Search the archive:
YaBB - Yet another Bulletin Board
 
   
 
Page Index Toggle Pages: 1
Send Topic Print
Hard Right! (Read 208 times)
Sep 22nd, 2004 at 9:24am

pmartin27   Offline
Captain
I love YaBB 1G - SP1!

Posts: 3
***
 
I have a problem with FS9 that has me pulling my hair out. When applying power with any aircraft at any airport the AC immediately turns hard right heading off the runway. I can compensate by hard rudder left, but I don't want to fly this way. Uninstalled FS9 completely (inluding saved files and registry entry) 3 times, but the same problem is coming back to haunt me. Checked the Joystick by first disabling then checking the settings which appear to be fine. I suspect that there must be other file(s) that are not deleted when unistalling or possibly a hardware problem. This is the first problem I have encountered that has me stumped. Any help will be greatly appreciated.

Pete
 
IP Logged
 
Reply #1 - Sep 22nd, 2004 at 10:48am

codered   Offline
Colonel
Flight Plan Closed?

Posts: 1622
*****
 
All prop aircraft have tourque.  This is cause by the propellers spinning one direction, making the aircraft want to turn the opposite way.  Also, single aircraft suffer from the air being pulled through the propeller and cork screwing around the fuselage and hitting the tail.  This also causes pulling to one direction.  Then if you add in crosswind you might have a severe pull.

Anyway, in real life you have to combat this by using opposite rudder to help keep your centerline.  Now perhaps in FS this is modeled too well and causing it to seem severe.  You can either edit the aircraft files, turn down the realism settings, or just use the full rudder to keep the centerline. Grin
 

Windows XP SP1&&Motherboard: Epox 8RDA + main board&&Processor: AMD XP2500 Barton CPU&&Memory: PC2700 1gb Geil DDR&&Hard Drive: SEA HDD IDE 40GB 7M 40GPP&&Hard Drive: Western Digital 40gb 8mb cache&&Monitor 15 LCD Flat Panel Display (15 viewable)&&Video Card: ATI Radeon 9500 Pro&&Sound Card: Creative Labs Audigy 2
IP Logged
 
Reply #2 - Sep 22nd, 2004 at 11:22am
Graycat8524   Ex Member

 
Heya PMartin,

Two more things to check:

1.)  Before taxiing, disengage the Num Lock on the keyboard (if you have it locked "on") and press the number "5" on the numberpad.  Re-engage the Num Lock.  What this does is to "center" the rudder and elevator trim settings.

2.)  Again before taxiing go up to the FS 2004 Main Menu.  Click on Options > Controls > then Disable the joystick.  Exit FS 2004.  Next go to the Control Panel > Game Controllers and Re-Calibrate your joystick.  Once you have re-calibrated open FS 2004 again, click on Options > Controls > then Enable the joystick.

For some odd reason the controller settings get "stuck" and you have to clear them to keep the FS 2004 from "hard steering" your aircraft.

One final thought -- if you are using Windows XP, are you current on all of your updates?  The reason why I ask is because I have had very few problems with FS 2004 since installing SP2.
 
IP Logged
 
Reply #3 - Sep 22nd, 2004 at 5:08pm

beefhole   Offline
Colonel
common' yigs!
Philadelphia

Gender: male
Posts: 4466
*****
 
Not to be nitpicky or anything, but its not torque or p-factor.  That pulls your plane to the left, not the right.  What kind of joystick do you have?  Logitech has a LOOONG history of chronic problems using their joysticks in FS.  Try disabling autorudder, calibrating it about a million times, and try a takeoff using only the keyboard, with the joystick disabled.  If it still swings to the right, then its not a joystick problem.  If everything is fine, then you have yourself one very logitech-ish joystick.
 
IP Logged
 
Reply #4 - Sep 22nd, 2004 at 6:08pm

Politically Incorrect   Offline
Colonel
Personal opinion given
free of charge!
Williamsport, PA

Gender: male
Posts: 3915
*****
 
Quote:
Not to be nitpicky or anything, but its not torque or p-factor.  That pulls your plane to the left, not the right. 


Not necessarily true, there are aircraft that the prop spins opposite!
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print