Simviation Forum - Some great Peformance tweaks That deserve its own topic

Sep 1^st, 2011 at 3:21pm

michaelb15 Offline
Colonel
Whos that?
Lindsay, Ontario, Canada

Gender:
Posts: 946

So a few days ago when these forums were down, I was initally dissapointed, but it seemed to be a blessing in disguise for me..

I was over at the avsim forums, and I learned some things that increased my FSX peformance to almost double what it was before.. And Blurries? they are history for me..

One of the best tweaks that I added to the fsx.cfg
[JOBSCHEDULER]
affinitymask=3

adding that to the fsx.cfg alone increased fsx's peformance at least 50% for me. It made fsx use both cores in my dual core to the max, instead of it just using 1 core and rarely using core 2..

Before tweaking I wouldn't even considor flying low to the ground VFR, but now it runs like a dream and looks amazing with great FPS, as high as 25-30fps, (at least 10 at lower altitudes) from the 3fps I was used to.

Even flying over the 10 meter mesh that I downloaded from here gets at least 8-10 fps with the mesh LOD at 19m (http://simviation.com/1/browse-Terrain+Mesh-64-1)

The next thing was I put fsx.cfg through this website --
http://www.venetubo.com/fsx.html

That adds quite a few tewaks for autogen, and helps fight those damned blurries, so now I can fly at 200kias at treetop level and still have crisp clear textures, and the autogen doesnt dissapear at all, it loads perfectly fine atleast 2-3 miles infront of me..

I am surprised that nobody here at simv has ever pointed out those tweaks, and that is why I am here now spreading the word!

Hope this can help you too!
cheers for now, mike

« Last Edit: Nov 23^rd, 2011 at 6:22am by pete »

I am somwhere I don't know where I am!!!&&

Back to top

IP Logged

Reply #1 - Sep 1^st, 2011 at 4:42pm

jon157uk Offline
Colonel
I Love Beaver!

Posts: 45

Thanks very much Michael, I'll give this a try myself.

Back to top

IP Logged

Reply #2 - Sep 2^nd, 2011 at 3:28pm

jime59 Offline
Colonel
I Fly Sim!
Streamwood,Il

Gender:
Posts: 1608

Actually, alot of us have used this, last year. Not to put a damper on your find, but I've since done a complete re-install and use very few, if any, tweaks. Back then the tweaks did improve my simming but since then I've upgraded my GPU, installed W7 64, and I haven't had the need for the tweaks. I'm glad they've helped you and some of the newer simmers here might not have heard of it and can maybe benefit from your post, so thanks for posting it.

jime

The mind is like a parachute...it only works when it's open.

Back to top

IP Logged

Reply #3 - Sep 2^nd, 2011 at 5:40pm

BigTruck Offline
Global Moderator
Former Sergeant of Marines
Tuscaloosa, AL

Gender:
Posts: 7161

This Topic was moved here from Flight Simulator X by BigTruck.

Back to top

IP Logged

Reply #4 - Sep 2^nd, 2011 at 5:42pm

BigTruck Offline
Global Moderator
Former Sergeant of Marines
Tuscaloosa, AL

Gender:
Posts: 7161

michaelb15 wrote on Sep 1^st, 2011 at 3:21pm:

I am surprised that nobody here at simv has ever pointed out those tweaks, and that is why I am here now spreading the word!

Have you read through all the posts here in the Tweaking and Overclocking threads Wink

Back to top

IP Logged

Reply #5 - Sep 3^rd, 2011 at 4:14am

NNNG Ex Member

I don't think the jobscheduler tweak is required if you are running with SP2 or Acceleration installed. In any case:

Dual-cores set it to:
affinitymask=3

Tri-cores:
affinitymask=7

Quad-cores:
affinitymask=15

Hex-cores:
affinitymask=63

Octo-cores:
affinitymask=255

12-cores:
affinitymask=4095

16 cores:
affinitymask=65535

Back to top

IP Logged

Reply #6 - Sep 10^th, 2011 at 8:02pm

expat Offline
Colonel
Deep behind enemy lines!

Gender:
Posts: 8499

Quote:

I don't think the jobscheduler tweak is required if you are running with SP2 or Acceleration installed. In any case:

Dual-cores set it to:
affinitymask=3

Tri-cores:
affinitymask=7

Quad-cores:
affinitymask=15

Hex-cores:
affinitymask=63

Octo-cores:
affinitymask=255

12-cores:
affinitymask=4095

16 cores:
affinitymask=65535

My new computer had two duel cores. Do I set for duel cores or for a total core-age with the quad setting?

