Simviation Forum - Automatic engine on beginning of flight

	Search the archive:

Simviation Main Site | Site Search | Upload Images

Simviation Forum › Old Flight Simulator Series › FS 2002 › Automatic engine on beginning of flight

(Moderators: Mitch., Fly2e, ozzy72, beaky, Clipper, JBaymore, Bob70, BigTruck)

‹ Previous Topic | Next Topic ›

Pages: 1

Automatic engine on beginning of flight (Read 85 times)

Mar 27^th, 2004 at 7:49am

Saitek Offline
Colonel
UK

Gender:
Posts: 7555

Most sorry for bringing this up again. I know it was only brought up a few weeks back, if that. I want to start the aircraft, turn on the electronics etc on my own. What do I do? Thanks,

Ben

Windows 7 Pro 64bit
Intel Core 2 Duo E2180 2GHz
GA-P35-DS3L Intel P35
Kingston HyperX 4GB (2x2) DDR2 6400C4 800Mhz
GeForce 8800 GT 512MB
2 x 22" monitors
200GB Sata
Be Quiet! Straight Power 650W

Flying FSX with Saitek's pro flight range:
Radio
Switch panel
Auto-pilot
Yoke and throttle quad
Pedals

IP Logged

Reply #1 - Mar 27^th, 2004 at 8:30am

dave3cu Offline
Colonel
Procrastinate now, don't
put it off.
3CU, Northern Wisconsin, USA

Gender:
Posts: 3077

Hi Saitek,

Create new flight, once in the a/c shut everything down.
Save the flight and set it as the default flight.

Any new flights you create will begin 'dark'.

There is also a gauge you can d'load that will start you 'dark' if on the ground http://www.simviation.com/fsgauges_7.htm but you have to edit it into the panel of each a/c you wish dark.

Cheers,
Dave

At that time [1909] the chief engineer was almost always the chief test pilot as well. That had the fortunate result of eliminating poor engineering early in aviation. Igor Sikorsky

I intend to live forever....so far, so good. Steven Wright

You know....you can just rip up a to-do list.

IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page