Simviation Forum | |
/yabb
Current Flight Simulator Series >> FS 2004 - A Century of Flight >> Can't fly into Beijing airspace /yabb?num=1359071688 Message started by AirAmerica on Jan 24th, 2013 at 6:54pm |
Title: Can't fly into Beijing airspace Post by AirAmerica on Jan 24th, 2013 at 6:54pm
I can't seam to approach Beijing (ZBAA) without FS9 crashing. Sometimes I can start FS9 at ZBAA and it will run for a few minutes, then crash. I've tried changing time of day thinking an add-on a/c is the problem. I've changed to a default FS9 a/c with the same results. I tried reducing the terrain complexity and mesh with no luck. I've tried to fly into the ZBAA airspace from 50 miles away - sometimes I can fly for 2 or 3 minutes, then FS9 goes to a black screen and crashes.
No other area has this problem that I can find. Also can't find a similar issue searching various help forums. Any trouble shooting ideas or a different approach to solving this mystery are appreciated. |
Title: Re: Can't fly into Beijing airspace Post by Webb on Jan 27th, 2013 at 3:25pm
It could be a bad .bgl file.
Unfortunately I don't know how you could detect or repair this in FS04. There is a BGL scanner that was made for FS02 but I don't know if it works with FS04. |
Title: Re: Can't fly into Beijing airspace Post by EVVFCX on Jan 29th, 2013 at 5:27pm
Hi
you could use the afcad for fs9 and open that airport,from memory it gives the bgl file being used for the original, Area flies OK on mine. Normally I could look this up for you but the pc the airport designer is on is out of use at the moment. regards steve |
Title: Re: Can't fly into Beijing airspace Post by c130lover on Jan 29th, 2013 at 5:44pm
Sounds like a political problem to me. Try negotiating a trade agreement with Beijing.
|
Simviation Forum » Powered by YaBB 2.5 AE! YaBB Forum Software © 2000-2010. All Rights Reserved. |