Post by rottydaddy on Sep 15th, 2006 at 3:46pm
Naturally, as soon as I got my mitts on all that aluminum, everything changed...
The curve of the frame suggested the right shape for a sort of "half panel"... in retrospect, i wish I hadn't cut it, because Ive changed my mind again.
But it's all good: I can re-join that without much fuss.
An early idea... stood on end, the cap is more than tall enough. I started with this "clamshell" idea initially, but nixed that as well...
That wood you see is a support leg for my sleeping/home theater loft; one design parameter is that htis thing must fit between two support legs, under the loft.
Here's a sketch of what I think I will actually make, based on the parts available mated with a plywood box for the nose. To make it work with the cap pieces, I'll have to make the overhead out of wood, also.
The plywood will probably be skinned in Masonite, fake rivet-heads added here and there, and painted gloss aluminum. Some areas will get whatever spare sheet I have, for real and fake access panels, etc. I'll add a few grilles so I don't suffocate in there; maybe some fans at some point.
There will likely be a couple of windows, glazed with some cool translucent smoke-finish plastic I found. It's very bendable, so I'll be able to glaze the curve near the roof line. This will allow just a little ambient light inside and create the illusion of proper windows, but I won't be able to make out what's outside, so it won't spoil the "immersion effect".
The point of the built-up nose is partly to allow me to later put aone or two-mirror projection setup... if I can find a decent used DLP projection TV, I'll just hack that and cram it in there, or rebuild the nose if necessary to accomodate that. for now I'll be happy enough with a 20" widescreen LCD, which I'll be ordering soon, along with the rest of the parts for the new rig. the new PC, BTW, will live outside the sim enclosure... with a KVM switch, I'll be able to control it from my existing workstation when needed.
This whole thing will be made so that it breaks down fairly easily: the top of the nose will come off so I can work behind the panel, and the entire nose will separate from the aluminum part.
I've been going blind looking at flight deck/cockpit photos, and have decided the interior colors will be zinc chromate-looking light green on all interior aluminum (no, I don't want to strip and actually chromate the sheet); dark ("army") green for all platforms, housings, etc. ; the panel will be dark green or black, with a strip of wood on the bottom part (probably stained dark red). Might put some dark red carpet on the floor near the pedals... we'll see. First I have to at least get the simulator core built and running.
Well, now that I've revealed my mad scheme, I'll have to follow through and finish this thing. No idea how long it will take, but here's the plan:
1: Mount the pedals and seat on a (2-part) deck and paint them
2: Build main sim box
3: Add side boxes near seat, quadrant housing, etc.
4:Final panel layout and fabrication
5: Add electronics/ mechanicals
6: Test, tweak, mod
7: Build enclosure
Next: part 3- building
The curve of the frame suggested the right shape for a sort of "half panel"... in retrospect, i wish I hadn't cut it, because Ive changed my mind again.
But it's all good: I can re-join that without much fuss.
An early idea... stood on end, the cap is more than tall enough. I started with this "clamshell" idea initially, but nixed that as well...
That wood you see is a support leg for my sleeping/home theater loft; one design parameter is that htis thing must fit between two support legs, under the loft.
Here's a sketch of what I think I will actually make, based on the parts available mated with a plywood box for the nose. To make it work with the cap pieces, I'll have to make the overhead out of wood, also.
The plywood will probably be skinned in Masonite, fake rivet-heads added here and there, and painted gloss aluminum. Some areas will get whatever spare sheet I have, for real and fake access panels, etc. I'll add a few grilles so I don't suffocate in there; maybe some fans at some point.
There will likely be a couple of windows, glazed with some cool translucent smoke-finish plastic I found. It's very bendable, so I'll be able to glaze the curve near the roof line. This will allow just a little ambient light inside and create the illusion of proper windows, but I won't be able to make out what's outside, so it won't spoil the "immersion effect".
The point of the built-up nose is partly to allow me to later put aone or two-mirror projection setup... if I can find a decent used DLP projection TV, I'll just hack that and cram it in there, or rebuild the nose if necessary to accomodate that. for now I'll be happy enough with a 20" widescreen LCD, which I'll be ordering soon, along with the rest of the parts for the new rig. the new PC, BTW, will live outside the sim enclosure... with a KVM switch, I'll be able to control it from my existing workstation when needed.
This whole thing will be made so that it breaks down fairly easily: the top of the nose will come off so I can work behind the panel, and the entire nose will separate from the aluminum part.
I've been going blind looking at flight deck/cockpit photos, and have decided the interior colors will be zinc chromate-looking light green on all interior aluminum (no, I don't want to strip and actually chromate the sheet); dark ("army") green for all platforms, housings, etc. ; the panel will be dark green or black, with a strip of wood on the bottom part (probably stained dark red). Might put some dark red carpet on the floor near the pedals... we'll see. First I have to at least get the simulator core built and running.
Well, now that I've revealed my mad scheme, I'll have to follow through and finish this thing. No idea how long it will take, but here's the plan:
1: Mount the pedals and seat on a (2-part) deck and paint them
2: Build main sim box
3: Add side boxes near seat, quadrant housing, etc.
4:Final panel layout and fabrication
5: Add electronics/ mechanicals
6: Test, tweak, mod
7: Build enclosure
Next: part 3- building