Search the archive:
YaBB - Yet another Bulletin Board
 
   
 
Pages: 1 2 
Send Topic Print
Flying North, North, North (Read 542 times)
Reply #15 - Sep 13th, 2004 at 7:25am

JBaymore   Offline
Global Moderator
Under the curse of the
hombuilt cockpit!

Gender: male
Posts: 10261
*****
 
IanK,

Thanks for the link...... but I think we are "not on the same page" here.......  Wink

The fs2004 "world" is not based on a spherical or near spherical model.  It is reportedly more of a cylindrical shape.  That makes the circumference at the limits of the northern and southern travel "cutoffs" out of scale....even if the circumference at the equatorial area is somewhat correct.

So I am wondering what the "modeled" circumference at the northernmost and southernmost points that you can actually get to actually is (in scale kilometers or miles).

In other words... I am wondering how far "off" flight distances get as you fly further and further from the equatorial area in fs2004.

best,

................john
 

... ...Intel i7 960 quad 3.2G LGA 1366, Asus P6X58D Premium, 750W Corsair, 6 gig 1600 DDR3, Spinpoint 1TB 7200 HD, Caviar 500G 7200 HD, GTX275 1280M,  Logitec Z640, Win7 Pro 64b, CH Products yoke, pedals + throttle quad, simpit
IP Logged
 
Reply #16 - Sep 13th, 2004 at 7:39am

Chris_F   Offline
Colonel
Insert message here

Posts: 1364
*****
 
Quote:
Ian,

Thanks... but I was wondering what the modeled circumference is in the simulator up at the point "the world ends"?

Someone would have had to fly around the world right at the latitude (or slewed around) to figure that out.

Or be on the Microsoft development team  Wink .

best,

..............john


IanK's math is right.  Assuming 84 degrees is as far north/south you can go then his 2255 nm is the smallest circumfrence you can fly (assuming they used equitorial circumfrence).

Now here's a more interesting question:  If the "world" really is a Mercator projection between the 60deg latitudes then this would mean that the middle of the world is indeed a cylinder.  So what is the circumfrence of this cylinder?  It's probably not the circumfrence of the real world equator (because if it were then you'd have to fly the equator circumfrence at all latitudes between the 60deg marks).  My guess would be half the difference between the  equitorial and 60deg latitude circumfrences.
 
IP Logged
 
Reply #17 - Sep 13th, 2004 at 8:57am

JBaymore   Offline
Global Moderator
Under the curse of the
hombuilt cockpit!

Gender: male
Posts: 10261
*****
 
Quote:
IanK's math is right.  Assuming 84 degrees is as far north/south you can go then his 2255 nm is the smallest circumfrence you can fly (assuming they used equitorial circumfrence).


ChrisF,

Yeah... I know it is right for the real world...... but reportedly the sim does not model the world based that way.  It is suppoesedly modeled something more like a cylindrical form with the "top" and "bottom" tapering in... but not spherically...... and then being "cut off" at the top and bottom well below what would be the "poles" (if it were a spherical shape).

So if this is true... the circumference at 84 degrees on the real world and the circumference at 84 degrees on the sim world model will likely not agree.  What I want to know is how far off are they?

This would impact flight plans that you are doing in the sim when compared to flying the same ones in the real world if you are flying it all at let's say 83 to 84 degrees.

best,

.................john
 

... ...Intel i7 960 quad 3.2G LGA 1366, Asus P6X58D Premium, 750W Corsair, 6 gig 1600 DDR3, Spinpoint 1TB 7200 HD, Caviar 500G 7200 HD, GTX275 1280M,  Logitec Z640, Win7 Pro 64b, CH Products yoke, pedals + throttle quad, simpit
IP Logged
 
Pages: 1 2 
Send Topic Print