Simviation Forum - AI TRAFFIC

	Search the archive:

Simviation Main Site | Site Search | Upload Images

Simviation Forum › Old Flight Simulator Series › FS 2002 › AI TRAFFIC

(Moderators: Mitch., Fly2e, ozzy72, beaky, Clipper, JBaymore, Bob70, BigTruck)

‹ Previous Topic | Next Topic ›

Pages: 1

AI TRAFFIC (Read 144 times)

Oct 8^th, 2003 at 8:07pm

GLobemanX Offline
Colonel

Posts: 10

I am having such a hard time trying to load AI traffic ttools 2.02. it gets fustrating. what i do is click the decompile button and it does it right. but then after that what do i do??? i just want to add alot of AI traffic to Los Angeles.

PLEASE SOME HELP.......THANKS

MSI Delta K7N2-L AMD 2000 XP+ 512MB PC3200 WD 120GB M-AUDIO DELTA 128MB 9200 RADEON

IP Logged

Reply #1 - Oct 8^th, 2003 at 9:02pm

Heber98 Offline
Colonel
I love YaBB 1G - SP1!

Posts: 64

Do you have specific AI planes that you want flying around?

For instance, if you want to make the default 747 fly around you would programming aircraft #6,7,or 8 according to the aircraft.txt file that was produced by the decompile.

You write a flight plan for that aircraft like the instructions say: (should all be one line)
AC#6,N29696,56%,12Hr,IFR,
01:46:21,06:29:27,320,F,2953,KLAX,
07:46:16,12:29:22,310,F,2954,KMCO

Translates to:
aircraft in aircraft.txt,registration, percentage, repeat period, IFR or VFR,
departs kmco @01:46 zulu, arrives @06:29 zulu, flight level 320, uses flight number, flight# 2953, destination klax,
departs klax @07:46 zulu, arrives @12:29 zulu, flight lever 310, uses flight number, flight# 2954, destination kmco

paste your new flight plan to the end of your flightplan.txt file, save, and then recompile.

IP Logged

Reply #2 - Oct 8^th, 2003 at 9:25pm

GLobemanX Offline
Colonel

Posts: 10

i dont know how to use traffic tools 2.02. i have tried following the directions but nothing ever happens. i click decompile then it shows 36 aircraft 25,093 flight plans and the airports. after that the instructions say to open flight plans from the decompile but i cant do that. the 3 are always highlighted. and even if i have it highlighted on flight plans and i click it still doesnt open. i must be missing something....besides i dont know much about files anyways.

MSI Delta K7N2-L AMD 2000 XP+ 512MB PC3200 WD 120GB M-AUDIO DELTA 128MB 9200 RADEON

IP Logged

Reply #3 - Oct 9^th, 2003 at 2:58am

BFMF Offline
Colonel
Pacific Northwest

Gender:
Posts: 19820

When you decompile the traffic.bgl file, Traffic Tools creates three text files. 1 is for the aircraft listing, 1 is for the airports list, and the last one is for the actual flightplans.

It's the flightplan textfile that you put your flights in. Once saved you recompile it and go watch them in the simulator

COMPLETED: If Anyone Cares, Here's A Map Of My Current FSX Flight Around The World

My Reality Check Bounced

IP Logged

Reply #4 - Oct 9^th, 2003 at 5:34am

Heber98 Offline
Colonel
I love YaBB 1G - SP1!

Posts: 64

The three files are text files. You can read them with Notepad, Wordpad, or any word processor. The flightplan file is too large for Notepad, usually my Wordpad program opens it. You can try MS Word or Works. You add your new flight plan entries to the end of the file and then resave it, make sure you save it as a .txt file. The 3 files should stay in the same folder as TTools. After you add your flight plans and save, run the recompile utility and then crank up FS to KLAX and see what you got.

IP Logged

Reply #5 - Oct 9^th, 2003 at 8:22am

Scottler Offline
Colonel
Albany, New York USA

Gender:
Posts: 5989

The easiest way to add real world liveries, IMO, is with ProjectAI. Drag and drop...couldn't be easier.

check http://www.projectai.com

Great edit, Bob.&&&&&&Google it. &&&&www.google.com

IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page