Search the archive:
YaBB - Yet another Bulletin Board
 
   
 
Page Index Toggle Pages: 1
Send Topic Print
How do you fly Helicopters?! (Read 294 times)
Jun 23rd, 2003 at 5:05am
Toad   Guest

 
I downloaded the cobra and the Huey for CFS2 and I have no idea how to fly those things, my throttle picks the aircraft up and drops it down, but moving forward is slow and hard. someone have any instructions like extra keys to use???

-Andrew
 
IP Logged
 
Reply #1 - Jun 23rd, 2003 at 5:14am

ozzy72   Offline
Global Moderator
Pretty scary huh?
Madsville

Gender: male
Posts: 37122
*****
 
Once you are hovering push your joystick forward to gain speed. To slow down lower the throttle and pull back on the stick.

Ozzy
 

...
There are two types of aeroplane, Spitfires and everything else that wishes it was a Spitfire!
IP Logged
 
Reply #2 - Jul 21st, 2003 at 5:14am

Christopher_Mair   Offline
Colonel
I love YaBB 1G - SP1!

Posts: 11
*****
 
To Toad,

To fly these extraordinary pieces of equipment you need to raise the throttle to about 80% or more (it varies between different Choppers). As long as you keep the bird level this should elevate you smoothly. To traverse forward lower the nose so that the thrust is pushing back slightly as well (A bit like swivelling the nozzles on a Harrier). Lowering the nose to 45 degrees is the optimum climb rate because the thrust is distributed evenly between the vertical and the horizontal.

Have fun flying those choppers and get back to me! Smiley
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print