Simviation Forum - invisible planes

	Search the archive:

Simviation Main Site | Site Search | Upload Images

Simviation Forum › Current Flight Simulator Series › Adding Aircraft Traffic (AI) & Gates › invisible planes

(Moderators: Mitch., Fly2e, ozzy72, beaky, Clipper, JBaymore, Bob70, BigTruck)

‹ Previous Topic | Next Topic ›

Pages: 1

invisible planes (Read 557 times)

Nov 1^st, 2003 at 7:25pm

loomex Offline
Colonel
My 1969 Ludwig "pre-Bohnam"
with extra stuff
FAA Ident KITH

Gender:
Posts: 1853

I set up a flight plane for one of my military planes. I can see the plane in spot view, but not from the cockpit....except its FS2004 lights. This plane was an FS2002 that seems to fly good in FS2004. Oh the plane is my EB-52V3.any ideas?

Chris

Windows 7 Home Premium (x64) ,2.70 gigahertz AMD Phenom II X6 1045T(6-core), two HD (1TB and 500GB), 8gb RAM, ATI Radeon HD 5570,

IP Logged

Reply #1 - Nov 1^st, 2003 at 10:49pm

JBaymore Offline
Global Moderator
Under the curse of the
hombuilt cockpit!

Gender:
Posts: 10261

Loomex,

You ever hear that old song......

"Ghost Riders in the Sky" ? Wink

best,

...............john

Intel i7 960 quad 3.2G LGA 1366, Asus P6X58D Premium, 750W Corsair, 6 gig 1600 DDR3, Spinpoint 1TB 7200 HD, Caviar 500G 7200 HD, GTX275 1280M, Logitec Z640, Win7 Pro 64b, CH Products yoke, pedals + throttle quad, simpit

IP Logged

Reply #2 - Nov 2^nd, 2003 at 8:55am

loomex Offline
Colonel
My 1969 Ludwig "pre-Bohnam"
with extra stuff
FAA Ident KITH

Gender:
Posts: 1853

i thought about that Cheesy

I found that I can see just the engines. I swapped the '52s for a yb-60 and it worked great so I am at a loss

Windows 7 Home Premium (x64) ,2.70 gigahertz AMD Phenom II X6 1045T(6-core), two HD (1TB and 500GB), 8gb RAM, ATI Radeon HD 5570,

IP Logged

Reply #3 - Nov 2^nd, 2003 at 10:39am

JBaymore Offline
Global Moderator
Under the curse of the
hombuilt cockpit!

Gender:
Posts: 10261

Loomex,

Probably something to do with the visual model. Pretty bizzare though.

best,

...............john

IP Logged

Reply #4 - Nov 2^nd, 2003 at 10:56am

RollerBall Ex Member

There are things that you can just do nothing about.

I repainted the default Jumbo with several different BA tailfin liveries for use as AI. It looked and worked great - better than other AI because it has proper u/c detail and all moving parts.

However I noticed that in cockpit view from another aircraft from certain angles the bottom section of the fuselage becomes transparent and you can see the engines on the other side.

If you can't put up with it (and in your case it sounds a bit extreme) fraid you just have to bin the model

IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page