Search the archive:
YaBB - Yet another Bulletin Board
 
   
 
Page Index Toggle Pages: 1
Send Topic Print
How do I correct this...Help Please (Read 419 times)
Sep 29th, 2004 at 10:07pm

stevewilson   Offline
Colonel
Wish I had my pic here!
Hanford, Ca.

Gender: male
Posts: 445
*****
 
Can someone help me correct an error I keep getting. "ModName: ntdll.dll", I get this when I try to exit FS9.

It happens mostly after I have AI's at my AFCAD airport.

Steve
 

Steve&&&&CPU: Intel Pentium 4 519 3.06 GHz &&Memory: 512MB (256MBx2) DDR PC3200 (400MHz) DIMM &&Intel Graphics Media Accelerator 900 Graphics&&Motherboard: Intel Augsburg &&SATA 8MB Cache 160GB 7200 &&CD R/W ROM, DVD-R/RW&&1 CPU FAN, 1 ANTEC FAN&&300 W PSU, WITH FAN &&FS9/2002&&...
IP Logged
 
Reply #1 - Sep 30th, 2004 at 4:47am

ozzy72   Offline
Global Moderator
Pretty scary huh?
Madsville

Gender: male
Posts: 37122
*****
 
Sounds like a corrupted file to me. Try replacing it with the original from your FS CDs and see if that corrects it Wink
 

...
There are two types of aeroplane, Spitfires and everything else that wishes it was a Spitfire!
IP Logged
 
Reply #2 - Sep 30th, 2004 at 5:53am

stevewilson   Offline
Colonel
Wish I had my pic here!
Hanford, Ca.

Gender: male
Posts: 445
*****
 
I looked for it, but couldn't find it. So instead of a compleat reinstall I restored back to a time that I didn't have this problem. BIG mistake, somehow all of my aircraft config files for only my AI aircraft got deleted.
 

Steve&&&&CPU: Intel Pentium 4 519 3.06 GHz &&Memory: 512MB (256MBx2) DDR PC3200 (400MHz) DIMM &&Intel Graphics Media Accelerator 900 Graphics&&Motherboard: Intel Augsburg &&SATA 8MB Cache 160GB 7200 &&CD R/W ROM, DVD-R/RW&&1 CPU FAN, 1 ANTEC FAN&&300 W PSU, WITH FAN &&FS9/2002&&...
IP Logged
 
Reply #3 - Sep 30th, 2004 at 8:27am

dave3cu   Offline
Colonel
Procrastinate now, don't
put it off.
3CU, Northern Wisconsin, USA

Gender: male
Posts: 3077
*****
 
Steve,

From a Google for ntdll.dll I found this preliminary info.

This is a  know problem, not specific to FS9. 'ntdll.dll' is an XP file. The problem occurs when some Windows updates or some 3rd party software update or replace the file with newer/different versions. 

Dont know of an easy fix yet.  It apparently involves rolling back to a 'good' version. I'll do a check of the Microsoft Knowledge Base when I get a chance, to see if they have a fix.

Cheers,
Dave
 

At that time [1909] the chief engineer was almost always the chief test pilot as well. That had the fortunate result of eliminating poor engineering early in aviation.          Igor Sikorsky

I intend to live forever....so far, so good.         Steven Wright

You know....you can just rip up a to-do list.
IP Logged
 
Reply #4 - Sep 30th, 2004 at 2:04pm

stevewilson   Offline
Colonel
Wish I had my pic here!
Hanford, Ca.

Gender: male
Posts: 445
*****
 
Thanks Dave:

That really explanes it as might have started right after I installed the SPS 2 update.

I did a system restore and that appears to have corrected the problem, however this for some strange reason wiped out my aircraft.cfg files in all my AI folders, including my backup files on a seperate hd.

Steve
 

Steve&&&&CPU: Intel Pentium 4 519 3.06 GHz &&Memory: 512MB (256MBx2) DDR PC3200 (400MHz) DIMM &&Intel Graphics Media Accelerator 900 Graphics&&Motherboard: Intel Augsburg &&SATA 8MB Cache 160GB 7200 &&CD R/W ROM, DVD-R/RW&&1 CPU FAN, 1 ANTEC FAN&&300 W PSU, WITH FAN &&FS9/2002&&...
IP Logged
 
Reply #5 - Sep 30th, 2004 at 3:05pm

Hagar   Offline
Colonel
My Spitfire Girl
Costa Geriatrica

Posts: 33159
*****
 
Just a thought Steve. This might save a lot of messing around. If you can reverse the System Restore, save backup copies of those CFG files & any other files you lost to a remote drive, a CD or even a floppy. Then go back to before you installed the update. It's only a guess but I think it's worth a try.
 

...

Founder & Sole Member - Grumpy's Over the Hill Club for Veteran Virtual Aviators
Member of the Fox Four Group

Need help? Try Grumpy's Lair

My photo gallery
IP Logged
 
Reply #6 - Sep 30th, 2004 at 4:05pm

stevewilson   Offline
Colonel
Wish I had my pic here!
Hanford, Ca.

Gender: male
Posts: 445
*****
 
Hager: we are thinking along the same lines, however it will have to be to a cd because I had already copied the intire FS9 folder to a seperate HD, and even those files have missing config files.

SPS 2 is really becoming a pain in the a$$ Angry
 

Steve&&&&CPU: Intel Pentium 4 519 3.06 GHz &&Memory: 512MB (256MBx2) DDR PC3200 (400MHz) DIMM &&Intel Graphics Media Accelerator 900 Graphics&&Motherboard: Intel Augsburg &&SATA 8MB Cache 160GB 7200 &&CD R/W ROM, DVD-R/RW&&1 CPU FAN, 1 ANTEC FAN&&300 W PSU, WITH FAN &&FS9/2002&&...
IP Logged
 
Reply #7 - Oct 1st, 2004 at 9:52am

Ivan   Offline
Colonel
No, I'm NOT Russian, I
only like Russian aircraft
The netherlands

Gender: male
Posts: 6058
*****
 
DLL mess...

There's a security problem with that one on Win2000/2003 IIS server, probably got the wrong version.


System restore can be switched off for specific drives

I have a dutch version of the file... probably won't work on your machine, but i think it's possible to get the file from a slipstreamed XP with SP2 setup CD
 

Russian planes: IL-76 (all standard length ones),  Tu-154 and Il-62, Tu-134 and An-24RV&&&&AI flightplans and repaints can be found here
IP Logged
 
Reply #8 - Oct 3rd, 2004 at 5:03am

stevewilson   Offline
Colonel
Wish I had my pic here!
Hanford, Ca.

Gender: male
Posts: 445
*****
 
Ivan, I didn't d/l SPS 2, I ordered it on a cd from M$. With several computers in the house it made more sence to have the cd.

But I dont think I'll be installing it on any machine.

Steve
 

Steve&&&&CPU: Intel Pentium 4 519 3.06 GHz &&Memory: 512MB (256MBx2) DDR PC3200 (400MHz) DIMM &&Intel Graphics Media Accelerator 900 Graphics&&Motherboard: Intel Augsburg &&SATA 8MB Cache 160GB 7200 &&CD R/W ROM, DVD-R/RW&&1 CPU FAN, 1 ANTEC FAN&&300 W PSU, WITH FAN &&FS9/2002&&...
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print