Search the archive:
YaBB - Yet another Bulletin Board
 
   
 
Pages: 1 
Send Topic Print
Changing of the core system to 64 bit (Read 2268 times)
Apr 21st, 2010 at 9:02am

JBaymore   Offline
Global Moderator
Under the curse of the
hombuilt cockpit!

Gender: male
Posts: 10261
*****
 
I am about to upgrade my main sim computer an plan to run Win 7 64 bit.

Anyone have any experience with typical simpit peripherals or simpit software not working with a 64 bit Win7 OS?

Worried about the negative impacts of 64 bit.

best,

.................john
 

... ...Intel i7 960 quad 3.2G LGA 1366, Asus P6X58D Premium, 750W Corsair, 6 gig 1600 DDR3, Spinpoint 1TB 7200 HD, Caviar 500G 7200 HD, GTX275 1280M,  Logitec Z640, Win7 Pro 64b, CH Products yoke, pedals + throttle quad, simpit
IP Logged
 
Reply #1 - Apr 21st, 2010 at 10:53am

ermias   Offline
Colonel
KPHL/HHSB

Gender: male
Posts: 79
*****
 
John,

I haven't heard anything about using windows 7 and simpit software compatibility. But I share your concern.
I think FS9 should work with MS OS be it 86 or 64. But I do think addons not licensed by Microsoft may not work and there are many of them. My thought is if FSUIPC is compatible with Win 7 64bit and if the peripherals can be run in the network we are good to go. Now the crucial thing is going to be the main aircraft that you usually fly? Does it work in 64bit environment? 

I have been having similar question about upgrading to XP 64bit to have full utilization of my Ram which is 4Gigs. I have owned the software for a couple of years now, but I was hesitating for the above reasons.

May be the best thing is avoiding reinstalling and reconfiguring your existing system.  I would say install 7 with 64bit on another hard drive and see what happens with some of the software.  I might as well do that this summer.

Regards,

ermias


 

...
IP Logged
 
Reply #2 - Apr 21st, 2010 at 6:43pm

JBaymore   Offline
Global Moderator
Under the curse of the
hombuilt cockpit!

Gender: male
Posts: 10261
*****
 
ermias,

No... when I say upgrade... I mean UPGRADE.  Not only going to Win 7 64bit... but all new hardware from the ground up.  Everything.  My existing machine is a dinosaur to the max.

BUT.... if I have to redo the pit...... THAT would totally bust the budget.  Not to mention can I FIND what I need?  I'll be stretching the budget already on the core machine....no room for new interface cards or flight contriols right now.

I am absolutely SICK of not getting smooth stutter free fs2004 performance.  I have all the immersion of the pit.... and the sim screws that up too much for my tastes.  I spent a lot of time trying to make a silk purse out of a sow's ear with this existing old machine. 

It is past time time to move on. 

And Nick once told me that I should move to a 64 bit OS for sure at the same time I change machines.  Nick absolutely knows of what he speaks....... so I obey  Smiley.

So I have to see how much "damage" I'll do to all of the peripherals and background software in the process of the 64 bit change......before I committ to it  I want to take advantage of the 64 if possible.  But maybe I'll have to stay with the Win7 32.  We'll see.

best,

...................john

PS:  Any aircraft itself should work fine, I thought.  The aircraft is WITHIN the sim....not separate software.  If the sim works... the plane should work.
 

... ...Intel i7 960 quad 3.2G LGA 1366, Asus P6X58D Premium, 750W Corsair, 6 gig 1600 DDR3, Spinpoint 1TB 7200 HD, Caviar 500G 7200 HD, GTX275 1280M,  Logitec Z640, Win7 Pro 64b, CH Products yoke, pedals + throttle quad, simpit
IP Logged
 
Reply #3 - Apr 21st, 2010 at 8:16pm

Towerguy   Offline
Colonel
Auckland, New Zealand

Gender: male
Posts: 47
*****
 
I will watch with interest as this may be the path I will be following ... later .... maybe
 
IP Logged
 
Reply #4 - Apr 25th, 2010 at 6:00am

nemesis19   Offline
Colonel
BAe146-3OO G-JEBG FlyBe
LFBV

Posts: 26
*****
 
Hi John,

does this mean that you'll be going the FSX route as well ?

This may be advantageous, as with FSUIPC4 you can now access Lvars. This makes interfacing with the 146 systems, a lot easier, using Lua Plug-Ins.

