Simviation Forum - An unusual exporting problem (I think)

May 12^th, 2003 at 10:11am

Erez Offline
Colonel
In winter 2004... He is
back - in white! IAI
Lavi
israel

Gender:
Posts: 376

Well I wanted to "test drive" my model in Fs2002 so I decided to export it. There weren't any unusual (and important) problems, but every time I try to export it, it stops on 83% and says that there isn't enough memory for the program and that it will now be closed, and gives me an option to save it.......
I got a pretty good computer, Pentium 4 1700, and I don't think that should happened....... I even closed all the other running programs.......
Anyone have seen something like this before?

Back to top

IP Logged

Reply #1 - May 12^th, 2003 at 10:23am

javier Offline
Colonel
I love YaBB 1G - SP1!

Posts: 10

Hey, how are you men........... 8)

you have to check the system memory, for this kind of programs you really need it. say no lower than 384 -512 mgb ram are needed.

You do not specify how much do you have...............

Also, the computer must have activated the virtual memory that uses hard drive up to 2 mgb or so. In case your video card has not enough memory also.

Back to top

IP Logged

Reply #2 - May 12^th, 2003 at 10:24am

d0mokun Offline
Colonel
What's cooler than cool?
Ice cold!
Staffs, UK

Gender:
Posts: 1165

whats the poly count on the model?
and which program is it you're using?
Also have you tried just leaving it.. a lot of the time on mine it appears to stop dead then after a min or two it'll finish and resort back to gmax, file exported et al.

Regards,&& Dano&&&&Daniel Dunn&&StudioTwentyOne design team&&&&Formerly known as Moomin_dan ...

Back to top

IP Logged

Reply #3 - May 12^th, 2003 at 1:30pm

Erez Offline
Colonel
In winter 2004... He is
back - in white! IAI
Lavi
israel

Gender:
Posts: 376

Quote:

say no lower than 384 -512 mgb ram are needed.

Really? and other computers can't?
LMAO, I only got 128!
These models are extremely expensive in Israel since they only got here, and you might know that the all economic situation here isn't well........ and my parents are not the kind of people to replace a machine every two years...... especially not just for one 3D model Sad

Dan, how much poly count is recommended? it's a pretty simple model you know........
It's on gMax.........

Back to top

IP Logged

Reply #4 - May 12^th, 2003 at 1:51pm

d0mokun Offline
Colonel
What's cooler than cool?
Ice cold!
Staffs, UK

Gender:
Posts: 1165

weeeel poly wise, i like to stick under 50,000 but it all depends on how detailed etc.
some models are 12,000, some are 60,000. depends on the designer and other aspects.
As for 128mb.. lol... try booting into safe mode (by pressing f8 on startup; at the splash screen) then doing it. That'll make sure the pc doesnt load wanton crap and only loads the stuff you can [barely] survive on.

Regards,&& Dano&&&&Daniel Dunn&&StudioTwentyOne design team&&&&Formerly known as Moomin_dan ...

Back to top

IP Logged

Reply #5 - May 12^th, 2003 at 2:12pm

Erez Offline
Colonel
In winter 2004... He is
back - in white! IAI
Lavi
israel

Gender:
Posts: 376

Well it's now on 21990 polygons and the model is almost done.........
I'll try doing this on safe mode

Back to top

IP Logged

Reply #6 - May 12^th, 2003 at 2:17pm

d0mokun Offline
Colonel
What's cooler than cool?
Ice cold!
Staffs, UK

Gender:
Posts: 1165

keep us all updated wontcha

Regards,&& Dano&&&&Daniel Dunn&&StudioTwentyOne design team&&&&Formerly known as Moomin_dan ...

Back to top

IP Logged

Reply #7 - May 13^th, 2003 at 7:55am

Erez Offline
Colonel
In winter 2004... He is
back - in white! IAI
Lavi
israel

Gender:
Posts: 376

Guess what........... Sad

I guess I'll need to find out someone that won't laugh on my work Grin

and give it to him for the exporting........

Back to top

IP Logged

Reply #8 - May 13^th, 2003 at 12:13pm

d0mokun Offline
Colonel
What's cooler than cool?
Ice cold!
Staffs, UK

Gender:
Posts: 1165

Quote:

Guess what........... Sad

I guess I'll need to find out someone that won't laugh on my work Grin

and give it to him for the exporting........

[poke poke]

Regards,&& Dano&&&&Daniel Dunn&&StudioTwentyOne design team&&&&Formerly known as Moomin_dan ...

Back to top

IP Logged

Reply #9 - May 13^th, 2003 at 1:35pm

Erez Offline
Colonel
In winter 2004... He is
back - in white! IAI
Lavi
israel

Gender:
Posts: 376

Hmmmmmm............
Dan, would you mind? Wink

You are a great designer and I'm a total beginner so just promise me that you only export it and not gonna laugh out on me all over the net Grin

Back to top

IP Logged

Reply #10 - May 13^th, 2003 at 1:40pm

d0mokun Offline
Colonel
What's cooler than cool?
Ice cold!
Staffs, UK

Gender:
Posts: 1165

Quote:

Hmmmmmm............
Dan, would you mind? Wink

You are a great designer and I'm a total beginner so just promise me that you only export it and not gonna laugh out on me all over the net Grin

sure thang.. mail it to me at dd@bac-f6.com i'll pick it up within 2 minutes oof sending and return asap.
8)

Regards,&& Dano&&&&Daniel Dunn&&StudioTwentyOne design team&&&&Formerly known as Moomin_dan ...

Back to top

IP Logged

Reply #11 - May 13^th, 2003 at 2:02pm

Erez Offline
Colonel
In winter 2004... He is
back - in white! IAI
Lavi
israel

Gender:
Posts: 376

Many thanks Dan Cheesy

Should I do anything before you export it (such as part naming)?
I only want to check up the basic model (no animations and other thing...)
I sent you it right now

Back to top

IP Logged

	Search the archive: