Search the archive:
YaBB - Yet another Bulletin Board
 
   
 
Page Index Toggle Pages: 1
Send Topic Print
Ferrying a Junkers JU-52 - Part 2 (Read 170 times)
Feb 14th, 2004 at 6:32pm

BFMF   Offline
Colonel
Pacific Northwest

Gender: male
Posts: 19820
*****
 
As soon as the tanks were filled, I got a weather update, filed my flightplan, and departed Unalaska at 2330Z.

I set a course for Port Heiden (PAPH), via Cold Bay (CDB) and Sand Point (PASD) for a total of 348 nm. Besides some scattered clouds and some occasional light turbulence, things went well as I watched the islands go by. For some reason, the autopilot was acting up on me so flying the aircraft by hand kept me busy.

Soon after I passed PASD, I picked up a 30 knot tailwind that stayed with me untill I neared Port Heiden, when I started to encounter more clouds, and medium to severe turbulence. I tuned my radio to the local AWOS and learned that there were low ceilings with visibility down to 3 nm, plus winds were 25 knots out of the South. Wasn't too good, but I I was starting to get low on fuel, so I had to land. Once I got closer, I descended into the fog, circled the airport, and landed at 0205Z. Thankfully, the winds weren't gusty so I was able to make a smooth landing. Once down, I taxied to the fuel pumps, shut everything down, and closed my flightplan.


...

...

...

...

...

...

...

...


Read Part 1 @ http://www.simviation.com/cgi-bin/yabb/YaBB.cgi?board=screen;action=display;num=...

-Andrew
 
IP Logged
 
Reply #1 - Feb 15th, 2004 at 3:20am

ozzy72   Offline
Global Moderator
Pretty scary huh?
Madsville

Gender: male
Posts: 37122
*****
 
30 knot tail wind Shocked Andrew you NEED to lay off the baked beans mate Wink

Mark

Ps. Some nice mountain shots there Smiley
 

...
There are two types of aeroplane, Spitfires and everything else that wishes it was a Spitfire!
IP Logged
 
Reply #2 - Feb 15th, 2004 at 8:15am
Silent Exploder   Ex Member

 
nice shots of a masterpiece of german engineering! Wink
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print