Search the archive:
YaBB - Yet another Bulletin Board
 
   
 
Page Index Toggle Pages: 1
Send Topic Print
Damage Won't Show (Read 446 times)
May 2nd, 2003 at 12:41am

Biggles   Offline
Colonel

Gender: male
Posts: 404
*****
 
I'm not sure if anyone will be able to help me with this but here it is.

When playing CFS3 and I get shot up be enemy aircraft the damage textures do not show up so I don't see any bullet holes orlike on the body of my plane.

Also related to this is I cannot apply noseart and wing-tip colours to my aircraft. I can try but it won't show up.

This isn't so much of a problem but an annoyence.
Any help will be greatly appreciated.
Biggles
 
IP Logged
 
Reply #1 - May 2nd, 2003 at 2:42am

SilverFox441   Offline
Colonel
Now What?
Mississauga, Ontario, Canada

Gender: male
Posts: 1467
*****
 
System specs?

Some graphics cards are limited and those features get disabled.

You might also take a look at the config utility to make sure they weren't turned off.
 

Steve (Silver Fox) Daly
&&
IP Logged
 
Reply #2 - May 2nd, 2003 at 8:57am

Mathias   Offline
Colonel
Toy Maker
Germany

Gender: male
Posts: 558
*****
 
Put your aircraft detail slider at least to 3, that should do the trick.
 

Mathias&&...
IP Logged
 
Reply #3 - May 2nd, 2003 at 1:32pm

Woodlouse2002   Offline
Colonel
I like jam.
Cornwall, England

Gender: male
Posts: 12574
*****
 
Open up CFSconfig and go to custimize then overrides. A box labeled "Dual pass render" will be checked. Uncheck it and press ok.

This should guarentee the damage effects etc. Its always worked for others.

In the long run I recommend a new graphics card. Wink
 

Woodlouse2002 PITA and BAR!!!!!!!!&&&&Our Sovereign Lord the King chargeth and commandeth all persons, being assembled, immediately to disperse themselves, and peaceably to depart to their habitations, or to their lawful business, upon the pains contained in the Act made in the first year of King George the First for preventing tumults and riotous assemblies. God Save the King.&&&&Viva la revolution!
IP Logged
 
Reply #4 - May 2nd, 2003 at 6:52pm

Biggles   Offline
Colonel

Gender: male
Posts: 404
*****
 
Ok thanks guys, I'll check that out. Shoun't be my graphics card 'cause when I first installed got CFS3 running they worked fine.
Biggles
 
IP Logged
 
Reply #5 - May 2nd, 2003 at 6:55pm

Biggles   Offline
Colonel

Gender: male
Posts: 404
*****
 
I found that I already had 'Dual Pass Render' unchecked so it must be my aircraft detail level.
Thanks again
Biggles
 
IP Logged
 
Reply #6 - May 4th, 2003 at 1:46pm

Bogey51   Offline
Colonel
I love YaBB 1G - SP1!

Posts: 70
*****
 
Mathias hit it right on the head Biggles, at least 3 on the aircraft detail, 4 would be even better.
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print