landing gear in the cfg file are 1,2 &3. eg Point1=n, x.xx,y.yy,z.zz etc etc. It seems that it is the y.yy values which effect the landing gear. (not my solution). By increasing the negative value it should raise the aircraft. (Like putting air in the tyres etc!). This particular aircraft I downloaded has the same contact points as the default Lear. No problem with the latter, it sits just perfectly.
 
IP Logged
 
Reply #7 - Oct 1st, 2004 at 7:07am

dave3cu   Offline
Colonel
Procrastinate now, don't
put it off.
3CU, Northern Wisconsin, USA

Gender: male
Posts: 3077
*****
 
Look at th aircraft.cfg of any default a/c. Just above the [contact_points] is a commented section that defines all the parameters.

For more detail on the aircraft.cfg file and other components that make up an a/c the 'aircraft container sdk' may be useful.

http://www.microsoft.com/games/flightsimulator/fs2004_downloads_sdk.asp


Note: After adjusting your contact points you may have to tweak 'static_pitch' and static_cg_height'.  These control how the a/c is initially drawn at rest. If off, the a/c might initally appear out wack but will settle onto the proper contact points when first moved.

Cheers,
Dave
 

At that time [1909] the chief engineer was almost always the chief test pilot as well. That had the fortunate result of eliminating poor engineering early in aviation.          Igor Sikorsky

I intend to live forever....so far, so good.         Steven Wright

You know....you can just rip up a to-do list.
IP Logged
 
Reply #8 - Oct 2nd, 2004 at 1:50am

elkinallen   Offline
Colonel
I love YaBB 1G - SP1!

Posts: 26
*****
 
Right!
One of my 747's has 1 contact point for every tire.  I choose about 4 numbers in each line to raise or lower and it takes affect.  Once the aircraft was leaning to the left as if the oleos and tires were flat.  I  'air'd them up' and all was fine.  Don't think that it doesn't takes trial and error.

One 747 only had 6 total contact points.  The result was that the body gear was not smoking on touchdown. I added the contact points and all is well.  

I found the best effect is when the aircraft sits on the ground and it appears as if the tires are somewhat flat. This gives the aircraft GREAT ground handling dynamics.  Swaying and leaning on the nose wheel when braking, and rocking when taking off, releasing the brakes.

Go get'm.

Jeff
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print