I too am considering the Windows 7 route, at least for my main FS PC, the networked PC's will remain XP.

I think that most 32 bit Apps will work (some may need to be run in XP compatibility mode). Do the Hagstroms work with an .exe or a .dll ? If it's an .exe, then that shouldn't present a problem, apart from the PS/2 USB problem you have already itterated in the other thread. Do the Hagstroms need to be programmed each time they are started, or do they hold their programming until re-programmed ? If it's the latter, then you could work-around by programming on a compatible PC, then connect to the new one.

Regards,
...........Adrian W.
« Last Edit: Apr 26th, 2010 at 2:25pm by nemesis19 »  
IP Logged
 
Reply #5 - Apr 25th, 2010 at 10:24am

JBaymore   Offline
Global Moderator
Under the curse of the
hombuilt cockpit!

Gender: male
Posts: 10261
*****
 
Adrian,

Nope... no plans to go with FSX at the moment.... but the machine I will build (I am assured by people who know) will handle FSX pretty well.  It will be a "robust" machine Cheesy

I do own the "Gold Edition" of FSX.... still in the shrink wrap.

The first issue with FSX is that, at the moment, I am running a HUGE investment in payware for fs2004.  The list is very long. When you add all of that stuff into fs2004 it (at least to my eye) surpasses FSX straight out of the box for visuals and "effects".  To get what I'd want out of FSX (which I realize COULD easily exceed what fs2004 could ever have) I'd have to start putting extra money in there.  I'm spending it all on the machine  Wink.

The second issue is that the interfacing to the simpit is all based around fs2004.  I don't want to have to start re-doing all of that along with getting a new core machine up and running.  There will be many issues already.  Don't want any more right away.  And buying the new FSUIPC4 version for FSX is not in the budget either.  And so on and so on.

The Hagstrom cards only need re-programming when you want to change any key assignments.  So yes, I had already figured out the "work around" if the "PS2" adaptor on the ASUS P6X58D board that I will be using is one with the usb/PS2 gizmos that Hagstrom warned about.  ASUS does not have info available about exactly how that PS2 port is configured... already looked.

Yes, supposedly most 32 bit apps will work in Win 7 64-s compatibility mode...... but that won't be PROVEN until I try it  Roll Eyes.  I do expect some bumps in the road.

Like you, my other cockpit instrument networked PCs will remain XP also.

Likely with time.... I will migrate to FSX.  At least I am not pressured by FSXI showing up anytime soon  Lips Sealed.

I'm getting excited about this.  I'll order all the parts today or early tomorrow from Newegg.  "Hey mister, can you spare a dime?"

best,

..................john
 

... ...Intel i7 960 quad 3.2G LGA 1366, Asus P6X58D Premium, 750W Corsair, 6 gig 1600 DDR3, Spinpoint 1TB 7200 HD, Caviar 500G 7200 HD, GTX275 1280M,  Logitec Z640, Win7 Pro 64b, CH Products yoke, pedals + throttle quad, simpit
IP Logged
 
Reply #6 - Apr 26th, 2010 at 10:16am

JBaymore   Offline
Global Moderator
Under the curse of the
hombuilt cockpit!

Gender: male
Posts: 10261
*****
 
Well....... gulp!......... the new system (in parts form) is ordered.  Easy come easy go  Lips Sealed.  Of course there will be "Some parental assembly requiredGrin.

Core i7-960 Bloomfield 3.2 G LGA 1366 Quad core sitting on an ASUS P6X58D Premium mobo.  Bells and whistles to match.

best,

..............john
 

... ...Intel i7 960 quad 3.2G LGA 1366, Asus P6X58D Premium, 750W Corsair, 6 gig 1600 DDR3, Spinpoint 1TB 7200 HD, Caviar 500G 7200 HD, GTX275 1280M,  Logitec Z640, Win7 Pro 64b, CH Products yoke, pedals + throttle quad, simpit
IP Logged
 
Reply #7 - Apr 26th, 2010 at 1:21pm

nemesis19   Offline
Colonel
BAe146-3OO G-JEBG FlyBe
LFBV

Posts: 26
*****
 
Of course John, you could keep the old PC as part of the cockpit network, leave the Hagstroms connected to it and send the values across via WideFS.

regards,
...........Adrian W.
 
IP Logged
 
Reply #8 - Apr 28th, 2010 at 11:35pm

JBaymore   Offline
Global Moderator
Under the curse of the
hombuilt cockpit!

