Search the archive:
YaBB - Yet another Bulletin Board
 
   
 
Page Index Toggle Pages: 1
Send Topic Print
Updating Altimeter? (Read 115 times)
Sep 17th, 2003 at 2:48pm

Cherokee_6   Offline
Colonel
Calgary, Alberta, Canada

Gender: male
Posts: 1298
*****
 
I am sure this has been asked before but I will ask again because I cannot find the answer...

Right now my Altimeter says 5150 ft. When I contacted a center they said the current altimeter is 3008 ft.

How do I change my Altimeter to reflect the accurate altitude??

Thanks everyone in advance!
 

P4 2.6 Ghz w/ 800Mhz FSB & HT Technology, XP Home, 512MB Dual Channel DDR SDRAM at 333 Mhz, 128MB GeForce FX 5200 Video Card, 80GB Ultra ATA/100 HD, Sound Blaster Live! 5.1 w/ Dolby Digital Sound Card.
IP Logged
 
Reply #1 - Sep 17th, 2003 at 3:18pm

ozzy72   Offline
Global Moderator
Pretty scary huh?
Madsville

Gender: male
Posts: 37122
*****
 
When ATC tell you the new setting hit B if I remember correctly....

Ozzy Wink
 

...
There are two types of aeroplane, Spitfires and everything else that wishes it was a Spitfire!
IP Logged
 
Reply #2 - Sep 17th, 2003 at 4:15pm

zcottovision   Offline
Colonel
YaBB 1G - SP1 loves me!
N. Ireland / EGAC

Gender: male
Posts: 598
*****
 
Yup, pressing B will reset your altimeter to the current one.

Also, they didn't say that the current altimeter is 3008ft, what they mean is that it's 30.08 on the altimeter scale. More people will know more about this than me, but it's also possible to change the altimeter manually. If you're flying the Cessna, there's a little knob to the bottom left of the altimeter, move your mouse over it, and turn it to the left to watch the altimeter setting rise, and vice versa.
 
IP Logged
 
Reply #3 - Sep 17th, 2003 at 5:37pm

Nexus   Offline
Colonel
The greater of two evils...

Gender: male
Posts: 3282
*****
 
Here's a good thread about the altimeter/ atmosphere pressure settings.

http://www.simviation.com/cgi-bin/yabb/YaBB.cgi?board=fs2002;action=display;num=...
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print