Search the archive:
YaBB - Yet another Bulletin Board
 
   
 
Pages: 1 2 3 4 
Send Topic Print
F-18 Warhawks(help please?) (Read 9815 times)
Reply #30 - Dec 16th, 2008 at 3:32pm

Arkycharlie   Offline
Colonel
Fly FS

Gender: female
Posts: 18
*****
 
well, that was a dead end, I'm afraid.  Apparently, the chrome.bmp file is related to reflectivity, and has nothing to do with the interior transparency issue.  The 'sh_vc04.bmp' file has been the center of a lot of my attention because it just looks like the right file, but no amount of tweaking on it has done any good for me.  Hope you have better luck!

charlie
 
IP Logged
 
Reply #31 - Dec 16th, 2008 at 3:57pm

Hagar   Offline
Colonel
My Spitfire Girl
Costa Geriatrica

Posts: 33159
*****
 
Quote:
Just a shot in the blue but maybe this plane doesn't have a "vcglass.bmp" texture?

As nobody else has come forward I might be able to save you all a lot of head scratching. I've messed around creating aircraft for CFS2 & FS2002/4 but this was some time ago & I've forgotten most of it. I never used a texture for the cockpit transparency but defined it in the MDL. I believe this type of transparency does not display properly in the FSX graphics engine. I suspect this is the same with the F-18 you're playing with in which case you're wasting your time. Unfortunately I can't check it out myself as I only have the FSX Demo. Of course, I would be delighted to be proved wrong.

No names, no pack drill but I note that this "update"was uploaded by someone who has upset a lot of people in the past.
 

...

Founder & Sole Member - Grumpy's Over the Hill Club for Veteran Virtual Aviators
Member of the Fox Four Group

Need help? Try Grumpy's Lair

My photo gallery
IP Logged
 
Reply #32 - Dec 16th, 2008 at 4:01pm

ShaneG   Offline
Colonel
I turned into a Martian!

Posts: 10000
*****
 
I thought it had something to do with the model itself, thanks Hagar! Smiley
I've never run into this kind of texture until now, hope I don't see one like it again anytime soon. Grin I'll just stick with the Accel F-18. Wink

Sorry Razgriz, we did our best with this one, but I feel we've reached our end with it. Sad
 
IP Logged
 
Reply #33 - Dec 16th, 2008 at 4:09pm

Hagar   Offline
Colonel
My Spitfire Girl
Costa Geriatrica

Posts: 33159
*****
 
ShaneG wrote on Dec 16th, 2008 at 4:01pm:
I thought it had something to do with the model itself, thanks Hagar! Smiley
I've never run into this kind of texture until now, hope I don't see one like it again anytime soon. Grin I'll just stick with the Accel F-18. Wink

If I'm correct there's no texture involved. The windscreen & canopy are defined as transparent parts.
 

...

Founder & Sole Member - Grumpy's Over the Hill Club for Veteran Virtual Aviators
Member of the Fox Four Group

Need help? Try Grumpy's Lair

My photo gallery
IP Logged
 
Reply #34 - Dec 16th, 2008 at 4:23pm

Razgriz227   Offline
Colonel
Fly FS

Posts: 22
*****
 
Yeah dont worry about it guys,
I really apprciated all the help i guess im just stuck with the Accel.
Not that i have a problem with it i just wanted a Super Hornet.
So thanks for the help!!!!!!!!!

Christian

P.S. if anyone wants to try to make this let me know
http://www.simviation.com/cgi-bin/yabb2/YaBB.pl?num=1229291789
 
IP Logged
 
Reply #35 - Dec 16th, 2008 at 5:05pm

Arkycharlie   Offline
Colonel
Fly FS

Gender: female
Posts: 18
*****
 
Hagar, many thanks for the input.  I was beginning to suspect something exactly along the lines of what you described.  
 
IP Logged
 
Reply #36 - Jan 9th, 2009 at 3:21am

StACAttack   Offline
Colonel
I Fly Sim!

Gender: male
Posts: 10
*****
 
Wii wrote on Dec 15th, 2008 at 11:58pm:
StACAttack wrote on Dec 15th, 2008 at 3:54pm:
You could maybe download MDLMat and change the material of the glass? I can't seem to work it though...

http://www.mnwright.btinternet.co.uk/download/MDLMat.zip

Program is for MDL's not BMP Wink
PS: you hit the "FTP" link no the "URL" link Wink
Yes, very strange, I can't seem to get them to work but the guy who posted them says in the readme he has FSX SP2 and it works fine... does it require accel maybe? Undecided I don't have accel and I really want an F-18 Lips Sealed


I think we've established that this is not a texture problem - Hence the Idea that it is a model problem.
 
