Search the archive:
YaBB - Yet another Bulletin Board
 
   
 
Page Index Toggle Pages: 1
Send Topic Print
I'm no octapus, so whats with the Speedbrake (Read 162 times)
May 24th, 2003 at 7:57pm

HeavyMetal   Offline
Colonel
Frankfurt - Main (Rhein-Main
AFB) (FRA / FRF / EDD
Fergus, Ontario, Canada

Gender: male
Posts: 182
*****
 
Flying the Boeing 777, on touchdown I have one hand on the joystick to put the nose down and stay straight on the runway.  The other hand is activating the reverse thrusters. So then, how does one use the speedbrake?  Is this device used after landing or on final approach before touchdown, like if your approach is too fast? Any ideas?? On the MelJet 777, there is a knob right beside the gear lever that is marked Autobrake. It has several settings like 1,2,3, MAX and RTO. How is this used?? Also, on the speedbrake lever what is "ARM". As you can see by my questions re braking, I have my fair share of "off the end of the runway" problems. I fly a perfect ILS landing in the 777, then have trouble stopping this big bird. BTW, I'm landing on 13,000ft runways.

Speedbird_1961

thanks in advance.
 

A life?........Cool...........Where can I download one of those?&&&&The Beast:&&&&ABIT NF7-S Motherboard V2.0 400Mhz FSB&&NVIDEA nForce2 Ultra400 chipset w/MCP-T&&Athlon/XP 3200+ CPU 400mhzFSB&&WindowsXPHome SP2&&Antec TruePower 480W PSU&&Thermaltake Extreme Volcano12 Heatsink&&2X512 Dual Channel DDR400 Corsair Ram&&Maxtor Ultra ATA/133 7200rpm 120gig HDD &&ASUS V9280 Ti4200 GeForce4 128mg DDR RAM&&Sony 20
IP Logged
 
Reply #1 - May 24th, 2003 at 8:48pm

zcottovision   Offline
Colonel
YaBB 1G - SP1 loves me!
N. Ireland / EGAC

Gender: male
Posts: 598
*****
 
In most of the big jets, you can "arm" the speedbrakes by pressing shift + / . This will set them to deploy as soon as your plane hits the ground, and will slow you down fairly rapidly. It saves you having to do them yourself.

Used in conjuction with autobrakes (for the wheels) set to Medium or High and the reverse thrusters, you should be able to stop any plane fairly quickly!

RTO on the autobrakes should always be set on take-off - RTO just stands for rejected take off, and slows you down rapidly if you reach the end of the runway and aren't able to take off for any reason.
 
IP Logged
 
Reply #2 - May 24th, 2003 at 8:53pm

HeavyMetal   Offline
Colonel
Frankfurt - Main (Rhein-Main
AFB) (FRA / FRF / EDD
Fergus, Ontario, Canada

Gender: male
Posts: 182
*****
 
ok, thanks. im gonna try that.

Speedbird_1961
 

A life?........Cool...........Where can I download one of those?&&&&The Beast:&&&&ABIT NF7-S Motherboard V2.0 400Mhz FSB&&NVIDEA nForce2 Ultra400 chipset w/MCP-T&&Athlon/XP 3200+ CPU 400mhzFSB&&WindowsXPHome SP2&&Antec TruePower 480W PSU&&Thermaltake Extreme Volcano12 Heatsink&&2X512 Dual Channel DDR400 Corsair Ram&&Maxtor Ultra ATA/133 7200rpm 120gig HDD &&ASUS V9280 Ti4200 GeForce4 128mg DDR RAM&&Sony 20
IP Logged
 
Reply #3 - May 25th, 2003 at 3:54am

Mr. Bones   Offline
Colonel

Posts: 4304
*****
 
one remark...if you arm the autospoilers, they will deploy when you reverse trust and they will go down again when you put your throttle back in idle.

the autobrakes start working when you have your throttle in idle. the plane with use the brakes without touching them yourself.
 

Raw power...the J-58.&&...&&&&My Anet collection.&&
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print