Search the archive:
YaBB - Yet another Bulletin Board
 
   
 
Page Index Toggle Pages: 1
Send Topic Print
AI PROB!!! (Read 190 times)
May 22nd, 2004 at 9:48pm

P-40_Warhawk   Offline
Colonel
The Stig
Savona New York

Gender: male
Posts: 266
*****
 
Hey. I made an ai package for KELM today. I used a repainted aircraft I made. It has the atc parcking code as CAL In afcad I made some gates and made the parking codes CAL. I notice that the planes are in parcking areas other than the ones I set as CAL. They were even in parking areas I set as NW or USA. I also notice they will stay in the parcking area for a LONG time. (at least 45 min.) Please help me work out these 2 problems!!!
                      See Ya,
                                 P-40_Warhawk- Future pilot.
 

Some say my pinky toe was replaced with a fountain pen, and that I love to ride on nuclear bombs with a saddle. All I know is.... I'm called THE STIG!!!!
IP Logged
 
Reply #1 - May 24th, 2004 at 8:46am

garymbuska   Offline
Colonel
I would rather be flying
Jacksonville, Florida

Gender: male
Posts: 2850
*****
 
How did you place this in the ai traffic file.
You might want to check out a program called simple ai
it gives you the layout of the entry needed for ai traffic,
If you look at the entry for this flight you should be able to spot your problem. You have to tell it what time to start the flight where it has to go to and what the repeat rate is.But in the real world most airlines have a 35 to 45 min turn time.Except for southwest which only has 10 min. Which is alomst impossable to make, esp if you have to put on alot of fuel.Internationl flights have anywhere from 1 hour to 3 hours between flights.
« Last Edit: May 24th, 2004 at 3:40pm by garymbuska »  
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print