Hello All
           Something which is really annoying me is that I just cant install new textures on Aircraft that you need to cut and paste a new part of the download to the CFG File of the Aircraft its for. If anybody has any tips or advice on how to do this it would be great.
Thanks

Hello again
                Thanks Hagar for the reply but Im still having problems but I think Im almost there. I have installed the new textures into the correct Aircraft folder and pasted the new cfg stuff changing the fs number to "1" as the first one was "fs0" (Is this correct) and now when I go to select Aircraft it is there but when I select it, it pops up with "Aircraft Initialization Failure" Any ideas what Ive done wrong. Hope that makes sense but its just one of these really annoying things that you cant stop until it works.
Thanks Guys J41

I've had the same problems. Has been trying for a couple of weeks now . But I'll try this 

[fltsim.0]                                                 ;This entry should be different
title=AC500 N22WR VC                           ; This entry should be different
sim=AC500vc
model=ac500vc               ;This entry MAY be different, in the case where a texture uses a                           different model. ( ie. a seaplane variation)
panel=blu
sound=
texture=n22wr                                        ;This entry should be different
description=Textures by André Folkers. Beginning in 1958, Aero Design & Engineering Company rolled out the econo-model 500. There were 101 units  built between 1958 & 1960. The AC500 Power : Lycoming O-540-A2B - 250 HP each at 2575 RPM.  

kb_checklists=AC500_Check
kb_reference=AC500_Ref
ui_manufacturer=Aero Design
ui_type=AC50                  ;This entry MAY be different
ui_variation=N22WR VC                             ;This entry should be different
atc_heavy=0
atc_id=N22WR                 ;This entry MAY be different
atc_airline=                      ;This entry MAY be different
atc_flight_number=1958  ; This entry MAY be different
atc_type=ROCKWELL
atc_model=AC50


                                         Compare this changed entry below.


[fltsim.1]
title=AC500 N500MS VC
sim=AC500vc
model=ac500vc
panel=tan
sound=
texture=orange
description=Textures by André Folkers. Beginning in 1958, Aero Design & Engineering Company rolled out the econo-model 500. There were 101 units  built between 1958 & 1960. The AC500 Power : Lycoming O-540-A2B - 250 HP each at 2575 RPM.  

kb_checklists=AC500_Check
kb_reference=AC500_Ref
ui_manufacturer=Aero Design
ui_type=AC50
ui_variation=N500MS VC
atc_heavy=0
atc_id=N500MS
atc_airline=
atc_flight_number=1959
atc_type=ROCKWELL
atc_model=AC50

Also don't forget to have a complete texture set as your alternate texture, some downloads just come with a partial texture set.

The Texture folder you add to the aircraft's folder must be named like this:

texture.orange

for the above extra texture to work.

Context is sensitive.

context not case.... as in all the right format, dots, symblos etc.