Gender: male
Posts: 10261
*****
 
All the parts arrived this morning.  Cheesy   Soon the assembly starts.

best,

...................john
 

... ...Intel i7 960 quad 3.2G LGA 1366, Asus P6X58D Premium, 750W Corsair, 6 gig 1600 DDR3, Spinpoint 1TB 7200 HD, Caviar 500G 7200 HD, GTX275 1280M,  Logitec Z640, Win7 Pro 64b, CH Products yoke, pedals + throttle quad, simpit
IP Logged
 
Reply #9 - Apr 29th, 2010 at 2:24am

nemesis19   Offline
Colonel
BAe146-3OO G-JEBG FlyBe
LFBV

Posts: 26
*****
 
The longest part of that will be installing Windoze Smiley

Regards,
............Adrian W.
 
IP Logged
 
Reply #10 - Apr 29th, 2010 at 8:12pm

beaky   Offline
Global Moderator
Uhhhh.... yup!
Newark, NJ USA

Gender: male
Posts: 14187
*****
 
Good luck... glad you found another way to ensure that "it's never really finished", LOL.
 

...
IP Logged
 
Reply #11 - Apr 29th, 2010 at 11:53pm

JBaymore   Offline
Global Moderator
Under the curse of the
hombuilt cockpit!

Gender: male
Posts: 10261
*****
 
The build began....... it will continue...... the Beast begins to take shape.

Wink
 

... ...Intel i7 960 quad 3.2G LGA 1366, Asus P6X58D Premium, 750W Corsair, 6 gig 1600 DDR3, Spinpoint 1TB 7200 HD, Caviar 500G 7200 HD, GTX275 1280M,  Logitec Z640, Win7 Pro 64b, CH Products yoke, pedals + throttle quad, simpit
IP Logged
 
Reply #12 - Apr 30th, 2010 at 9:13am

ermias   Offline
Colonel
KPHL/HHSB

Gender: male
Posts: 79
*****
 
John,

Good luck with everything.

Regards,

Ermias
 

...
IP Logged
 
Reply #13 - May 20th, 2010 at 4:09pm

JBaymore   Offline
Global Moderator
Under the curse of the
hombuilt cockpit!

Gender: male
Posts: 10261
*****
 
The Beast is alive!:

...


best,

..................john


 

... ...Intel i7 960 quad 3.2G LGA 1366, Asus P6X58D Premium, 750W Corsair, 6 gig 1600 DDR3, Spinpoint 1TB 7200 HD, Caviar 500G 7200 HD, GTX275 1280M,  Logitec Z640, Win7 Pro 64b, CH Products yoke, pedals + throttle quad, simpit
IP Logged
 
Reply #14 - May 20th, 2010 at 5:02pm

ermias   Offline
Colonel
KPHL/HHSB

Gender: male
Posts: 79
*****
 
John,

Finally it is "ON AIR" congrats! Did you get to test it? What are the specs? The best thing about upgrading processor, memory and graphic card is smoothness and the ability to do any setting change without a worry of stater or frame rate drop. Now the barrier is broken.  Can't wait to hear more about it.

ermias
 

...
IP Logged
 
Reply #15 - May 20th, 2010 at 5:30pm

nemesis19   Offline
Colonel
BAe146-3OO G-JEBG FlyBe
LFBV

Posts: 26
*****
 
Feels good, doesn't it  Cheesy Cheesy Cheesy
 
IP Logged
 
Reply #16 - May 20th, 2010 at 6:25pm

JBaymore   Offline
Global Moderator
Under the curse of the
hombuilt cockpit!

Gender: male
Posts: 10261
*****
 
Oh yeah!  Cheesy
 

... ...Intel i7 960 quad 3.2G LGA 1366, Asus P6X58D Premium, 750W Corsair, 6 gig 1600 DDR3, Spinpoint 1TB 7200 HD, Caviar 500G 7200 HD, GTX275 1280M,  Logitec Z640, Win7 Pro 64b, CH Products yoke, pedals + throttle quad, simpit
IP Logged
 
Reply #17 - Jun 5th, 2010 at 10:24am

UnkieDude   Offline
Colonel
I Like Flight Simulation!

Posts: 40
*****
 
J,

When I win the lottery Im gonna hire you to build my simpit.

Notice I said "When I win the lottery"?  Confidence!

Nice looking rig there.  Maybe I could test it out one day.  I'll bring the beer.

The Evil Unkie Speaks!
 
IP Logged
 
Pages: 1 
Send Topic Print