Matt

PETA People Eating Tasty Animals.

B1 Boeing 737-800 and Dash8 Q-400

Back to top

IP Logged

Reply #7 - Sep 11^th, 2011 at 2:19am

NNNG Ex Member

expat wrote on Sep 10^th, 2011 at 8:02pm:

Quote:

I don't think the jobscheduler tweak is required if you are running with SP2 or Acceleration installed. In any case:

Dual-cores set it to:
affinitymask=3

Tri-cores:
affinitymask=7

Quad-cores:
affinitymask=15

Hex-cores:
affinitymask=63

Octo-cores:
affinitymask=255

12-cores:
affinitymask=4095

16 cores:
affinitymask=65535

My new computer had two duel cores. Do I set for duel cores or for a total core-age with the quad setting?

Matt

Try the quad core setting instead of the dual core one. Also you can try a setting of 14 or 7... I heard they might work better but not sure.

Back to top

IP Logged

Reply #8 - Nov 23^rd, 2011 at 12:07pm

Fishbed7701 Offline
Colonel
XFalcon750 here with a
facelift.
KORD

Gender:
Posts: 190

Do you add the [JOBSCHEDULER] affinitymask=3 to the cfg? I can't seem to find it

*Specs* Dell Inc. Inspiron 530s... Win7 64 bit...Intel Pentium Dual core @ 1.80 GHz...AMD Radeon Sapphire 6670HD...6GB of RAM

Back to top

IP Logged

Reply #9 - Nov 23^rd, 2011 at 12:13pm

Faildozer. Ex Member

Fishbed7701 wrote on Nov 23^rd, 2011 at 12:07pm:

Do you add the [JOBSCHEDULER] affinitymask=3 to the cfg? I can't seem to find it

By default FSX with SP2 or Acceleration will utilize all cores.

If you want to change it then add it to fsx.cfg manually.

Back to top

IP Logged

Reply #10 - Nov 26^th, 2011 at 11:25am

Club508 Offline
Colonel
I like repainting aircraft!
Planet Earth

Gender:
Posts: 1528

I found another interesting "tweak" You can do with the weather to really shoot up performance.
Lower the visibility.
In the test I did, with unlimited visibility, it would jump in the ranges between 40-55 and 70-85 fps.
With 10 mile visibility, it jumped around in the ranges of 80-95, 140-155, and occaisionally jump to 190-210 fps when it was in the range of 140-155.
That's already +40 fps on the low end and about +70 fps or +125 fps on the high end!

If you want the specifications of the test, here they are:
Flight: Default Friday Harbor flight and position, going straight. default white with blue and gold. C172. day, 12:00 Local time, Summer. Default Clear weather.
Settings: 1024x768x32 resolution. Global texture quality=Maximum. Bilinear filtering. Everything else is off and/or as low as it can go.

Back to top

IP Logged

Reply #11 - Feb 3^rd, 2012 at 5:41am

michaelb15 Offline
Colonel
Whos that?
Lindsay, Ontario, Canada

Gender:
Posts: 946

Club508 wrote on Nov 26^th, 2011 at 11:25am:

I found another interesting "tweak" You can do with the weather to really shoot up performance.
Lower the visibility.
In the test I did, with unlimited visibility, it would jump in the ranges between 40-55 and 70-85 fps.
With 10 mile visibility, it jumped around in the ranges of 80-95, 140-155, and occaisionally jump to 190-210 fps when it was in the range of 140-155.
That's already +40 fps on the low end and about +70 fps or +125 fps on the high end!

If you want the specifications of the test, here they are:
Flight: Default Friday Harbor flight and position, going straight. default white with blue and gold. C172. day, 12:00 Local time, Summer. Default Clear weather.
Settings: 1024x768x32 resolution. Global texture quality=Maximum. Bilinear filtering. Everything else is off and/or as low as it can go.

Thankyou for this info. It is kinda good to know. I have been wondering if this would add to performance. Because it would make sense that a lower visibliltity would boost peformance. But I wasn't sure. but my tests may have been invalidated becuase of clouds.

But IRL, visibility is rarely greater then 10-20 miles. So keeping within these limits is a good thing to know! Thankyou!

I am somwhere I don't know where I am!!!&&

Back to top

IP Logged

	Search the archive: