Search the archive:
 YaBB - Yet another Bulletin Board
 
   
 
  Simviation Forum › Current Flight Simulator Series › FS 2004 - A Century of Flight › increments of 1000, 100, or 10 problems
(Moderators: Mitch., Fly2e, ozzy72, beaky, Clipper, JBaymore, Bob70, BigTruck)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1
Send Topic Print
increments of 1000, 100, or 10 problems (Read 187 times)
Jul 21st, 2004 at 6:56am

loomex   Offline
Colonel
My 1969 Ludwig "pre-Bohnam"
with extra stuff
FAA Ident KITH

Gender: male
 Posts: 1853
 *****
 
This happens on add-on planes, sometimes using default planes. I can only dial in ALT. in increments of 1000ft, speed and heading in increments of tens. Any Ideas?
 
Windows 7 Home Premium (x64) ,2.70 gigahertz AMD Phenom II X6 1045T(6-core), two HD (1TB and 500GB), 8gb RAM, ATI Radeon HD 5570,
Back to top 
IP Logged
 
Reply #1 - Jul 21st, 2004 at 7:51am

dave3cu   Offline
Colonel
Procrastinate now, don't
put it off.
3CU, Northern Wisconsin, USA

Gender: male
 Posts: 3077
 *****
 
Hi Loomex,

Did a search as I recalled the problem from earlier posts.

Heres a thread from FS2002:
http://www.simviation.com/cgi-bin/yabb/YaBB.cgi?board=fs2002;action=display;num=...

Another from COF:
http://www.simviation.com/cgi-bin/yabb/YaBB.cgi?board=COF;action=display;num=108...

Maybe these will help, or maybe Cleobis will jump in with his final solution.

Cheers,
Dave

 
At that time [1909] the chief engineer was almost always the chief test pilot as well. That had the fortunate result of eliminating poor engineering early in aviation.          Igor Sikorsky

I intend to live forever....so far, so good.         Steven Wright

You know....you can just rip up a to-do list.
Back to top 
IP Logged
 
Reply #2 - Jul 23rd, 2004 at 7:38am

loomex   Offline
Colonel
My 1969 Ludwig "pre-Bohnam"
with extra stuff
FAA Ident KITH

Gender: male
 Posts: 1853
 *****
 
Quote:
Great call Arthur!

Dont have a FSUIPC to 'open', just the dll in FS2002/modules, but opened  'fsuipc.ini', also in the module folder, and found the line 'fixcontrolaccel=no'.

Changed to 'yes' and the 737 ap appears back to normal.

Thanks

Cheers,
Dave


I am going to try this. The line was not in the file so I added it. I'll let you know if it works!

Chris

*edit* That did not work. The search goes on for a fix!
« Last Edit: Jul 23rd, 2004 at 1:02pm by loomex »  
Windows 7 Home Premium (x64) ,2.70 gigahertz AMD Phenom II X6 1045T(6-core), two HD (1TB and 500GB), 8gb RAM, ATI Radeon HD 5570,
Back to top 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print
‹ Previous Topic | Next Topic ›
  « Home ‹ Board Top of this page

Simviation Forum » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge