Search the archive:
YaBB - Yet another Bulletin Board
 
   
 
Pages: 1 2 
Send Topic Print
Corsair takeoff swing! (Read 854 times)
Reply #15 - Sep 24th, 2004 at 7:36am

Staiduk   Offline
Colonel

Posts: 1040
*****
 
Beautiful as it is (and it is very beautiful!); this Corsair is rapidly turning into the Rod Serling topic of the week here. Cheesy
Seems there are three factions: one that experiences no torque; one that experiences powerful torque; one that experiences so much torque the bird does a pretty fair Starsky and Hutch inpression the moment you apply the least bit of throttle. That's the camp I belong to, unfortunately.

All from the same plane. Very, very odd. (I'm assuming that people in all 3 camps are using full settings. If not everyone; then enough to establish a baseline.)

I looked at the .cfg and found the torque and P-factor was set to 4; or 4 times normal. I twiddled with my own copy of the plane and found that reducing these two stats to 1.5 makes for an acceptable compromise; making the aircraft pretty tough to get off the ground; but possible.

I really really hate to screw with another person's fine work; but my copy of the Corsair was simply unflyable - or at least un-takeoff-able. Roll Eyes

If you're in that 3rd camp, fly at 100% and are looking for a fix; I suggest making the mentioned adjustments - it might solve your problem. Smiley
 

...
IP Logged
 
Reply #16 - Sep 27th, 2004 at 8:12pm

dodger   Offline
Colonel
Similkameen Valley, BC, Canada

Gender: male
Posts: 123
*****
 
Staiduk, that IS the fix!! I re-set to a 2, and it is now controllable. (Not EASY mind you!) Many thanks!!  Grin Grin
 

AMD 64 X2-5200, NVidia 9600GT 512, 2048 DDR, 2x250 GB SATA, Saitek X45, Win XP SP3 (Win7-64bitRC1 and FSX on 2nd HD)
IP Logged
 
Reply #17 - Sep 30th, 2004 at 12:43pm

ex5yy   Offline
Major
I love YaBB 1G - SP1!
France

Gender: female
Posts: 4
*****
 
Hello
The corrective for Corsair F4u-7 is now available in the section Vintage.
This patch corrects the problems of takeoff of Corsair F4U-7 and a new flight dynamic. Also adds a new 3D model Corsair AU-1 with two new textures and supplementary possibilities for repainters.

Regards
ex5yy
Guy HULIN
 

ex5yy&&HULIN Guy&&&&...
IP Logged
 
Reply #18 - Sep 30th, 2004 at 4:09pm

stevewilson   Offline
Colonel
Wish I had my pic here!
Hanford, Ca.

Gender: male
Posts: 445
*****
 
Hay Guy, ex5yy sure sounds formilur to me. G4ZGY now KF7SG do these ring a bell?

Steve
 

Steve&&&&CPU: Intel Pentium 4 519 3.06 GHz &&Memory: 512MB (256MBx2) DDR PC3200 (400MHz) DIMM &&Intel Graphics Media Accelerator 900 Graphics&&Motherboard: Intel Augsburg &&SATA 8MB Cache 160GB 7200 &&CD R/W ROM, DVD-R/RW&&1 CPU FAN, 1 ANTEC FAN&&300 W PSU, WITH FAN &&FS9/2002&&...
IP Logged
 
Reply #19 - Sep 30th, 2004 at 4:32pm

stevewilson   Offline
Colonel
Wish I had my pic here!
Hanford, Ca.

Gender: male
Posts: 445
*****
 
Just d/l the update and it is nice. No need for autorudder, and even the breaks seem to be better.

Now if I can just keep the engine running when I start up with it.

Steve
 

Steve&&&&CPU: Intel Pentium 4 519 3.06 GHz &&Memory: 512MB (256MBx2) DDR PC3200 (400MHz) DIMM &&Intel Graphics Media Accelerator 900 Graphics&&Motherboard: Intel Augsburg &&SATA 8MB Cache 160GB 7200 &&CD R/W ROM, DVD-R/RW&&1 CPU FAN, 1 ANTEC FAN&&300 W PSU, WITH FAN &&FS9/2002&&...
IP Logged
 
Reply #20 - Oct 3rd, 2004 at 1:15am

dodger   Offline
Colonel
Similkameen Valley, BC, Canada

Gender: male
Posts: 123
*****
 
Steve, you're right, its now a breeze. Had to go to 100% reality to get back some challenge. Re: engine start, close the throttle quadrant display and double-check that the magnetos are both on. (Switch is on the left side of the 2D panel) Works for me. Alpha Bleu Ciel, thanks for a super aircraft and patch!!
 

AMD 64 X2-5200, NVidia 9600GT 512, 2048 DDR, 2x250 GB SATA, Saitek X45, Win XP SP3 (Win7-64bitRC1 and FSX on 2nd HD)
IP Logged
 
Reply #21 - Oct 3rd, 2004 at 2:45am

stevewilson   Offline
Colonel
Wish I had my pic here!
Hanford, Ca.

Gender: male
Posts: 445
*****
 
dodger, thanks for the tip about the start switch. I hadn't found it yet, been using ctrl+E to start. Sure is a dream to fly now.

Steve
 

Steve&&&&CPU: Intel Pentium 4 519 3.06 GHz &&Memory: 512MB (256MBx2) DDR PC3200 (400MHz) DIMM &&Intel Graphics Media Accelerator 900 Graphics&&Motherboard: Intel Augsburg &&SATA 8MB Cache 160GB 7200 &&CD R/W ROM, DVD-R/RW&&1 CPU FAN, 1 ANTEC FAN&&300 W PSU, WITH FAN &&FS9/2002&&...
IP Logged
 
Reply #22 - Oct 4th, 2004 at 11:23pm

data65   Offline
Colonel
If Gmax says it can't
be done....CHEAT!! !!
Joplin, Mo.

Gender: male
Posts: 30
*****
 
Use the differential brakes F11 and F12
 
IP Logged
 
Pages: 1 2 
Send Topic Print