Search the archive:
YaBB - Yet another Bulletin Board
 
   
 
Page Index Toggle Pages: 1
Send Topic Print
Pitch settings not holding (Read 231 times)
Sep 26th, 2004 at 8:53pm

stevewilson   Offline
Colonel
Wish I had my pic here!
Hanford, Ca.

Gender: male
Posts: 445
*****
 
If it not one thing its another Wink

I'm using the Saitek X45 joy stick and I have the elevator pitch , down/up, assigned to buttons 2 & 3 respectivly.

The problem is that after I set the pitch for level flight if I touch the joy stick to turn I lose the pitch settings.

Has anyone had this problem and how to correct it?
 

Steve&&&&CPU: Intel Pentium 4 519 3.06 GHz &&Memory: 512MB (256MBx2) DDR PC3200 (400MHz) DIMM &&Intel Graphics Media Accelerator 900 Graphics&&Motherboard: Intel Augsburg &&SATA 8MB Cache 160GB 7200 &&CD R/W ROM, DVD-R/RW&&1 CPU FAN, 1 ANTEC FAN&&300 W PSU, WITH FAN &&FS9/2002&&...
IP Logged
 
Reply #1 - Sep 26th, 2004 at 9:15pm

jordonj   Offline
Colonel
Loose my license...WHAT
license?!
Michigan

Gender: male
Posts: 5601
*****
 
I have the Pitch assigned to the hat (the one other than the one other than the one that has you look around in the VC).

Does the pitch trim indicator change...the wind in the game will make a difference!
 

My first flight in a 172 on August 20, 2004&&...&&&&Doing the right thing is more important than doing the thing right. (P. Drucker) &&&&When all think alike, then no one is thinking. (Walter Lippmann)&&&&Boredom's the problem. And how do you beat Boredom? Adventure!!!&&&&Tyler: You-You'll remember my position, won't you?&&&&Rosie: Sure! Stop by for a drink sometime!&&&&Tyler: Wait! Wait! What is my position?&&&&Rosie: Ehhhh...beats the hell outta me! I just hope I can find my way back home!
IP Logged
 
Reply #2 - Sep 26th, 2004 at 9:53pm

JBaymore   Offline
Global Moderator
Under the curse of the
hombuilt cockpit!

Gender: male
Posts: 10261
*****
 
If the AP is engaged... it can alter your trim settings right back as soon as you try to change them.

best,

...............john
 

... ...Intel i7 960 quad 3.2G LGA 1366, Asus P6X58D Premium, 750W Corsair, 6 gig 1600 DDR3, Spinpoint 1TB 7200 HD, Caviar 500G 7200 HD, GTX275 1280M,  Logitec Z640, Win7 Pro 64b, CH Products yoke, pedals + throttle quad, simpit
IP Logged
 
Reply #3 - Sep 26th, 2004 at 10:16pm

stevewilson   Offline
Colonel
Wish I had my pic here!
Hanford, Ca.

Gender: male
Posts: 445
*****
 
jordonj: Some of the AC don't have a pitch control and those that do I haven't noticed if it moves back to center.

John: AP is not engaged.

This is happening on all ACs, And very little to no wind.
 

Steve&&&&CPU: Intel Pentium 4 519 3.06 GHz &&Memory: 512MB (256MBx2) DDR PC3200 (400MHz) DIMM &&Intel Graphics Media Accelerator 900 Graphics&&Motherboard: Intel Augsburg &&SATA 8MB Cache 160GB 7200 &&CD R/W ROM, DVD-R/RW&&1 CPU FAN, 1 ANTEC FAN&&300 W PSU, WITH FAN &&FS9/2002&&...
IP Logged
 
Reply #4 - Sep 27th, 2004 at 12:07am

dave3cu   Offline
Colonel
Procrastinate now, don't
put it off.
3CU, Northern Wisconsin, USA

Gender: male
Posts: 3077
*****
 
Steve

Sounds like maybe you made assignments for the 'pitch down (elevator)' and 'pitch up (elevator)' which is the actual elevator control which are normally assigned to num8 and num2, and the joystick y axis.

For 'elevator  trim', as in trim for level flight, make assignments to 'elevator trim up' and 'elevator trim down' in the assignments.

Cheers,
Dave



 

At that time [1909] the chief engineer was almost always the chief test pilot as well. That had the fortunate result of eliminating poor engineering early in aviation.          Igor Sikorsky

I intend to live forever....so far, so good.         Steven Wright

You know....you can just rip up a to-do list.
IP Logged
 
Reply #5 - Sep 27th, 2004 at 2:51am

stevewilson   Offline
Colonel
Wish I had my pic here!
Hanford, Ca.

Gender: male
Posts: 445
*****
 
Dave that is what I had done. Changed it to elevator trim and it works much better.

The funny thing is that in the cessna when I now work the trim buttons, the pitch wheel on the panel moves, it didn't move when I had the buttons assinged to the pitch control. ???

Thanks guys for your help.

Steve
 

Steve&&&&CPU: Intel Pentium 4 519 3.06 GHz &&Memory: 512MB (256MBx2) DDR PC3200 (400MHz) DIMM &&Intel Graphics Media Accelerator 900 Graphics&&Motherboard: Intel Augsburg &&SATA 8MB Cache 160GB 7200 &&CD R/W ROM, DVD-R/RW&&1 CPU FAN, 1 ANTEC FAN&&300 W PSU, WITH FAN &&FS9/2002&&...
IP Logged
 
Reply #6 - Sep 27th, 2004 at 9:16pm

dodger   Offline
Colonel
Similkameen Valley, BC, Canada

Gender: male
Posts: 123
*****
 
Steve, FYI I have the #3 hat (on the X45 throttle) assigned to pitch and aileron trim functions, mainly 'cause I'm not wiggling that hand much and figured I would have less chance of inadvertent actions. Of course you probably have other priorities for that hat - which is why we have an X45, right?
 

AMD 64 X2-5200, NVidia 9600GT 512, 2048 DDR, 2x250 GB SATA, Saitek X45, Win XP SP3 (Win7-64bitRC1 and FSX on 2nd HD)
IP Logged
 
Reply #7 - Sep 28th, 2004 at 1:27am

stevewilson   Offline
Colonel
Wish I had my pic here!
Hanford, Ca.

Gender: male
Posts: 445
*****
 
Dodger:  Used to have something assigned to that hat switch, but removed it cause I tend to rest my finger on it. Some of the other settings that I have are:

Fire Button D= flaps down in stages

mouse cursor control= view forward / backward

mouse fire button= flaps up in stages

pinkie switch= speed break

Just to name a few.

Have you been able to figure out how to use the AUX., and Mode 1 switchs?

Steve
 

Steve&&&&CPU: Intel Pentium 4 519 3.06 GHz &&Memory: 512MB (256MBx2) DDR PC3200 (400MHz) DIMM &&Intel Graphics Media Accelerator 900 Graphics&&Motherboard: Intel Augsburg &&SATA 8MB Cache 160GB 7200 &&CD R/W ROM, DVD-R/RW&&1 CPU FAN, 1 ANTEC FAN&&300 W PSU, WITH FAN &&FS9/2002&&...
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print