IP Logged
 
Reply #37 - Jan 22nd, 2009 at 5:00pm

HarvesteR   Offline
Colonel
F/A-18 HARV    Almost
has my name on it!
Mexico, DF :D

Gender: male
Posts: 707
*****
 
Arkycharlie wrote on Dec 16th, 2008 at 1:11pm:
I notice that when the war hawks aircraft opens in vc mode, the cockpit is clear for a second, then turns black.  This is probably an indication of the problem, but I haven't figured out just what it means yet.  


this probably means that the geometry of the glass was made transparent in Max or whatever, but when the texture loads it overrides the transparency of the material replacing it by it's own alpha channel


just a thought... is it possible that this glass could have been mapped to a small corner of some texture map? seems plausible if the author didn't want to lose too much time mapping a big texture to transparent glass, he might just have mapped it to some small corner of one of the texture maps, which might be under a solid alpha map... then it would be a matter of finding out where it's hidden and painting the alpha channel transparent on that section of the map
 

Cheesy NEW PC SPECS: Intel Core i7 920 - 6GB Corsair DDR3 PC12800 RAM- Intel DX58SO Mobo - Geforce GTX 460 768MB GDDR5 - 3x LG1952h LCDs through Matrox's TH2Go - 640GB Seagate Barracuda 7200Rpm  - 200GB Maxtor 7200Rpm - Microsoft Sidewinder X6 Keyboard - 5.1 Surround and a Saitek X52 Pro and Pro Flight Rudder Pedals  -- Running Windows 7 Ultimate x64

My 8800 GTX has at last retired... may it rest in peace in GPU heaven.
IP Logged
 
Reply #38 - Feb 3rd, 2009 at 3:58pm

USMC_BEANS   Offline
Colonel

Gender: male
Posts: 164
*****
 
I also wonder why we can see out of the HUD but not the rest of the canopy.
 
IP Logged
 
Reply #39 - Feb 10th, 2009 at 1:18am

USMC_BEANS   Offline
Colonel

Gender: male
Posts: 164
*****
 
I was messing around with the alpha channels when I noticed that the canopy doesn't start out black, but it snaps to it like a loading texture.  I think we just have to find out which texture it is.
 
IP Logged
 
Reply #40 - Feb 10th, 2009 at 8:34pm

Jim Hodkinson   Offline
Colonel
Hello!
Manchester U.K

Gender: male
Posts: 57
*****
 
Hi

Having to much time on my hands, I decided to see if I could assist with the problem, now I don’t know if the file has been updated, or what specs your PC has, but after unzipping the file and copying it into FSX I have no canopy transparency problems at all in the VC view.

The file I used was downloaded using the link provided in the first page of this post, and if I got the correct one the file name is FSXF-18F_Warhawks.zip, and the zip file weighs in at 44,948kb.


For information my specs are

Windows XP Home + SP3 32 bit
FSX+SP2 (not Acceleration)
AMD dual core 4400+ 32 bit
2GB dual channel memory
512MB Nvidia GT8500 (with nvidia 181.22 drivers and Nhancer set up as Nick’s post)

I hope the information is of some use, and that it helps.

Jim Hodkinson
 
IP Logged
 
Reply #41 - Feb 11th, 2009 at 1:38am

USMC_BEANS   Offline
Colonel

Gender: male
Posts: 164
*****
 
I was actually trying the FS KBT F/A-18E, but went and tried this package as well.  Still no joy.  Black canopy.
 
IP Logged
 
Reply #42 - Feb 11th, 2009 at 8:43am

Jim Hodkinson   Offline
Colonel
Hello!
Manchester U.K

Gender: male
Posts: 57
*****
 
Hi

I really don’t know what to say, the download I used has no transparency problems on my rig, so I can’t offer a solution to what I don’t see.

The only thing that I can suggest is for finding out what texture does what is an old repainting trick for finding individual parts in a repaint kit if the part you want is not obviously visible, which is to get the texture file (in this case use a backup copy) and in your favourite painting program, put lines of one or two pixels width spaced roughly 10 to 20 pixels apart horizontally and vertically to make a grid, and make each line a different colour, but every say 20th line place the same preferably bold colour, to give you a reference, that way you may be able to track down where and on what texture the canopy is, that is if it’s texture at all and not part of the mdl file.

Not much help I’m afraid, but the best I can offer for now.

Jim Hodkinson
 
IP Logged
 
Reply #43 - Feb 11th, 2009 at 10:58am

putte   Offline
1st Lieutenant
Fly FS
Norway

Gender: male
Posts: 2
****
 
Hi
Just a wild guess. As some have no problems and other have, could it be something with the rig? I have a nVidia card and I am unable to look out of the VC.

putte
 
IP Logged
 
Reply #44 - Feb 11th, 2009 at 1:39pm

USMC_BEANS   Offline
Colonel

Gender: male
Posts: 164
*****
 
My rig is:
8800GT with 512
Q6600
4 GB RAM
Vista Ultimate 32 bit
FSX with Acceleration
 
IP Logged
 
Pages: 1 2 3 4 
Send Topic Print