Simviation Forum - Print Page

Simviation Forum
/yabb Current Flight Simulator Series >> Adding Aircraft Traffic (AI) & Gates >> how to get the gates to move into position /yabb?num=1298326666 Message started by bombardier on Feb 21^st, 2011 at 5:17pm

Title: how to get the gates to move into position
Post by bombardier on Feb 21^st, 2011 at 5:17pm

hello: I thought this subject was brought up in another thread I could be wrong.

I just landed at heathrow international stopped at the gate and hope to see the gate move into position but nothing. could I be I'm at the wrong gate.

Title: Re: how to get the gates to move into position
Post by tgibson on Feb 21^st, 2011 at 7:12pm

Press Ctrl J

Hope this helps,

Title: Re: how to get the gates to move into position
Post by Steve M on Feb 21^st, 2011 at 7:49pm

Also you need to be parked right on the numbers, if I remember correctly.

Title: Re: how to get the gates to move into position
Post by bombardier on Feb 22^nd, 2011 at 2:01pm

I thought I saw a post on how to move the gates but I do not know where.

thanks for the tips I'll try them out.

also I do fly in free flight and most of the time I need to guess what gate to go to because I cannot get the tower to speak to me and tell me what gate to go to or that matter how to set up the radio stack so I can here if the tower calls me but even if the tower calls me theres no way to speak to the tower.
for example my final approach or getting clearance for take off or landing.

Title: Re: how to get the gates to move into position
Post by eldar on Oct 10^th, 2011 at 9:29am

scroll lock is for atc window try 8-) :) ;D ;) [smiley=thumbsup.gif] [smiley=grin.gif]